2SA2184.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 2SA2184 데이타시트 다운로드

No Preview Available !

TOSHIBA Transistor Silicon PNP Triple Diffused Type
2SA2184
High Voltage Switching Applications
High voltage: VCEO = -550 V
High speed: tf = 40 ns (typ.) (IC = -0.5 A)
2SA2184
Unit: mm
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO
-550
V
Collector-emitter voltage
VCEO
-550
V
Emitter-base voltage
VEBO -7 V
Collector current
DC
Pulse
IC
ICP
-1
A
-2
Base current
IB -1 A
Collector power
dissipation
Ta = 25°C
Tc = 25°C
Junction temperature
Storage temperature range
PC
Tj
Tstg
1
20
150
-55 to 150
W
°C
°C
JEDEC
JEITA
TOSHIBA
2-7J1A
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
Weight: 0.36 g (typ.)
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are
within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Start of commercial production
2005-09
1 2017-01-06

No Preview Available !

2SA2184
Electrical Characteristics (Ta = 25°C)
Characteristics
Collector cut-off current
Emitter cut-off current
Collector-emitter breakdown voltage
DC current gain
Collector emitter saturation voltage
Base-emitter saturation voltage
Transition frequency
Collector output capacitance
Rise time
Switching time Storage time
Symbol
Test Condition
ICBO
IEBO
V(BR)CEO
hFE(1)
hFE(2)
VCE(sat)
VBE(sat)
fT
Cob
VCB = -550 V, IE = 0 A
VEB = -7 V, IC = 0 A
IC = -10 mA, IB = 0 A
VCE = -5 V, IC = -100 mA
VCE = -5 V, IC = -500 mA
IC = -300 mA, IB = -60 mA
IC = -300 mA, IB = -60 mA
VCE = -5 V, IC = -50 mA
VCB = -10 V, IE = 0 A, f = 1 MHz
Min Typ. Max Unit
― ― -10 μA
― ― -1 μA
-550
V
80 300
5 ――
― ― -0.7 V
― ― -1.2 V
27 MHZ
30 pF
tr
IB1
20 μs Input
Output
0.1
IB2 IB2
μs
tstg VCC = -300 V 1.6
Fall time
IB1 = 100 mA, IB2 = 200 mA
tf Duty cycle 1%
40 ns
Marking
A2184
Part No. (or abbreviation code)
Lot No.
Note 1
Note 1: A line under a Lot No. identifies the indication of product Labels
[[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to
environmental matters such as the RoHS compatibility of Product.
The RoHS is Directive 2011/65/EU of the European Parliament and
of the Council of 8 June 2011 on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
2 2017-01-06

No Preview Available !

IC – VCE
-1
-10 mA
-0.8
-20 mA
-0.6
-15 mA
-5 mA
-4 mA
-3 mA
-0.4
-0.2
0
0
-2 mA
IB = 1 mA
COMMON EMITTER
Tc = 25 °C
SINGLE NONREPETITIVE PULSE
-10 -20 -30 -40 -50
COLLECTOR-EMITTER VOLTAGE VCE (V)
2SA2184
1000
100
10
hFE – IC
Tc = 100 °C
25°C
-55°C
1
COMMON EMITTER
VCE = -5 V
SINGLE NONREPETITIVE PULSE
0.1
-0.001
-0.01
-0.1
-1
COLLECTOR CURRENT IC (A)
-10
VCE(sat) – IC
-100
COMMON EMITTER
IC / IB = 5
SINGLE NONREPETITIVE PULSE
-10
-1
-0.1 Tc = 100 °C
25 °C
-0.01
-0.001
-55 °C
-0.01
-0.1
-1
COLLECTOR CURRENT IC (A)
-10
VBE(sat) – IC
-10
-1 Tc = -55°C
25°C
-0.1
100 °C
-0.01
-0.001
COMMON EMITTER
IC / IB = 5
SINGLE NONREPETITIVE PULSE
-0.01
-0.1
-1
COLLECTOR CURRENT IC (A)
IC – VBE
-1.0
COMMON EMITTER
VCE = -5 V
SINGLE NONREPETITIVE PULSE
-0.8
-0.6
Tc = 100°C
-0.4 25°C
-0.2 -55 °C
0
0 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2
BASE-EMITTER VOLTAGE VBE (V)
1000
fT – IC
COMMON EMITTER
Tc = 25 °C
100
VCE = -10 V
-5 V
10
1
-0.001
-0.01
-0.1
COLLECTOR CURRENT IC (A)
-1
3 2017-01-06

No Preview Available !

1000
100
Cob – VCB
f = 1MHZ
Tc = 25 °C
IE = 0
10
1
0
-0.1
-1
-10
-100
-1000
COLLECTOR-BASE VOLTAGE VCB (V)
2SA2184
Pc – Ta
25
Ta=Tc
Infinite heat sink
20
15
10
5
0
0 20 40 60 80 100 120 140 160
AMBIENT TEMPERATURE Ta (°C)
rth – tw
10
1
0.1
0.001
0.01
Curves apply only to limited areas of thermal
resistance. (single nonrepetitive pulse)
Tc = 25 °C
0.1 1 10
PULSE WIDTH tw (s)
SAFE OPERATING AREA
-10
IC max (PULSE)*
10 ms* 1 ms*
-1
IC max (CONTINUOUS)
100 μs*
100 ms*
-0.1
DC OPERATION
Tc = 25 °C
-0.01
*:Single nonrepetitive pulse
Tc = 25°C
Curves must be derated
linearly with increase in
-0.001 temperature.
-0.1 -1 -10
VCEO max
-100
-1000
COLLECTOR-EMITTER VOLTAGE VCE (V)
4
2017-01-06

No Preview Available !

2SA2184
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
5 2017-01-06