CR0201-20W.pdf 데이터시트 (총 6 페이지) - 파일 다운로드 CR0201-20W 데이타시트 다운로드

No Preview Available !

Chip Resistors – CR, LCR and ULCR
Features
Flat Chip Resistors for surface mount applications
LCR and ULCR for current sensing applications
Dimensions
L
C CC
w
C
T
L (Length) Inches
(mm)
W (Width) Inches
(mm)
T (Thickness) Inches
(mm)
C (End Band) Inches
(mm)
01005
0.016 ± .0008
(0.4 ± 0.02)
0.008 ± .0008
(0.2 ± 0.02)
0.005 ± .0008
(0.13 ± 0.02)
0.003 ± .001
(0.08 ± 0.03)
0201
0.024 ± .002
(0.6 ± 0.05)
0.012 ± .001
(0.3 ± 0.02)
0.010 ± .002
(0.25 ± 0.05)
0.006 ± .002
(0.15 ± 0.05)
CR Series
32
0402
0.040 ± .002
(1.0 ± 0.05)
0.020 ± .001
(0.5 ± 0.02)
0.014 ± .002
(0.35 ± .05)
0.008 ± .004
(0.2 ± 0.1)
0603
0.063 ± .004
(1.6 ± 0.1)
0.031 ± .004
(0.8 ± 0.1)
0.018 ± .004
(0.45 ± 0.1)
0.012 ± .006
(0.30 ± 0.15)
0805
0.079 ± .006
(2.0 ± 0.15)
0.050 ± .006
(1.25 ± 0.15)
0.018 ± .006
(0.45 ± 0.15)
0.014 ± .006
(0.35 ± 0.15)
1206
0.126 ± .006
(3.2 ± 0.15)
0.063 ± .006
(1.6 ± 0.15)
0.022 ± .006
(0.56 ± 0.15)
0.020 ± .008
(0.50 ± 0.20)
Structure
LCR Series
1210
0.126 ± .006
(3.2 ± 0.15)
0.098 ± .006
(2.50 ± 0.15)
0.022 ± .006
(0.56 ± 0.15)
0.020 ± .008
(0.50 ± 0.20)
2010
2512*
0.197 ± .006
(5.0 ± 0.15)
0.248 ± .006
(6.3 ± 0.15)
0.098 ± .006
(2.50 ± 0.15)
0.126 ± .006
(3.2 ± 0.15)
0.022 ± .006
(0.56 ± 0.15)
0.022 ± .006
(0.56 ± 0.15)
0.024 ± .008
(0.60 ± 0.20)
0.024 ± .008
(0.60 ± 0.20)
* ULCR. See page 43
32
4
5
6
1 Substrate
2 Resistive element
3 Protective coating
4 Inner termination
5 Inner Plating
6 Outer Plating
1
Description
Alumina
Ruthenium Oxide (RuO2)
Boro-Silicate Glass
Silver Palladium (Ag-Pd)
Nickel (Ni)
Solder Plating,
100% matte Tin (Sn)
4
5
6
71
1 Substrate
2 Resistive element
3 Protective coating
4 Inner termination
5 1st Plating
6 2nd Plating
7 3rd Plating
Description
Alumina
Silver Palladium (Ag-Pd)
Boro-Silicate Glass
Silver Palladium (Ag-Pd)
Copper (Cu)
Nickel (Ni)
Solder Plating,
100% matte Tin (Sn)
All components in this section are RoHS compliant per the EU directives and definitions.
For standard resistance values, please see “EIA Standard Resistance Values” on page 62.
5900 Shepherd Mountain Cove  •  Austin, TX 78730
Phone: 512 / 794-0081 •  Fax: 512 / 794-0087  •  Toll Free: 800 / 950-8365
e-mail: sales@venkel.com  •  www.venkel.com
40

No Preview Available !

CR – Standard Chip Resistors
Specifications
Series
Power Rating
at 70°C
Max. Working Voltage
CR01005-32W
0.03W
PR or 15V whichever is less
CR0201-20W
0.050W
PR or 25V whichever is less
CR0402-16W
0.063W
PR or 50V whichever is less
T.C.R.
Temperature Coefficient of
Resistance (PPM/˚C)
+600 ~ -200 for (4.7- 9.1);
±250 for (10- 1Meg)
±200 for F and J Tolerance
(10- 1Meg)
*SEE NOTE
Zero (ohm)
Current Rating
0.5A
0.5A
1A
Resistance Range
Zero, 10- 1Meg
Only available in 5% tolerance
Zero, 1- 10Meg
E-12 (1.2Meg - 10Meg )
Zero, 1- 10Meg
CR0603-16W
0.063W
PR or 50V whichever is less
*SEE NOTE
1A Zero, 1- 22Meg
CR0603-10W
0.10W
PR or 50V whichever is less
*SEE NOTE
1A Zero, 1- 22Meg
CR0805-10W
0.10W
PR or 150V whichever is less
*SEE NOTE
2A Zero, 1- 22Meg
CR0805-8W
0.125W
PR or 150V whichever is less
*SEE NOTE
2A Zero, 1- 22Meg
CR1206-8W
0.125W
PR or 200V whichever is less
*SEE NOTE
2A Zero, 1- 22Meg
CR1206-4W
0.25W
PR or 200V whichever is less
*SEE NOTE
2A Zero, 1- 22Meg
CR1210-4W
0.25W
PR or 200V whichever is less
*SEE NOTE
4A Zero, 1- 10Meg
CR1210-2W
0.50W
PR or 200V whichever is less
*SEE NOTE
4A Zero, 1- 10Meg
CR2010-2W
0.50W
PR or 200V whichever is less
*SEE NOTE
5A Zero, 1- 10Meg
CR2010-1W
1.00W
PR or 200V whichever is less
*SEE NOTE
5A Zero, 1- 10Meg
CR2512-1W
1.00W
PR or 200V whichever is less
*SEE NOTE
5A Zero, 1- 10Meg
CR2512-2W
2.00W
PR or 200V whichever is less
*SEE NOTE
5A Zero, 1- 10Meg
*NOTE: G and J Tol.: ±200 (1- 10Meg); F and D Tol.: ±100 (10- 1Meg); ±200 (1- 9.76) & (1.02Meg- 9.76MegΩ); D, F, G & J Tol.: ±350 (over 10Meg)
T.C.R. is ±350 for values outside referenced range.
Operating Temp. Range is -55°C to +125°C • DC Resistance Value of zero ohm is 50m ohms max.
5900 Shepherd Mountain Cove  •  Austin, TX 78730
Phone: 512 / 794-0081 •  Fax: 512 / 794-0087  •  Toll Free: 800 / 950-8365
e-mail: sales@venkel.com  •  www.venkel.com
41

No Preview Available !

Chip Resistors
LCR – Low Value Chip Resistors
Specifications
Series
LCR0402
LCR0603
LCR0805
LCR1206
LCR1210
LCR2010
LCR2512
Power
Rating
At 70˚C (W)
0.125
0.125
0.25
0.50
0.66
0.75
2.00
Rated
Current
Range (A)
0.36 – 1.58
0.36 – 2.5
0.50 – 3.53
0.71 – 7.07
0.85 – 3.63
0.87 – 8.66
1.01 – 10.0
Resistance
Range (m)
50 – 976
20 – 976
20 – 976
10 – 976
50 – 900
10 – 976
10 – 976
Specific
Resistance
Range
(SRR) (m)
50 – 100
102 – 500
511 – 976
20 – 50
51 – 100
102 – 500
511 – 976
20 – 50
51 – 100
102 – 500
511 – 976
10 – 20
21 – 50
51 – 500
511 – 976
50 – 470
500 – 900
10 – 20
21 – 50
51 – 500
511 – 976
10 – 20
21 – 50
51 – 500
511 – 976
Tolerance
Available
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
F, G, J
Temperature
Coefficient of
Resistance (PPM)
(10-6/˚C)
±300
±200
±100
±450
±300
±200
±100
±450
±300
±200
±100
±450
±300
±200
±100
±200
±100
±450
±300
±200
±100
±450
±300
±200
±100
Dielectric
Withstanding
Voltage (DWV)
(V)
100
100
500
500
500
500
500
Note: Other nominal resistance values may also be available, please contact VENKEL LTD. for further information.
Standard resistance values and corresponding codes:
Operating
Temperature
Range (˚C)
–55 ~ +125
–55 ~ +125
–55 ~ +125
–55 ~ +125
–55 ~ +125
–55 ~ +125
–55 ~ +125
Resistance
10m ohm
12m ohm
15m ohm
18m ohm
20m ohm
22m ohm
25m ohm
P/N
Code
R010
R012
R015
R018
R020
R022
R025
Resistance
27m ohm
30m ohm
33m ohm
35m ohm
40m ohm
43m ohm
47m ohm
P/N
Code
R027
R030
R033
R035
R040
R043
R047
Resistance
50m ohm
56m ohm
60m ohm
65m ohm
68m ohm
70m ohm
75m ohm
P/N
Code
R050
R056
R060
R065
R068
R070
R075
Resistance
80m ohm
90m ohm
100m ohm
110m ohm
120m ohm
130m ohm
150m ohm
P/N
Code
R080
R090
R100
R110
R120
R130
R150
Resistance
160m ohm
180m ohm
200m ohm
220m ohm
250m ohm
270m ohm
300m ohm
P/N
Code
R160
R180
R200
R220
R250
R270
R300
Resistance
330m ohm
360m ohm
400m ohm
430m ohm
470m ohm
500m ohm
560m ohm
P/N
Code
R330
R360
R400
R430
R470
R500
R560
Resistance
600m ohm
650m ohm
680m ohm
700m ohm
750m ohm
800m ohm
900m ohm
P/N
Code
R600
R650
R680
R700
R750
R800
R900
Marking for LCR:
The resistance code shall be marked on the resistor as follows (this code is the same for 1% and 5% tolerances):
0402 size:
no markings
0603 size:
3-digit markings using “R” and 2 digits. When “R” can not be used then 3 digits and underlined. (see below)
0805 – 2512 size: 4-digit markings using “R” and 3 digits. “Rxxx.” R010 = 10m ohm, R120 = 120m ohm.
Examples of 3-digit markings:
R01 = 10m ohm 022 = 22m ohm 068 = 68m ohm R08 = 80m ohm R10 = 100m ohm
All components in this section are RoHS compliant per the EU directives and definitions.
5900 Shepherd Mountain Cove  •  Austin, TX 78730
Phone: 512 / 794-0081 •  Fax: 512 / 794-0087  •  Toll Free: 800 / 950-8365
e-mail: sales@venkel.com  •  www.venkel.com
42

No Preview Available !

ULCR – Ultra Low Value Chip Resistors
Dimensions
C
L
T
w
Specifications
Size
Resistance
(m)
Power
Rating
At 70˚C (W)
2512
2512
2512
2512
2512
2512
2512
2512
2512
2512
2512
2512
2512
2512
2512
0.50
0.75
1.00
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
6.00
6.50
7.00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Tolerance
Available
J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
Temperature
Coefficient of
Resistance
(PPM) (10-6/˚C)
±50
±50
±50
±50
±50
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
Maximum
Rated
Current (A)
44.7
36.5
31.6
25.8
22.4
20.0
18.3
16.9
15.8
14.9
14.1
13.4
12.9
12.4
12.0
100% Matte Tin (Sn)
Copper Plating (Cu)
Marking
Alloy Plate (MnCu)
Polymer Protective Coating
Unit: (mm)
Dimensions
L
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
W
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
T
1.40 ±0.20
1.00 ±0.20
0.80 ±0.20
0.65 ±0.20
0.50 ±0.20
1.00 ±0.20
0.70 ±0.20
0.71 ±0.20
0.60 ±0.20
0.58 ±0.20
0.50 ±0.20
0.47 ±0.20
0.50 ±0.20
0.47 ±0.20
0.45 ±0.20
C
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
Standard resistance values and corresponding codes:
Resistance
(m)
0.50
P/N Code
M500
Marking Code
M50
Resistance
(m)
4.00
0.75
M750
M75
4.50
1.00
1M00
R001
5.00
1.50
1M50
1M5
5.50
2.00
2M00
R002
6.00
2.50
2M50
2M5
6.50
3.00
3M00
R003
7.00
3.50
3M50
3M5
P/N Code
4M00
4M50
5M00
5M50
6M00
6M50
7M00
Marking Code
R004
4M5
R005
5M5
R006
6M5
R007
Note: Other nominal resistance values may also be available, please contact VENKEL LTD. for further information.
All components in this section are RoHS compliant per the EU directives and definitions.
5900 Shepherd Mountain Cove  •  Austin, TX 78730
Phone: 512 / 794-0081 •  Fax: 512 / 794-0087  •  Toll Free: 800 / 950-8365
e-mail: sales@venkel.com  •  www.venkel.com
43

No Preview Available !

Characteristics
Item
Test Basis: JIS-C-5202
Specification Requirements
Typical
Short-time Overload
2.5 x rated voltage DC for 5 sec.
±1% +0.5W, no arc evidence
within ±0.4%
Load Life
70°C, rated voltage for 1.5 hrs. <1 meg. ±3% +0.1W, > 1 meg. ±5%
on/0.5 hr. for 1000 hrs.
Dielectric Withstanding Voltage
500V for 1 minute
No insulation breakdown
above 900-950V
Resistance to Soldering Heat
270°C for 10 seconds
±1% +0.05W, no mechanical damage
Temperature Cycling
EIA STD. 575, Para. 3.5
-55 ~ +125° C, 5 cycles.
± 1.0%
Solderability
230°C, 3 seconds, flux applied
95% minimum coverage
more than 97-98%
Curing Heat Resistance
+150°C for 10 minutes
±1% +0.05W
within ±0.3%
Dry Heat Resistance
-125°C for 1,000 hours
±3% +0.1W, no mechanical damage within ±0.5%
Pull Terminal Strength
500G load for 30 seconds ±1% +0.05W, no mechanical damage within ±0.2%
PCB Terminal Strength
1/45mm bend for 10 seconds ±1% +0.05W, no mechanical damage within ±0.2%
Moisture Resistance,
-55°C to +125°C, 5 cycles ±1% +0.05W, no mechanical damage
Thermal Shock
within ±0.2%
Moisture Load Life
40°C, 95% R.H., 1.5 hr. on, <1 meg ±3% +0.1W, > 1 meg. ±5%
0.5 hr. off, 1,000 hours
Insulation Resistance
500V, 1 minute
1,000 meg. minimum
more than 10 Meg.
Voltage Coefficient
Rated voltage and
+0/-100ppm/v: above 1K ±
1/10 times rated voltage
within - 90ppm/V
Low Temperature Exposure
-55°C for 1,000 hours
±3% +0.1W, no mechanical damage within ±0.5%
T .C.R.
TR eemsipsetarantcuere( pCpomef/f°icCie) nt
of
(For CR Series only)
0402 – 2512 case sizes: G & J Tol.: ±200 (1W – 10 Meg. W);
F & D Tol.: ±100 (10W – 1 Meg. W); ±200 (1W – 9.76W) & (1.02 Meg. W – 9.76 Meg. W)
D, F, G & J Tol.: ±350 (over 10 Meg. W)
0201 case size: ±200 for F and J Tol. (10W – 1 Meg. W);
TCR is ±350 for values outside referenced range
01005 case size: +600 ~ -200 for (4.7W – 9.1W); ±250 for (10W – 1 Meg. W)
5900 Shepherd Mountain Cove  •  Austin, TX 78730
Phone: 512 / 794-0081 •  Fax: 512 / 794-0087  •  Toll Free: 800 / 950-8365
e-mail: sales@venkel.com  •  www.venkel.com
44