G190EAN01.3.pdf 데이터시트 (총 24 페이지) - 파일 다운로드 G190EAN01.3 데이타시트 다운로드

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specifications
(v) Final Specifications
Module
Model Name
19 Inch Color TFT-LCD
G190EAN01.3
G190EAN01.3
Customer
Date
Checked &
Approved by
Date
Customer’s sign back page
Approved by
Date
Crystal Hsieh
2017/ 7/ 5
Prepared by
Date
Ginger Lin
2017/ 7/ 5
General Display Business Unit /
AU Optronics corporation
G190EAN01.3 ver.0
1/24
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/07/28

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Contents
G190EAN01.3
1. Operating Precautions ....................................................................................4
2. General Description..........................................................................................5
2.1 Display Characteristics....................................................................................................... 5
2.2 Optical Characteristics ....................................................................................................... 6
3. Functional Block Diagram................................................................................9
4. Absolute Maximum Ratings ...........................................................................10
4.1 Absolute Ratings of TFT LCD Module.............................................................................. 10
4.2 Absolute Ratings of Environment..................................................................................... 10
5. Electrical Characteristics ...............................................................................11
5.1 TFT LCD Module ............................................................................................................. 11
5.2 Backlight Unit ................................................................................................................... 13
6. Signal Characteristic ......................................................................................15
6.1 Pixel Format Image.......................................................................................................... 15
6.2 Scanning Direction........................................................................................................... 15
6.3 Signal Description ............................................................................................................ 16
6.4 The Input Data Format..................................................................................................... 18
6.5 Interface Timing ............................................................................................................... 19
6.6 Power ON/OFF Sequence ............................................................................................... 20
7. Reliability Test Criteria ...................................................................................21
8. Mechanical Characteristics............................................................................22
8.1 LCM Outline Dimension ................................................................................................... 22
9. Label and Packaging ......................................................................................24
9.1 Shipping Label (on the rear side of TFT-LCD display) ..................................................... 24
9.2 Carton Package ............................................................................................................... 24
G190EAN01.3 ver.0
2/24
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/07/28

No Preview Available !

Record of Revision
Version
Date
(yyyy/m/d)
Page
0
2017/ 7/ 5
All
Product Specification
AU OPTRONICS CORPORATION
Old description
First draft specification
G190EAN01.3
New Description
G190EAN01.3 ver.0
3/24
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/07/28

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
G190EAN01.3
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard
surface.
6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling TFT-LCD
Module.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken out from the
container, do not press the center of the LED light bar edge. Instead, press at the far ends of the
LED light bar edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very short
time. Please design your display product well to avoid external force applying to module by end-user
directly.
12) Small amount of materials having no flammability grade is used in the LCD module. The LCD module
should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950),
or be applied exemption.
13) Severe temperature condition may result in different luminance, response time and lamp ignition voltage.
14) Continuous operating TFT-LCD display under low temperature environment may accelerate lamp
exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when LCD module is placed in landscape position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use screen saver or
shuffle content periodically if fixed pattern is displayed on the screen.
G190EAN01.3 ver.0
4/24
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/07/28

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
G190EAN01.3
2. General Description
This specification applies to the Color Active Matrix Liquid Crystal Display G190EAN01.3 composed of a
TFT-LCD display, a driver and power supply circuit, and a LED backlight system. The screen format is
intended to support the SXGA (1280(H) x 1024(V)) screen and 16.7M colors. All input signals are
2-channel LVDS interface compatible. LED driving board for backlight unit is included in G190EAN01.3.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 oC condition:
Items
Screen Diagonal
Active Area
Resolution
Pixel Pitch
Pixel Arrangement
Display Mode
Nominal Input Voltage VDD
Power Consumption
Weight
Physical Size
Electrical Interface
Surface Treatment
Unit
[inch]
[mm]
[mm]
[Volt]
[Watt]
[Grams]
[mm]
Specifications
19”
376.32 (H) x 301.06 (V)
1280(x3) x 1024
0.294 (per one triad) x 0.294
R.G.B. Vertical Stripe
Normally Black, AHVA
+5.0 V
Logic: max. 4W@ white pattern
BL power: max. 11.5 W
1700 +/- 150g
396 (H) x 324 (V) x 15.3 (D) (Typ)
LVDS
Anti-Glare treatment
Support Color
Temperature Range
Operating
Storage (Non-Operating)
RoHS Compliance
16.7M colors (8bit)
[oC] 0 to +50
[oC] -20 to +60
Yes
G190EAN01.3 ver.0
5/24
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/07/28