DCR1020SF60.pdf 데이터시트 (총 3 페이지) - 파일 다운로드 DCR1020SF60 데이타시트 다운로드

No Preview Available !

YANGZHOU POSITIONING TECH. CO., LTD
HIGH POWER THYRISTOR FOR PHASE CONTROL APPLICATIONS
Features:
DCR1020SF60~65
. All Diffused Structure
. Center Amplifying Gate Configuration
. Blocking capabilty up to 4200 volts
. Guaranteed Maximum Turn-Off Time
. High dV/dt Capability
. Pressure Assembled Device
ELECTRICAL CHARACTERISTICS AND RATINGS
Blocking - Off State
VRRM (1) VDRM (1) VRSM (1)
6000~6500
6000~6500
6100~6600
VRRM = Repetitive peak reverse voltage
VDRM = Repetitive peak off state voltage
VRSM = Non repetitive peak reverse voltage (2)
Repetitive peak reverse
leakage and off state
lCeraitkicaaglerate of voltage rise
IRRM / IDRM
dV/dt (4)
25 mA
150 mA (3)
1000 V/sec
Conducting - on state
Notes:
All ratings are specified for Tj=25 oC unless
otherwise stated.
(1) All voltage ratings are specified for an applied
50Hz/60zHz sinusoidal waveform over the
temperature range -40 to +125 oC.
(2) 10 msec. max. pulse width
(3) Maximum value for Tj = 125 oC.
(4) Minimum value for linear and exponential
waveshape to 80% rated VDRM. Gate open.
Tj = 125 oC.
(5) Non-repetitive value.
(6) The value of di/dt is established in accordance
with EIA/NIMA Standard RS-397, Section
5-2-2-6. The value defined would be in addi-
tion to that obtained from a snubber circuit,
comprising a 0.2 F capacitor and 20 ohms
resistance in parallel with the thristor under
test.
Parameter
Average value of on-state
current
RMS value of on-state current
Peak one cPSTCle surge
(non repetitive) current
I square t
Latching current
Holding current
Peak on-state voltage
Critical rate of rise of on-state
current (5, 6)
Critical rate of rise of on-state
current (6)
Symbol
IT(AV)
ITRMS
ITSM
I2t
IL
IH
VTM
di/dt
di/dt
Min. Max. Typ. Units
Conditions
640
A
Sinewave,180o
conduction,Tc=60oC
1005
A Nominal value
-
8.5
0.36x106
8.3 msec (60Hz), sinusoidal wave-
shape, 180o conduction, Tj = 125
KA oC
10.0 msec (50Hz), sinusoidal
KA wave-
shape, 180o conduction, Tj = 125
oC
A2s 8.3 msec and 10.0 msec
600 mA VD = 24 V; RL= 12 ohms
200 mA VD = 24 V; I = 2.5 A
3.6
V
ITM = 1800 A; Duty cPSTCle
0.01%; Tj = 25 oC
-
A/s
Switching from VDRM 1000 V,
non-repetitive
100 A/s Switching from VDRM 1000 V
Tel: +86-514-87782298, 87782296 FAX:+86-514-87782297, 87367519
E-mail :positioning@china.com; yzforever@vip.tom.com; yzpst@pst888.com
WEB SITEhttp://www.pst888.com www.yzpst.cc

No Preview Available !

YANGZHOU POSITIONING TECH. CO., LTD
ELECTRICAL CHARACTERISTICS AND RATINGS
Gating
Parameter
Symbol Min. Max.
Peak gate power dissipation
PGM
150
Average gate power dissipation
Peak gate current
Gate current required to trigger
all units
Gate voltage required to trigger
all units
PG(AV)
IGM
IGT
VGT
5
-
-
300
-
-
3.0
-
Peak negative voltage
Dynamic
Parameter
Delay time
VGRM
5
Symbol Min. Max.
td -
Turn-off time (with VR = -50 V)
tq
Reverse recovery charge
Qrr
* For guaranteed max. value, contact factory.
-
*
Typ. Units
Conditions
W tp = 40 us
W
A
mA VD = 6 V;RL = 3 ohms;Tj = -40 oC
mA VD = 6 V;RL = 3 ohms;Tj = +25 oC
mA VD = 6 V;RL = 3 ohms;Tj = +125oC
V
V
V
VD = 6 V;RL = 3 ohms;Tj = -40 oC
VD = 6 V;RL = 3 ohms;Tj = 0-125oC
VD = Rated VDRM; RL = 1000 ohms;
Tj = + 125 oC
V
Typ.
0.5
600
Units
s
s
C
Conditions
ITM = 50 A; VD = Rated VDRM
Gate pulse: VG = 20 V; RG = 20
ohms; tr = 0.1 s; tp = 20 s
ITM = 1000 A; di/dt = 25 A/s;
VR -50 V; Re-applied dV/dt = 20
V/s linear to 80% VDRM; VG = 0;
Tj = 125 oC; Duty cPSTCle
0.01%
ITM = 1000 A; di/dt = 25 A/s;
VR -50 V
THERMAL AND MECHANICAL CHARACTERISTICS AND RATINGS
Parameter
Operating temperature
Symbol Min. Max. Typ. Units
Tj -40 +125
oC
Conditions
Storage temperature
Thermal resistance - junction to case
Thermal resistamce - case to sink
Thermal resistamce - junction to sink
Mounting force
Tstg
R(j-c)
R(c-s)
R(j-s)
P
-40 +125
0.022
0.052
0.004
0.008
-
-
18 22
oC
oC/W
oC/W
oC/W
kN
Double sided cooled
Single sided cooled
Double sided cooled *
Single sided cooled *
Double sided cooled *
Single sided cooled *
Weight
W -g
* Mounting surfaces smooth, flat and greased
Tel: +86-514-87782298, 87782296 FAX:+86-514-87782297, 87367519
E-mail :positioning@china.com; yzforever@vip.tom.com; yzpst@pst888.com
WEB SITEhttp://www.pst888.com www.yzpst.cc

No Preview Available !

YANGZHOU POSITIONING TECH. CO., LTD
CASE OUTLINE AND DIMENSIONS
Sym
A
B
C
DH
mm 75
47
66
3.5×3
26±1
Tel: +86-514-87782298, 87782296 FAX:+86-514-87782297, 87367519
E-mail :positioning@china.com; yzforever@vip.tom.com; yzpst@pst888.com
WEB SITEhttp://www.pst888.com www.yzpst.cc