B101EVN02.1.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 B101EVN02.1 데이타시트 다운로드

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specifications
Specifications
(V ) Final
Module
Model Name
Note
10.1”(10.07”) WXGA 16:10 Color TFT-LCD
with LED Backlight design
B101EVN02.1
LED Backlight with driving circuit design
Color Management (Virtual and Rich Color Solution )
Dynamic Contrast Ratio (Power Saving Solution)
Customer
Date
Checked &
Approved by
Date
Note: This Specification is subject to change
without notice.
Approved by
Date
Trista Jiang
05/10/2012
Prepared by
Singing Lee
05/10/2012
NBBU Marketing Division
AU Optronics corporation
B101EVN02.1 Document Version : 1.0
1 of 31

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions............................................................4
2. General Description...............................................................5
2.1 General Specification..................................................................................................................5
2.2 Optical Characteristics................................................................................................................6
3. Functional Block Diagram....................................................11
.........................................................................................................................................................11
4. Absolute Maximum Ratings ................................................12
4.1 Absolute Ratings of TFT LCD Module.....................................................................................12
5. Electrical Characteristics.....................................................13
5.1 TFT LCD Module.....................................................................................................................13
5.2 Backlight Unit...........................................................................................................................15
6. Signal Interface Characteristic............................................17
6.1 Pixel Format Image...................................................................................................................17
6.2 The Input Data Format..............................................................................................................18
6.3 Integration Interface Requirement.............................................................................................19
6.4 LVDS Interface Timing ............................................................................................................20
6.5 Power ON/OFF Sequence.........................................................................................................23
7. Reliability Test.................................................................... 24
8. Mechanical Characteristics..................................................25
9. Shipping and Package.........................................................27
9.1 Shipping Label Format..............................................................................................................27
.........................................................................................................................................................27
9.2 Carton Label Format.................................................................................................................27
.........................................................................................................................................................27
9.3 Shipping Package of Palletizing Sequence...............................................................................28
10. Appendix ..................................................................................................................................29
10.1 EDID Description....................................................................................................................29
B101EVN02.1 Document Version : 1.0
2 of 31

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and Date
Page
0.1 2011/08/12 All
0.2 2011/09/19 26
0.3 2011/11/30
0.4 2011/12/15 30
25, 26
0.5 2011/12/28 6
13
1.0 2012/05/10 31
Old description
1st preliminary version
TBD
New Description
S/L picture
Update EDID
Update 2D Drawing
Update Operating/Storage Temp
Update Operating/Storage Temp
Final Polish and correction
Update Shipping Package of
Palletizing Sequence
Remark
B101EVN02.1 Document Version : 1.0
3 of 31

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
12)Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Disconnecting power supply before handling LCD modules, it can prevent electric shock, DO
NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT module
that a LED light bar build in as a light source of back light unit. It can prevent electrostatic
breakdown.
B101EVN02.1 Document Version : 1.0
4 of 31

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
2. General Description
B101EV02.1is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a
driver circuit, and LED backlight system. The screen format is intended to support the 16:10
WXGA, 1280(H) x800(V) screen and 262k colors (RGB 6-bits data driver) with LED backlight
driving circuit. All input signals are LVDS interface compatible.
B101EVN02.1 is designed for a display unit of notebook style personal computer and industrial
machine.
2.1 General Specification
The following items are characteristics summary on the table at 25 condition:
Items
Screen Diagonal
Active Area
Pixels H x V
Pixel Pitch
Pixel Format
Display Mode
Unit
[mm]
[mm]
[mm]
Specifications
255.85 (10.07W”)
216.96(H) x 135.6(V)
1280 x 3(RGB) x 800
0.1695 X 0.1695
R.G.B. Vertical Stripe
Normally Black
White Luminance (ILED=21mA)
(Note: ILED is LED current)
Luminance Uniformity
Contrast Ratio
Response Time
Nominal Input Voltage VDD
Power Consumption
[cd/m2]
300 typ. (5 points average l
255 min. (5 points average )
[ms]
[Volt]
[Watt]
1.25 max. (5 points)
1300 typ, 1000 min.
25 typ / 35 Max
+3.3 typ.
3.4 max. (Include Logic and Blu power)
Weight
Physical Size (panel only)
without bracket
Electrical Interface
[Grams] 180 max (Panel only)
[mm]
Length
Width
Thickness
Min.
228.96
148.7
---
1 channel LVDS
Typ.
229.46
149.2
---
Max.
229.95
149.7
5.2
B101EVN02.1 Document Version : 1.0
5 of 31