WLL170-2N360.pdf 데이터시트 (총 7 페이지) - 파일 다운로드 WLL170-2N360 데이타시트 다운로드

No Preview Available !

WLL170-2N360
WLL170-2
FIBER-OPTIC SENSORS AND FIBERS

No Preview Available !

A
B
C
D
E
F
H
I
J
K
L
M
N
O
P
Q
R
S
T
WLL170-2N360 | WLL170-2
FIBER-OPTIC SENSORS AND FIBERS
Ordering information
Type
WLL170-2N360
Included in delivery: BEF-WLL170 (1)
Other models and accessories www.sick.com/WLL170-2
Illustration may differ
Part no.
6029533
Detailed technical data
Features
Sensor/ detection principle
Dimensions (W x H x D)
Housing design (light emission)
Sensing range max.
Sensing range
Focus
Type of light
Light source
Angle of dispersion
Wave length
Adjustment
Time type
Delay time
Indication
Fiber-optic photoelectric sensor
10.5 mm x 35.5 mm x 83.7 mm
Rectangular
0 mm ... 1,600 mm, Through-beam system 1)
0 mm ... 65 mm, Proximity system 2) 3)
0 mm ... 350 mm, Through-beam system 4)
 5)
Visible red light
LED 6)
Approx. 65° 5)
660 nm
Potentiometer, 10 turns
Off delay
Selectable by sliding switch, 40 ms
LED
1) LL3-TB02 and tip adapter LL3-TA01.
2) Objects to be sensed with 90% reflectivity (based on DIN 5033 white standard). Sensing range depends on fiber-optic cable.
3) LL3-DB01.
4) LL3-TB01.
5) See LL3 fiber-optic data.
6) Average service life: 100,000 h at TU = +25 °C.
2 PHOTOELECTRIC SENSORS | SICK
Online data sheet | 2018-05-04 14:57:19
Subject to change without notice

No Preview Available !

WLL170-2N360 | WLL170-2
FIBER-OPTIC SENSORS AND FIBERS
Mechanics/electronics
Supply voltage
Ripple
Power consumption
Switching output
Number of switching outputs
Switching mode
Switching mode selector
Output current Imax.
Response time
Switching frequency
Input
Connection type
Circuit protection
Protection class
Weight
Housing material
Enclosure rating
Items supplied
Ambient operating temperature
Ambient storage temperature
UL File No.
10 V DC ... 30 V DC 1)
10 % 2)
≤ 30 mA 3)
NPN
1
Light/dark switching
Selectable via light/dark selector
≤ 100 mA
≤ 50 µs 4)
10,000 Hz 5)
-
Connector M8, 3-pin
6)
7)
8)
9)
III
70 g
Plastic, ABS/PC
IP66 10)
BEF-WLL170 mounting bracket
–25 °C ... +55 °C
–40 °C ... +70 °C
NRKH.E300503 & NRKH7.E300503
1) Limit values.
2) May not exceed or fall below Uv tolerances.
3) Without load.
4) Signal transit time with resistive load.
5) With light/dark ratio 1:1.
6) A = VS connections reverse-polarity protected.
7) B = inputs and output reverse-polarity protected.
8) C = interference suppression.
9) D = outputs overcurrent and short-circuit protected.
10) With correctly attached fibre-optic cable LL3 and closed protection hood.
Classifications
ECl@ss 5.0
ECl@ss 5.1.4
ECl@ss 6.0
ECl@ss 6.2
ECl@ss 7.0
ECl@ss 8.0
ECl@ss 8.1
27270905
27270905
27270905
27270905
27270905
27270905
27270905
2018-05-04 14:57:19 | Online data sheet
S ubject to change without notice
PHOTOELECTRIC SENSORS | SICK
3

No Preview Available !

A
B
C
D
E
F
H
I
J
K
L
M
N
O
P
Q
R
S
T
WLL170-2N360 | WLL170-2
FIBER-OPTIC SENSORS AND FIBERS
ECl@ss 9.0
ETIM 5.0
ETIM 6.0
UNSPSC 16.0901
27270905
EC002651
EC002651
39121528
Adjustments possible
WLL170-2
6
7
8
Min Max
SENS.
9
ß
OFF DLY
àL.ON
áOFF
D.ON
  Indicating pin correctly inserted LL3 fiber
  LED indicator orange, lights up when switching output is active
  LED signal strength indicator green, lights up, when light received< 0.9 or >1.1 (switching threshold = 1)
  Sensitivity scale 270°
  Sensitivity control ( 10 revolutions)
  OFF delay selector switch: “OFF DLY” (on)/“OFF” (off), 40 ms fixed
  Selector switch: "L.ON" ( light switching) /"D.ON" ( dark switching)
Connection diagram
cd-045
BN
1
+ (L+)
BU 3 - (M)
BK 4 Q
4 PHOTOELECTRIC SENSORS | SICK
Online data sheet | 2018-05-04 14:57:19
Subject to change without notice

No Preview Available !

Dimensional drawing (Dimensions in mm (inch))
WLL170-2
84,1
Ø 3,2
98
9,5
5 72,6
3
2
14
6,5
~ 180°
5
2,3
5
10,5
18,9
Ø 4,2
9 10 7
36,6
  Sender LED, installation of LL3 fibre-optic cable (sender fibre)
  Receiver, installation of LL3 fibre optic cable (receiver fibre)
  Protective hood, can be raised at both ends
  Mounting bracket, included with delivery
  Connection
WLL170-2N360 | WLL170-2
FIBER-OPTIC SENSORS AND FIBERS
Recommended accessories
Other models and accessories www.sick.com/WLL170-2
Brief description
Mounting brackets and plates
Mounting bracket, steel, zinc coated, without mounting hardware
Other mounting accessories
Rail end piece for block mounting, stainless steel, mounting hardware included
Cutter for fibers, supplied with LL3
Plug connectors and cables
Head A: female connector, M8, 3-pin, straight, A-coded
Head B: Flying leads
Cable: Sensor/actuator cable, PVC, unshielded, 2 m
Head A: female connector, M8, 3-pin, straight, A-coded
Head B: Flying leads
Cable: Sensor/actuator cable, PVC, unshielded, 5 m
Head A: female connector, M8, 3-pin, angled, A-coded
Head B: Flying leads
Cable: Sensor/actuator cable, PVC, unshielded, 2 m
Head A: female connector, M8, 3-pin, angled, A-coded
Head B: Flying leads
Cable: Sensor/actuator cable, PVC, unshielded, 5 m
Type
BEF-WLL170
Part no.
5306574
BEF-EB01-W190
5313011
FC 5304141
YF8U13-020VA1XLEAX 2095860
YF8U13-050VA1XLEAX 2095884
YG8U13-020VA1XLEAX 2096165
YG8U13-050VA1XLEAX 2096166
2018-05-04 14:57:19 | Online data sheet
S ubject to change without notice
PHOTOELECTRIC SENSORS | SICK
5