2SA2182.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 2SA2182 데이타시트 다운로드

No Preview Available !

TOSHIBA Transistor Silicon PNP Epitaxial Type
2SA2182
Power Amplifier Applications
Driver Stage Amplifier Applications
High transition frequency: fT = 80 MHz (typ.)
2SA2182
Unit: mm
Absolute Maximum Ratings (Tc = 25°C)
Characteristic
Symbol
Rating
Unit
Collector-base voltage
VCBO
230
V
Collector-emitter voltage
VCEO
230
V
Emitter-base voltage
VEBO 5 V
Collector current
Base current
DC
pulse
IC
1.0
A
ICP
2.0
A
IB
100
mA
1 : BASE
2 : COLLECTOR
3 : EMITTER
Ta = 25°C
Collector power dissipation
Tc = 25°C
Junction temperature
Storage temperature range
PC
Tj
Tstg
2
20
150
55~150
W
W
°C
°C
Note: Using continuously under heavy loads (e.g. the application of high
JEDEC
JEITA
SC-67
TOSHIBA
2-10U1A
Weight: 1.7 g (typ.)
temperature/current/voltage and the significant change in temperature, etc.) may cause this product to
decrease in the reliability significantly even if the operating conditions (i.e. operating
temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
1 2006-11-13

No Preview Available !

Electrical Characteristics (Tc = 25°C)
Characteristic
Collector cut-off current
Emitter cut-off current
Collector-emitter breakdown voltage
DC current gain
Collector-emitter saturation voltage
Base-emitter voltage
Transition frequency
Collector output capacitance
Symbol
Test Conditions
ICBO
IEBO
V (BR) CEO
hFE
VCE (sat)
VBE
fT
Cob
VCB = − 230 V, IE = 0
VEB = − 5 V, IC = 0
IC = − 10 mA, IB = 0
VCE = − 5 V, IC = − 0.1 A
IC = − 500 mA, IB = − 50 mA
VCE = − 5 V, IC = − 500 mA
VCE = − 10 V, IC = − 100 mA
VCB = − 10 V, IE = 0, f = 1MHZ
Marking
2SA2182
Min Typ. Max Unit
⎯ ⎯ − 100 nA
⎯ ⎯ − 100 nA
230 ⎯ ⎯ V
100 320
⎯ ⎯ − 0.5 V
⎯ ⎯ − 1.0 V
80 MHZ
22.5
pF
2SA2182
Part No. (or abbreviation code)
Lot No.
A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
2 2006-11-13

No Preview Available !

1
0.8
0.6
0.4
0.2
0
0
IC – VCE
20mA
10 mA
5 mA
4 mA
3 mA
2 mA
IB = 1 mA
Common emitter
VCE = 5 V
Single non-repetitive pulse
2 4 6 8 10
Collector-emitter voltage VCE (V)
1000
100
hFE – IC
Tc = 100°C
25°C
25°C
10
Common emitter
VCE = 5 V
1 Single non-repetitive pulse
0.001
0.01
0.1
1
Collector current IC (A)
10
2SA2182
IC – VBE
2 Common emitter
VCE = 5 V
Single non-repetitive pulse
1.5
1
0.5
Tc = 100°C 25
25
0
0 0.2 0.4 0.6 0.8 1 1.2 1.4
Base-emitter voltage VBE (V)
VCE (sat) – IC
10 Common emitter
β=10
Single non-repetitive pulse
1
0.1
0.01
0.001
Tc = 100°C
25°C
25°C
0.01
0.1
1
Collector current IC (A)
10
1000
100
Common emitter
Ta=25
VCE= 10V
fT – IC
10
1
0.001
0.01
0.1
Collector current IC (A)
1
24
20
PC – Ta
Tc=Ta Infinite heat sink
No heat sink
16
12
8
4
0
0
40 80 120
Ambient temperature Ta (°C)
160
3 2006-11-13

No Preview Available !

Safe Operating Area
10
IC max. (pulsed)*
1 ms*
1 IC max. (continuous)
DC operation
Tc = 25
10 ms*
100 ms*
0.1
*: Single non-repetitive pulse
Tc = 25°C
Curves must be de-rated
linearly with increase in
0.01 temperature.
1 10
100
Collectoremitter voltage VCE (V)
1000
2SA2182
4 2006-11-13

No Preview Available !

2SA2182
RESTRICTIONS ON PRODUCT USE
The information contained herein is subject to change without notice.
20070701-EN
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
5 2006-11-13