T1010B01X00.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 T1010B01X00 데이타시트 다운로드

No Preview Available !

Product Specification
T1010B01X00
(REVISION 12)
Crystal Clear Technology sdn. bhd.
16 Jalan TP5, Taman Perindustrian Sime UEP,
47600 Subang Jaya, Selangor DE
Malaysia.
T: +603 80247099 website: www.cct.com.my

No Preview Available !

CRYSTAL CLEAR TECHNOLOGY SDN. BHD.
Spec. No: T1010B01X00 REV12
1.0 Table of Content
Page
1. Table of Content
1
2. Record of Revision
2
3. General Specification
3
4. Absolute Maximum Ratings
4
5. Electrical Characteristics
5~7
6. Interface Connection
8 ~ 10
7. Input Signal (DE Mode Only)
10 ~ 11
8. Mechanical Specification
12 ~ 14
9. Optical Characteristics
15 ~ 16
10. Reliability Test.
17 ~ 18
11. Precaution and limited warranty
19 ~ 23
12. Attachment:
01. Capacitive Touch Panel Specification.
24 ~ 31
1

No Preview Available !

CRYSTAL CLEAR TECHNOLOGY SDN. BHD.
Spec. No: T1010B01X00 REV12
2.0 Record of Revision
Rev Date
Item Page Comment
1 29/04/15
Preliminary
2 06/06/15 Mechanical spec.
12 Update CTP design
3 12/06/15 Add Gamma Voltage information
4 30/06/15 Add CTP pin out
5
5 30/06/15 Change CTP pin out
9
6 17/08/15 Add CTP specification
9
7 26/08/15 Update Mechanical Specification
12 Attachment
Update CTP spec
Change backlight wire
Add Precaution
length
8 09/09/15 Gamma Voltage
18 Overall
9 12/10/15 Backlight Specification
5
Update Mechanical Spec
7
10 10/12/15 Pin Assignment
12
CTP General Spec
3
11 11/05/16 Change display area dimension,
25 Backlight pin A and K
change module size thickness,
update drawing, change precaution
for using TFT module, and add
CCT website front page.
12 30/07/16 Change model name
T1010B01W01 to T1010B01X00
2

No Preview Available !

CRYSTAL CLEAR TECHNOLOGY SDN. BHD.
Spec. No: T1010B01X00 REV12
3.0 General Specification
T1010B01W01 is 10.1” colour TFT-LCD (Thin Film Transistor Liquid Crystal
Display) module composed of LCD panel, driver ICs control circuit, LED backlight,
CTP and cover lens. By applying 1024×600 images are displayed on the 10.1”
diagonal screen. Display 16.2M colours by R.G.B signal input.
General Specification are summarized in the following table:
ITEM
SPECIFICATION
Display Area (mm)
222.72 (W) x 125.28 (H)
Number of Pixels
1024(H) (RGB) x 600 (V)
Colour Pixel Arrangement
RGB vertical Stripe
Display Mode
Normal White
Number of colour
16.2M
Brightness (cd/m2)
250 (typ)
Response Time (ms)
20ms (typ)
Contrast Ratio
500 : 1 (min)
Viewing angle (CR≥10)
140° (Horizontal)
120° (Vertical)
Optimum Viewing Direction
6 O’clock (Grey Level Inversion)
Power Consumption (mW)
480 (typ)
Interface Connection
LVDS
Module Size (mm)
247 (W) x 152 (H) x 6.5 (D)
Module Weight (g)
350
Surface Treatment
Anti-Glare
REMARK
1
3
2
Note1: Colour tone is slightly changed by temperature and driving voltage.
Note2: Include CTP and cover lens. FPC or wire are not included.
Note3: Brightness on LCD surface. Module with CTP or RTP and cover lens,
brightness will be about 20% (max) lower on the TP or cover lens surface.
3

No Preview Available !

CRYSTAL CLEAR TECHNOLOGY SDN. BHD.
Spec. No: T1010B01X00 REV12
4.0 Absolute Maximum Ratings
Item
Digital Supply Voltage
Analog Supply Voltage
Gate On Voltage
Gate off Voltage
Gate on-Gate Off Voltage
Signal Input Voltage
Forward Current(per LED)
Reverse Voltage (per LED
Pulse Forward Current (per LED)
Symbol
VDD
VDD_LVDS
AVDD
VGH
VGL
VGH-VGL
NIN0 ~ NIN2
PIN0 ~ PIN2
NINC, PINC
If
VR
Ifp
Min
-0.3
-0.5
-0.3
-20
-0.3
-0.5
-
-
-
Max Unit Note
5V
15 V
42 V
0.3 V
40 V
5V
30 mA
5V
100 mA Note1,2
Note 1: Ifp Conditions: Pulse Width ≤10msec; Duty ≤1/10.
Note 2: Operating must be under below condition.
(Ambient Temperature/Allowable Forward Current) Each LEDLG
4