K1200G.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 K1200G 데이타시트 다운로드

No Preview Available !

JIEJIE MICROELECTRONICS CO. , Ltd
K0900G Series Sidac
Rev.1.0
DESCRIPTION:
The sidac is a silicon bilateral voltage triggered switch with greater power-handling
capabilities than standard diacs. Upon application of a voltage exceeding the sidac
breakover voltage point, the sidac switches on through a negative resistance region
to a low on-state voltage. Conduction continues until the current is interrupted or
drops below the minimum holding current of the device.
APPLICATIONS:
High-voltage lamp ignitors
Natural gas ignitors
Gas oil ignitors
High-voltage power supplies
Xenon ignitors
Overvoltage protector
Pulse generators
Fluorescent lighting ignitorsHID lighting ignitors
1
Symbol
2
FEATURES:
Excellent capability of absorbing transient surge
Quick response to surge voltage (ns Level)
Glass-passivated junctions
High voltage lcmp ignitors
ABSOLUTE MAXIMUM RATINGS (TA=25ºC, RH=45%-75%, unless otherwise noted)
Parameter
Symbol
Storage temperature range
Tstg
Operating junction temperature range
Tj
On-state RMS Current
Maximum surge on-state current
non-repetitive one cycle peak value50Hz
Critical rate-of-rise of on-state current
IT
ITSM
diT/dt
Value
-40 to +125
-40 to +125
1
16.7
80
Unit
A
A
A
TEL:+86-513-83639777
- 1 / 4-
http://www.jjwdz.com

No Preview Available !

K0900G Series
JieJie Microelectronics CO. , Ltd
ELECTRICAL CHARACTERISTICS (TA=25)
Symbol
Parameter
VDRM Peak off-state voltage
IDRM Off-state current
VS Switching voltage
IS Switching current
RS Switching resistance
VT On-state voltage
IH Holding current
VBO Breakover Voltage
IBO Breakover current
V-I Curve
ELECTRICAL CHARACTERISTICS (TA=25, continued)
Part
Number
IDRM@VDRM
μA V
max min
VBO
V
min max
IBO VT@ IT=1A IH
uA V mA
max max min
K0900G 1 70 80 97 50 2 10
K1050G 1 90 95 113 50 2 10
K1200G 1 100 110 125 50 2 10
K1300G 1 110 120 138 50 2 10
K1400G 1 120 130 146 50 2 10
K1500G 1 130 140 170 50 2 10
K1800G 1 160 170 195 50 2 10
K2000G 1 180 190 215 50 2 10
K2200G 1 190 205 230 50 2 10
K2400G 1 200 220 250 50 2 10
K2600G 1 220 240 270 50 2 10
RS
kMarking
min
0.1 DB090
0.1 DB105
0.1 DB120
0.1 DB130
0.1 DB140
0.1 DB150
0.1 DB180
0.1 DB200BW
0.1 DB220BW
0.1 DB240BW
0.1 DB260BW
TEL:+86-513-83639777
- 2 / 4-
http://www.jjwdz.com

No Preview Available !

K0900G Series
ORDERING INFORMATION
JieJie Microelectronics CO. , Ltd
SOLDERING PARAMETERS
Reflow Condition
Pre Heat
-Temperature Min (Ts(min))
-Temperature Max(Ts(max))
-Time (Min to Max) (ts)
Average ramp up rate (Liquid us Temp (TL) to peak)
Ts(max) to TL - Ramp-up Rate
Reflow
-Temperature(TL) (Liquid us)
-Temperature(tL)
Peak Temp (Tp)
Time within 5of actual Peak Temp (tp)
Ramp-down Rate
Time 25to Peak Temp (TP)
Do not exceed
Pb-Free assembly
(see FIG.2)
+150
+200
60-180 secs.
3/sec. Max
3/sec. Max
+217
60-150 secs.
+260(+0/-5)
8-15 secs.
6/sec. Max
8 min. Max
+260
FIG.1: Maximum allowable ambient temperature
FIG.2: Reflow condition
versus on-state current
TA()
140
120
100
Current waveform: sinusoidal-50Hz
Load: resistive or inductive
Free air rating
TP
TL
Ramp-up
tp
Critical Zone
TL to TP
tL
80
60
DO-214AC(SMA)
TS(max)
Preheat
Ramp-down
TS(min)
40 ts
25
200 0.2 0.4 0.6 0.8 1.0 1.2 1.4
IT(A)
25 time to peak temperatue
(t 25to peak)
Time
TEL:+86-513-83639777
- 3 / 4-
http://www.jjwdz.com

No Preview Available !

K0900G Series
FIG.3: Normalized Vs change vs. junction
temperature
Percent of Vs change(%)
12
8
4
25
0
-4
-8 Tj()
-40 -20 0 20 40 60 80 100 120 140 160
JieJie Microelectronics CO. , Ltd
FIG.4: Normalized DC holding current vs. case
temperature
IH(Tj)/IH(Tj=25)
2.0
1.8
1.6
1.4
1.2 25
1.0
0.8
0.6
0.4 TC ()
-40 -20 0 20 40 60 80 100 120 140 160
PACKAGE MECHANICAL DATA
ABA
Dimensions
Ref. Inches
Millimeters
Min. Max. Min. Max.
A 1.000
- 25.40
-
B 0.228 0.300 5.80 7.62
C 0.027 0.035 0.69 0.89
D 0.118 0.140 3.00 3.60
Part Number
KxxxxG
Case Type
DO-15/DO-204AC
Quantity
2000
Packing Option
Box
Information furnished in this document is believed to be accurate and reliable.
However, Jiangsu JieJie Microelectronics Co.,Ltd assumes no responsibility for the
consequences of use without consideration for such information nor use beyond it.
Information mentioned in this document is subject to change without notice, apart
from that when an agreement is signed, Jiangsu JieJie complies with the agreement.
Products and information provided in this document have no infringement of patents.
Jiangsu JieJie assumes no responsibility for any infringement of other rights of third
parties which may result from the use of such products and information.
This document is the first version which is made in 23-May.-2015. This document
supersedes and replaces all information previously supplied.
is a registered trademark of Jiangsu JieJie Microelectronics Co.,Ltd.
Copyright ©2015 Jiangsu JieJie Microelectronics Co.,Ltd. Printed All rights reserved.
TEL:+86-513-83639777
- 4 / 4-
http://www.jjwdz.com