K1500G.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 K1500G 데이타시트 다운로드

No Preview Available !

JIEJIE MICROELECTRONICS CO. , Ltd
KxxxxG Series Sidac
Rev.3
DESCRIPTION:
The sidac is a silicon bilateral voltage triggered switch with greater power-handling
capabilities than standard diacs. Upon application of a voltage exceeding the sidac
breakover voltage point, the sidac switches on through a negative resistance region to
a low on-state voltage. Conduction continues until the current is interrupted or drops
below the minimum holding current of the device.
APPLICATIONS:
High-voltage lamp ignitors
Natural gas ignitors
Gas oil ignitors
High-voltage power supplies
Xenon ignitors
Overvoltage protector
Pulse generators
Fluorescent lighting ignitors HID lighting ignitors
DO-15
12
symbol
FEATURES:
Excellent capability of absorbing transient surge
Quick response to surge voltage (ns Level)
Glass-passivated junctions
High voltage lcmp ignitors
ABSOLUTE MAXIMUM RATINGS (TA=25, RH=45%-75%, unless otherwise noted)
Parameter
Symbol
Value
Unit
Storage temperature range
Operating junction temperature range
On-state RMS current
Maximum surge on-state current
non-repetitive one cycle peak value (50Hz)
Critical rate-of-rise of on-state current
TSTG
TJ
IT
ITSM
diT/dt
-40 to +125
-40 to +125
1.0
16.7
80
A
A
A/µs
TEL:+86-513-83639777
- 1 / 5-
http://www.jjwdz.com

No Preview Available !

KxxxxG Series
JieJie Microelectronics CO. , Ltd
ELECTRICAL CHARACTERISTICS (TA=25)
Symbol
Parameter
VDRM
IDRM
VS
IS
RS
VT
IH
VBO
IBO
Peak off-state voltage
Off-state current
Switching voltage
Switching current
Switching resistance
On-state voltage
Holding current
Breakover Voltage
Breakover current
V-I Curve
ELECTRICAL CHARACTERISTICS (TA=25, continued)
IDRM@VDRM
VBO
IBO VT@ IT=1A IH RS
Part
Number
µA
V
V µA V mA kΩ
max min min max max max
min min
Marking
K0900G 1 70 80 97 50 2 10 0.1 DB090
K1050G 1 90 95 113 50 2 10 0.1 DB105
K1200G 1 100 110 125 50 2 10 0.1 DB120
K1300G 1 110 120 138 50 2 10 0.1 DB130
K1400G 1 120 130 146 50 2 10 0.1 DB140
K1500G 1 130 140 170 50 2 10 0.1 DB150
K1800G 1 160 170 195 50 2 10 0.1 DB180
K2000G 1 180 190 215 50 2 10 0.1 DB200BW
K2200G 1 190 205 230 50 2 10 0.1 DB220BW
K2400G 1 200 220 250 50 2 10 0.1 DB240BW
K2600G 1 220 240 270 50 2 10 0.1 DB260BW
TEL:+86-513-83639777
- 2 / 5-
http://www.jjwdz.com

No Preview Available !

KxxxxG Series
ORDERING INFORMATION
JieJie Microelectronics CO. , Ltd
SOLDERING PARAMETERS
Reflow Condition
Pre Heat
-Temperature Min (Ts(min))
-Temperature Max(Ts(max))
-Time (Min to Max) (ts)
Average ramp up rate (Liquidus Temp (TL) to peak)
Ts(max) to TL - Ramp-up Rate
Reflow
-Temperature(TL) (Liquidus)
-Temperature(tL)
Peak Temp (Tp)
Time within 5of actual Peak Temp (tp)
Ramp-down Rate
Time 25to Peak Temp (TP)
Do not exceed
Pb-Free assembly
(see FIG.2)
+150
+200
60-180 secs.
3/sec. Max
3/sec. Max
+217
60-150 secs.
+260(+0/-5)
30 secs. Max
6/sec. Max
8 min. Max
+260
FIG.1: Maximum allowable ambient temperature
versus on-state current
FIG.2: Reflow condition
TA()
140
120
100
Current waveform: sinusoidal-50Hz
Load: resistive or inductive
Free air rating
TP
TL
Ramp-up
tp
Critical Zone
TL to TP
tL
TS(max)
80
Ramp-down
60 Preheat
TS(min)
40 ts
25
200 0.2 0.4 0.6 0.8 1.0 1.2 1.4
IT(A)
25 time to peak temperatue
(t 25to peak)
Time
TEL:+86-513-83639777
- 3 / 5-
http://www.jjwdz.com

No Preview Available !

KxxxxG Series
FIG.3: Normalized Vs change vs. junction
temperature
Percent of Vs change(%)
12
8
4
25
0
-4
-8 Tj()
-40 -20 0 20 40 60 80 100 120 140
JieJie Microelectronics CO. , Ltd
FIG.4: Normalized DC holding current vs. case
temperature
IH(Tj)/IH(Tj=25)
2.0
1.8
1.6
1.4
1.2 25
1.0
0.8
0.6
0.4 TC()
-40 -20 0 20 40 60 80 100 120 140
PACKAGE MECHANICAL DATA
Dimensions
Ref. Inches
Millimeters
Min. Max. Min. Max.
A 1.000 - 25.40 -
D B 0.228 0.300 5.80 7.62
C 0.022 0.035 0.56 0.89
D 0.102 0.142 2.60 3.60
C
DO-15
Part Number
KxxxxG
UNIT WEIGHT
(g/PCS) typ.
0.38
Case Type
DO-15/DO-204AC
Quantity
2000
Packing Option
Box
TEL:+86-513-83639777
- 4 / 5-
http://www.jjwdz.com

No Preview Available !

KxxxxG Series
JieJie Microelectronics CO. , Ltd
Information furnished in this document is believed to be accurate and reliable.
However, Jiangsu JieJie Microelectronics Co.,Ltd assumes no responsibility for the
consequences of use without consideration for such information nor use beyond it.
Information mentioned in this document is subject to change without notice, apart from
that when an agreement is signed, Jiangsu JieJie complies with the agreement.
Products and information provided in this document have no infringement of patents.
Jiangsu JieJie assumes no responsibility for any infringement of other rights of third
parties which may result from the use of such products and information.
This document is the third version which is made in 10-May-2017. This document
supersedes and replaces all information previously supplied.
is a registered trademark of Jiangsu JieJie Microelectronics Co.,Ltd.
Copyright ©2017 Jiangsu JieJie Microelectronics Co.,Ltd. Printed All rights reserved.
TEL:+86-513-83639777
- 5 / 5-
http://www.jjwdz.com