SB820FCT.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 SB820FCT 데이타시트 다운로드

No Preview Available !

ऍໜႝηԖज़Ϧљ
MAYLOON ELECTRONIC CO., LTD.,
SINLOON®
ߕ௽ഗԲᄕጥ
Case: ITO-220
SB820FCT - SB8100FCT
10A Dual Schottky Barrier Rectifier
ϭ Feature
Ϭ Schottky Barrier Chip
Ϭ Guard Ring for Transient Protection
Ϭ Low Forward Voltage Drop
Ϭ Low Reverse Leakage Current
Ϭ High Surge Current Capability
Ϭ Plastic Material has UL Flammability Classification 94V-0
Figure
ϭ Mechanical Data
ϭ Electrical Symbol
Ϭ Case: ITO-220, Full Moldes Plastic
Ϭ Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Pin 1
Ϭ Polarity: See Diagram
Ϭ Weight: 2.24 grams (approx)
Pin 3
Ϭ Mounting Position: Any
Ϭ Mounting Torque: 11.5 cm-kg (10 in-lbs) max.
Ϭ Lead Free: For RoHS / Lead Free Version Add “-LF” Suffix to part Number.
Case Pin 2
ϭ Dimension
Case: ITO-220
Dim.
Min.
A 14.6
B 9.7
C 2.55
D 2.7
E 13.0
F 0.5
G (ĭ)
3.0
H 6.3
I 4.2
J 2.5
K 0.5
L 2.7
P 2.29
(mm)
Max.
15.4
10.3
2.85
3.3
13.8
0.75
3.5
6.9
4.8
2.9
0.75
3.15
2.79
ϭ Marking Information
SB8xxFCT = Device Number
xx = See Page 2
Polarity = As Marked Body
Ref No.WT2006MLN1111
www.mayloon.com.hk
8.0A Dual Schottky Barrier Rectifier ITO-220
SB820FCT-SB8100FCT (20V ~ 100V)
Page: P4- P1

No Preview Available !

ऍໜႝηԖज़Ϧљ
MAYLOON ELECTRONIC CO., LTD.,
SINLOON®
ߕ௽ഗԲᄕጥ
Case: ITO-220
SB820FCT - SB8100FCT
10A Dual Schottky Barrier Rectifier
ϭ Maximum Ratings and Electrical Characteristics @TA=25к unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20%.
Characteristics
Symbol SB SB SB SB SB SB SB
SB Unit
820FCT830FCT840FCT845FCT850FCT860FCT880FCT8100FCT
Peak Repetitive Reverse Voltage
VRRM
Working Peak Reverse Voltage
DC Blocking Voltage
VRWM
20
30
40
45
50
60
80
100
V
VR
RMS Reverse Voltage
Average Rectified Output Current
Non-Repetitive Peak Forward Surge
VR(RMS) 14 21 28 32 35 42 56
70
IO 8.0
8.0 8.0
V
A
Current 8.3ms Single half sine-wave
IFSM
150
150 150 A
superimposed on rated load (JEDEC
Forward Voltage @IF=4.0A
Peak Reverse Current @TA = 25к
At Rated DC Blocking Vol. @TA=100к
Typical Junction Capacitance (Note 1)
VFM
IRM
Cj
0.55
0.75
0.5
50
700
0.85 V
mA
pF
Operating and Storage Temperature Range Tj,TSTG
-65 to +150
к
Note 1: Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
Tc, CASE TEMPERATURE (к)
Fig-1 Forward and Current Derating Curve
VF, INSTANTANEOUS FORWARD VOLTAGE(V)
Fig-2 Typical Forward Voltage Characteristics
NUMBER OF CYCLES AT 60 Hz
Fig-3 Max. Non-Repetitive Paek Forward Surge Current
VR, REVERSE VOLTAGE (V)
Fig-4 Typical Junction Capacitance
Ref No.WT2006MLN1111
www.mayloon.com.hk
8.0A Dual Schottky Barrier Rectifier ITO-220
SB820FCT-SB8100FCT (20V ~ 100V)
Page: P4- P2

No Preview Available !

ऍໜႝηԖज़Ϧљ
MAYLOON ELECTRONIC CO., LTD.,
SINLOON®
ߕ௽ഗԲᄕጥ
Case: ITO-220
ϭ Packaging Information
Tube Size
Quantity
LxWxH (mm)
(Pcs)
525 x 31 x6
50
Inner Box Size
LxWxH (mm)
555x145x95
Anti-static tube:
SB820FCT - SB8100FCT
10A Dual Schottky Barrier Rectifier
Quantity
(Pcs)
2000
Carton Size
LxWxH (mm)
572x306x218
Quantity Gross
(Pcs) Weight
8000 19.0kg
Inner Box :
Carton Package:
Label
Ref No.WT2006MLN1111
www.mayloon.com.hk
8.0A Dual Schottky Barrier Rectifier ITO-220
SB820FCT-SB8100FCT (20V ~ 100V)
Page: P4- P3

No Preview Available !

ऍໜႝηԖज़Ϧљ
MAYLOON ELECTRONIC CO., LTD.,
SINLOON®
ߕ௽ഗԲᄕጥ
Case: ITO-220
SB820FCT - SB8100FCT
8A Dual Schottky Barrier Rectifier
ϭ Package Mounting Guide
It is important that the packages are correctly mounted if full functionality is to be achieved. Mounting of the package to
a heat sink must be done such that there is sufficient pressure from the mounting screws to insure good contact
with the heat sink for efficient heat flow. Incorrect mounting may lead to both thermal and mechanical problems.
Over tightening the mounting screws will cause the package to warp reducing the contact area with the heat sink
and increasing the thermal resistance from the package case to the heat sink, resulting in higher operating die
temperatures. Extreme over tightening of the mounting screws beyond the recommended torque force will cause
severe physical stress resulting in cracked die and catastrophic IC failure. Though the reliability of the package is
excellent, the use of inappropriate techniques or unsuitable tools during the mounting process can affect the long
term reliability of the device and even damage it.
ϭ Recommended Screw Mount Arrangement
(1) 6-32 HEX Head Screw
(2) Plain Washer
(3) Rectifier
(4) Heatsink
(5) Conical Washer
(6) 6-32 HEX Nut
Ϭ The full molded plastic package affords a major reduction of hardware as compared to a standard
TO-220 package. However, precaution should be made in mounting procedure.
Ϭ A conical washer should be used to apply proper force to the device. Screw should not be tightened with
any type of air-forced toque or equipment that may cause crack on device package.
Ϭ A layer of thermal grease or thermal pad in the interface will be considerably helpful for heat dissipation.
ϡભၼֆ׹ข঴๵௑֗ࠡ௽ࢤ೶ᑇऱޏ᧢ࢨޓᄅஏլ׼۩ຏवΖ
ϡMayloon characteristic parameters of electronic product specification changes or updates without notice to improveΖ
Ref No.WT2006MLN1111
www.mayloon.com.hk
8.0A Dual Schottky Barrier Rectifier ITO-220
SB820FCT-SB8100FCT (20V ~ 100V)
Page: P4- P4