OCP2182.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 OCP2182 데이타시트 다운로드

No Preview Available !

OCP2182
1.5MHz, 1.6A Synchronous Step-Down DC-DC Converter
General Description
The OCP2182 is a 1.5MHz constant frequency, high
efficiency, high current, slope compensated current
mode PWM step-down DC-DC converter. The
device integrates a main switch and a synchronous
rectifier for high efficiency without an external
Schottky diode. The OCP2182 can operate from a
2.5V to 5.5V input voltage and is ideal for powering
portable equipment that runs from a single cell
lithium-Ion (Li+) battery. It can supply 1.6A output
current and can also run at 100% duty cycle for low
dropout operation, extending battery life in portable
system. Pulse Skipping Mode operation at light
loads provides very low output ripple voltage for
noise sensitive applications.
The OCP2182 is offered in small profile 10-Lead
MSOP and DFN packages, and is available in an
adjustable version and fixed output voltage of
1.0V,1.2V,1.5V and 1.8V.
Applications
Portable Instruments
Digital Cameras
Cellular and Smart Telephones
PDAs
DSP Core Supplies
Pin Configuration
1) MSOP-10
(Top View)
EN 1
PVIN 2
SVIN 3
SGND 4
VFB 5
11
EXPOSED PAD
10 PGND
9 PGND
8 SW
7 SW
6 NC
Features
High Efficiency : Up to 95%
1.5MHz Constant Switching Frequency
1.6A Output Current
2.5V to 5.5V Input Voltage Range
Output Voltages from 0.6V to 5V
Low RDS(ON) Internal Switches: 90mΩ
Available in Fixed Output Voltages of
1.0V,1.2V,1.5V,1.8V and Adjustable Version
Allow use of ceramic capacitors
Current Mode Operation for excellent line and
load transient Response
Short-Circuit Protection
Low Dropout Operation:100% Duty Cycle
Low Shutdown Current: Ishutdown<1μA
Small 10-Lead MSOP and DFN Packages
2) DFN-10
(Top View)
EN 1
PVIN 2
SVIN 3
SGND 4
VFB 5
11
EXPOSED PAD
10 PGND
9 PGND
8 SW
7 SW
6 NC
Pin Number
1
2
3
4
5
6
7,8
9,10
11
Pin Name
EN
PVIN
SVIN
SGND
VFB/VOUT
NC
SW
PGND
EXPOSED PAD
Pin Function
Chip Enable ;EN=VIN, Enable; EN=GND, Disable
Power Supply Pin
Signal Supply Pin
Signal Ground Pin
Feedback Input Pin. It receives the feedback voltage from the external
resistive divider across the output.
Output voltage feedback Pin. An internal resistive divider divides the output
voltage down for comparison to the internal reference voltage.
No Connect
Power Switch Output
Power Ground
Power Ground. It must be connect to ground properly.
Page1 - 2
Rev. 1.2 Feb .27, 2018
源于灿瑞 磁传天下

No Preview Available !

OCP2182
1.5MHz, 1.6A Synchronous Step-Down DC-DC Converter
Ordering Information
OCP2182XXXX
Package:
MS: MSOP-10
Q: DFN-10
Output Voltage:
Blank: ADJ
10:1.0V
12:1.2V
15:1.5V
18:1.8V
Packing:
Temperature Grade:
Blank:Tube or Bulk D: -40~85
A:Tape & Reel
注:想进一步了解产品咨询,请直接点击申请样品。我们会第一时间联系您!谢谢!
Page2 - 2
Rev. 1.2 Feb .27, 2018
源于灿瑞 磁传天下