TP1802.pdf 데이터시트 (총 1 페이지) - 파일 다운로드 TP1802 데이타시트 다운로드

No Preview Available !

PVC Switch Boxes
Applications:
Cooper Crouse-Hinds nonmetallic switch and outlet boxes are used:
• In branch circuit wiring as a splice point
• To mount wiring devices such as switches and receptacles
• To provide mechanical protection for wiring systems and
electrical devices
Features:
• Available for use with wood or metal studs to meet any
construction preference
• Quick entry feature on all nonmetallic boxes offers labor
savings – no need to break out knockouts – simply push the
nonmetallic cable into the box. No tools are required. No
need to remove knockouts.
• Unique configuration of this quick entry feature on single gang
boxes provides a self-feeding feature that eliminates the need to
reach inside the box to pull the wire out.
• Integral labor saving clamping feature on two, three & four gang
boxes. The multiple gang box unique entry also serves as a
clamp, eliminating the need to mechanically secure the cable
inside the box. There are no separate clamps or screws to install
or tighten. Each entry into the multiple gang boxes has the quick
entry feature allowing the installer to simply push the cable into the
box without the need for tools or removal of knock-outs, so the
cable can be inserted where it is required.
Certifications and Compliances:
• UL Listed File No. E102328
• Classified for use in fire rated (2 HR) wall or ceiling.
Fire Rating No. R9933.
Standard Materials:
• PVC-Polyvinyl Chloride compound
SWITCH BOXES – ANGLED NAILS
UL LISTED
TP1600
TP1800
Cat. #
TP1600
TP1800
TP1802
TP2000
TP2002
TP2300
TP2302
Bracket
or Nails
Nails
Nails
Speed-Mount & Nails
Nails
Speed-Mount & Nails
Nails
Speed-Mount & Nails
Capacity
Cu. In.
16.0
18.0
18.0
20.3
20.3
22.5
22.5
SWITCH BOXES – INTEGRAL CLAMPS
UL LISTED
TP2000
H
33/4"
33/4"
311/16"
33/4"
311/16"
33/4"
311/16"
W
21/4"
21/4"
21/4"
21/4"
21/4"
21/4"
21/4"
D
21/2"
23/4"
23/4"
33/16"
31/8"
37/16"
37/16"
Unit Qty.
100
100
100
100
100
50
50
TP2300
Wt. Lbs.
Per 100
21
23
20
25
21
27
23
Cat. #
TP1832
TP1690
TP2020
TP2030
TP2332
194
TP1690
(Old Work)
Bracket
or Nails
Speed-Mount & Bracket
Swing Clips & Integral Clamps
Side Bracket (5/8" offset)
Face Bracket (1/2" offset)
Speed-Mount & Bracket
TP2020
(For Wood or Metal Studs)
Capacity
Cu. In.
18.0
16.0
20.3
20.3
22.5
H
311/16"
35/8"
311/16"
311/16"
311/16"
W
21/4"
25/16"
21/4"
21/4"
21/4"
TP2030
(For Wood or Metal Studs)
D
23/4"
23/4"
33/16"
33/16"
37/16"
Unit Qty.
100
50
50
50
50
Wt. Lbs.
Per 100
18
20
24
24
23
www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2012 Cooper Crouse-Hinds