Q4010L4.pdf 데이터시트 (총 9 페이지) - 파일 다운로드 Q4010L4 데이타시트 다운로드

No Preview Available !

Teccor® brand Thyristors
10 Amp Standard & Alternistor (High Communitation) Triacs
Qxx10xx & Qxx10xHx Series
RoHS
Agency Approval
Agency
Agency File Number
L Package: E71639
Main Features
Symbol
IT(RMS)
VDRM/ VRRM
IGT (Q1)
Value
10
400 to 1000
25 to 50
Schematic Symbol
Unit
A
V
mA
MT2
MT1
Description
10 Amp bi-directional solid state switch series is designed
for AC switching and phase control applications such as
motor speed and temperature modulation controls, lighting
controls, and static switching relays.
Standard type devices normally operate in Quadrants I & III
triggered from AC line.
Features & Benefits
• RoHS Compliant
• Glass – passivated
junctions
• Voltage capability up to
1000 V
• Surge capability up to
120 A
• Electrically isolated
package “L - Package”
and UL Recognized for
2500Vrms
• Solid-state switching
eliminates arcing or
contact bounce that
create voltage transients
• No contacts to wear
out from reaction of
switching events
• Restricted (or limited) RFI
generation, depending on
activation point sine wave
Applications
Alternistor type devices are used in applications requiring
high commutation performance such as controlling
inductive loads. Isolated packages are offered with internal
construction, having the case or mounting tab electrically
isolated from the semiconductor chip.
Additional Information
G
Datasheet
Resources
Samples
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16

No Preview Available !

Teccor® brand Thyristors
10 Amp Standard & Alternistor (High Communitation) Triacs
Absolute Maximum Ratings — Standard Triac
Symbol
IT(RMS)
ITSM
I2t
di/dt
IGTM
PG(AV)
Tstg
TJ
Parameter
RMS on-state current (full sine wave)
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
I2t Value for fusing
Critical rate of rise of on-state current
IG = 200mA with 0.1μs rise time
Peak gate trigger current
Average gate power dissipation
Storage temperature range
Operating junction temperature range
Qxx10Ry/
Qxx10Ny
TC = 95°C
Qxx10Ly
f = 50 Hz
TC = 90°C
t = 20 ms
f = 60 Hz
t = 16.7 ms
tp = 8.3 ms
f = 120 Hz
TJ = 125°C
tIpGT
10 μs
IGTM
TJ = 125°C
TJ = 125°C
Value
10
100
120
60
70
1.8
0.5
-40 to 150
-40 to 125
Unit
A
A
A2s
A/μs
A
W
°C
°C
Absolute Maximum Ratings — Alternistor Triac (3 Quadrants)
Symbol
IT(RMS)
ITSM
I2t
di/dt
IGTM
PG(AV)
Tstg
TJ
Parameter
RMS on-state current (full sine wave)
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
I2t Value for fusing
Critical rate of rise of on-state current
Peak gate trigger current
Average gate power dissipation
Storage temperature range
Operating junction temperature range
Qxx10LHy
Qxx10RHy/
Qxx10NHy
TC = 90°C
TC = 95°C
f = 50 Hz
t = 20 ms
f = 60 Hz
t = 16.7 ms
tp = 8.3 ms
f = 120 Hz
TJ = 125°C
tIpGT
10 μs
IGTM
TJ = 125°C
TJ = 125°C
Value
10
110
120
60
70
2.0
0.5
-40 to 150
-40 to 125
Unit
A
A
A2s
A/μs
A
W
°C
°C
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Standard Triac
Symbol
IGT
VGT
VGD
IH
Test Conditions
VD = 12V RL = 60 Ω
VD = 12V RL = 60 Ω
VD = VDRM RL = 3.3 kΩ TJ = 125°C
IT = 200mA
dv/dt
VD = VDRM Gate Open TJ = 125°C
(dv/dt)c
VD = VDRM Gate Open TJ = 100°C
(di/dt)c = 5.4 A/ms TJ = 125°C
tgt IG = 2 x IGT PW = 15µs IT = 14.1 A(pk)
Note: xx = voltage, x = package, y = sensitivity
Quadrant
I – II – III
IV
MAX.
I – II – III
MAX.
ALL MIN.
MAX.
400V
600V
800V
MIN.
1000V
TYP.
TYP.
Qxx10x4
Qxx10x5
25 50
50 75 (TYP)
1.3
0.2
35 50
150 225
100 200
75 175
50 150
24
3.0 3.0
Unit
mA
V
V
mA
V/μs
V/μs
μs
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16

No Preview Available !

Teccor® brand Thyristors
10 Amp Standard & Alternistor (High Communitation) Triacs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Alternistor Triac (3 Quadrants)
Symbol
Test Conditions
Quadrant
Value
IGT VD = 12V RL = 60 Ω
VGT VD = 12V RL = 60 Ω
VGD VD = VDRM RL = 3.3 kΩ TJ = 125°C
IH IT = 100mA
dv/dt
(dv/dt)c
tgt
VD = VDRM Gate Open TJ = 125°C
VD = VDRM Gate Open TJ = 100°C
(di/dt)c = 5.4 A/ms TJ = 125°C
IG = 2 x IGT PW = 15µs IT = 14.1 A(pk)
I – II – III
I – II – III
I – II – III
400V
600V
800V
1000V
MAX.
MAX.
MIN.
MAX.
MIN.
TYP.
TYP.
50
1.3
0.2
50
750
650
500
300
30
4.0
Static Characteristics
Symbol
VTM
IIDRRRMM
VDRM = VRRM
Test Conditions
ITM = 14.1A tp = 380 µs
TJ = 25°C
TJ = 125°C
TJ = 100°C
400 - 600V
400 - 800V
1000V
MAX.
MAX.
Thermal Resistances
Symbol
Rθ(J-C)
Parameter
Junction to case (AC)
Rθ(J-A)
Junction to ambient (AC)
Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity
Qxx10Ryy/
Qxx10Nyy
Qxx10Lyy
Qxx10Ryy
Qxx10Lyy
Value
1.60
10
2
3
Value
1.3
2.6
45
50
Unit
mA
V
V
mA
V/μs
V/μs
μs
Unit
V
μA
mA
Unit
°C/W
°C/W
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16

No Preview Available !

Teccor® brand Thyristors
10 Amp Standard & Alternistor (High Communitation) Triacs
Figure 1: D efinition of Quadrants
ALL POLARITIES ARE REFERENCED TO MT1
MT2 POSITIVE
MT2 (Positive +Half Cycle)
MT2
(-) IGT
GATE
-IGT
MT1
REF
MT2
(+) IGT
GATE
MT1
QII QI
QIII QIV
REF
MT2
+ IGT
(-) IGT
GATE
(+) IGT
GATE
-MT1
REF MT2 NEGATIVE
(Negative Half Cycle)
MT1
REF
Note: Alternistors will not operate in QIV
Figure 3: N ormalized DC Holding Current
vs. Junction Temperature
4.0
3.0
2.0
1.0
0.0
-65 -40 -15 10 35 60 85 110 +125
Junction Temperature (TJ) - ºC
Figure 5: P ower Dissipation (Typical)
vs. RMS On-State Current
12
10
8
6
4
2
0
0
CURRENT WAVEFORM: Sinusoidal
LCOOANDD:URCeTsIOisNtivAeNoGr LInEd: u3c6ti0veo
24
6 8 10
RMS On-State Current [IT(RMS)] - AMPS
12
Figure 2: N ormalized DC Gate Trigger Current for
All Quadrants vs. Junction Temperature
4.0
3.0
2.0
1.0
0.0
-65
-40
-15 10 35 60
Junction Temperature (TJ) - ºC
85
110 +125
Figure 4: N ormalized DC Gate Trigger Voltage for
All Quadrants vs. Junction Temperature
2.0
1.5
1.0
0.5
0.0
-65 -40 -15 10 35 60 85 110 +125
Junction Temperature (TJ) - ºC
Figure 6: M aximum Allowable Case Temperature
vs. On-State Current
130
120
110
100
90
80
70
60
0
Qxx10Ryy
Qxx10Nyy
Qxx10Lyy
2 4 6 8 10
RMS On-State Current [IT(RMS)] - AMPS
12
14
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16

No Preview Available !

Teccor® brand Thyristors
10 Amp Standard & Alternistor (High Communitation) Triacs
Figure 7: Maximum Allowable Ambient Temperature
vs. On-State Current
120
110
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive CONDUCTION
100
ANGLE: 360º
FREE AIR RATING - NO HEATSINK
90
80 Qxx10LHy
70 Qxx10RHy
60 Qxx10Ly
Qxx10Ry
50
40
30
20
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
RMS On-State Current [IT(RMS)] - AMPS
Figure 8: O n-State Current vs. On-State Voltage
(Typical)
20
18
16
14
12
10
8
6
4
2
0
0.7
TC = 25 ºC
0.8 0.9 1.0 1.1 1.2 1.3
Positive or Negative Instantaneous On-State Voltage
(VT) - Volts
1.4
Figure 9: S urge Peak On-State Current vs. Number of Cycles
1000
100
10
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. G ate control may be lost during and immediately
following surge current interval.
2. O verload may not be repeated until junction
temperature has returned to steady-state
rated value.
1
1 10 100
Surge Current Duration - Full Cycles
1000
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/30/16