AA1218.pdf 데이터시트 (총 10 페이지) - 파일 다운로드 AA1218 데이타시트 다운로드

No Preview Available !

DATA SHEET
ANTI-SULFURATED CHIP RESISTORS
AUTOMOTIVE GRADE
AA series
±5%, ±1%, ±0.5%
sizes 0201/0402/0603/0805/1206/
1210/1218/2010/2512
RoHS compliant & Halogen free

No Preview Available !

Chip Resistor Surface Mount AA SERIES 0201 to 2512
Product specification 2
10
SCOPE
This specification describes AA0201
to AA2512 chip resistors with lead-
free terminations made by thick film
process.
APPLICATIONS
Car electronics
Engine control unit
Body control system
Safety devices
FEATURES
Superior resistance against sulfur
containing atmosphere
AEC-Q200 qualified
Moisture sensitivity level: MSL1
AA series soldering is compliant
with J-STD-020D
Halogen free epoxy
RoHS compliant
Reduce environmentally
hazardous waste
High component and equipment
reliability
The resistors are 100% performed
by automatic optical inspection
ORDERING INFORMATION - GLOBAL PART NUMBER
Part number is identified by the series name, size, tolerance, packaging
type, temperature coefficient, taping reel and resistance value.
GLOBAL PART NUMBER
AA XXXX X X X XX XXXX L
(1) (2) (3) (4) (5)
(6) (7)
(1) SIZE
0201 / 0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512
(2) TOLERANCE
D =± 0.5%
F = ± 1%
J = ± 5% (for Jumper ordering, use code of J)
(3) PACKAGING TYPE
R = Paper/PE taping reel
K = Embossed taping reel
(4) TEMPERATURE COEFFICIENT OF RESISTANCE
= Base on spec
(5) TAPING REEL
07 = 7 inch dia. Reel
(6) RESISTANCE VALUE
13 = 13 inch dia. Reel
1Ω to 10 MΩ
There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point, no
need to mention the last zero after R/K/M, e.g.1K2, not 1K20.
(7) DEFAULT CODE
Letter L is the system default code for ordering only. (Note)
Dec 08, 2015 V.3
Resistance rule of global part
number
Resistance coding
rule
Example
XRXX
(1 to 9.76 Ω)
XXRX
(10 to 97.6 Ω)
XXXR
(100 to 976 Ω)
XKXX
(1 to 9.76 KΩ)
XMXX
(1 to 9.76 MΩ)
XXMX
(10 MΩ)
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
10R = 10 Ω
97R6 = 97.6 Ω
100R = 100 Ω
976R = 976 Ω
1K = 1,000 Ω
9K76 = 9760 Ω
1M = 1,000,000 Ω
9M76= 9,760,000 Ω
10M = 10,000,000 Ω
ORDERING EXAMPLE
The ordering code for an AA0402 chip
resistor, value 100 KΩ with ±1%
tolerance, supplied in 7-inch tape reel is:
AA0402FR-07100KL
NOTE
1. All our R-Chip products are RoHS
compliant and Halogen free. "LFP" of the
internal 2D reel label states "Lead-Free
Process".
2. On customized label, "LFP" or specific
symbol can be printed.
www.yageo.com

No Preview Available !

Chip Resistor Surface Mount AA SERIES 0201 to 2512
Product specification 3
10
MARKING
AA0201 / AA0402
No marking
Fig. 1
AA0603 / AA0805 / AA1206 / AA1210 / AA2010 / AA2512
03
Fig. 2 Value=10 KΩ
AA0603
E-24 series: 3 digits, ±5%
First two digits for significant figure and 3rd digit for number of zeros
Fig. 3
0
Value = 24 Ω
E-24 series: 3 digits, ±1%
One short bar under marking letter
Fig. 4 Value = 12.4 KΩ
E-96 series: 3 digits, ±1%
First two digits for E-96 marking rule and 3rd letter for number of zeros
AA0805 / AA1206 / AA1210 / AA2010 / AA2512
00
Fig. 5 Value = 10 KΩ
AA1218
Both E-24 and E-96 series: 4 digits, ±1%
First three digits for significant figure and 4th digit for number of zeros
Fig. 6 Value = 10 KΩ
E-24 series: 3 digits, ±5%
First two digits for significant figure and 3rd digit for number of zeros
00
Fig. 7 Value = 10 KΩ
Both E-24 and E-96 series: 4 digits, ±1%
First three digits for significant figure and 4th digit for number of zeros
NOTE
For further marking information, please refer to data sheet Chip resistors marking. Marking of AA series is the same as RC series.
Dec 08, 2015 V.3
www.yageo.com

No Preview Available !

Chip Resistor Surface Mount AA SERIES 0201 to 2512
Product specification 4
10
CONSTRUCTION
The resistors are constructed on top of an automotive
grade ceramic body. Internal metal electrodes are
added at each end and connected by a resistive glaze.
The resistive glaze is covered by a lead-free glass.
The composition of the glaze is adjusted to give the
approximately required resistance value and laser
trimming of this resistive glaze achieves the value within
tolerance. The whole element is covered by a protective
overcoat. Size 0603 and bigger is marked with the
resistance value on top. Finally, the two external
terminations (Ni / matte tin) are added, as shown in Fig.8.
OUTLINES
YNSC088
Fig. 8 Chip resistor outlines
marking layer
overcoat
protective glass
resistive layer
(Jumper chip is a conductor)
inner electrode
termination(Ni/matte tin)
inner electrode
ceramic substrate
DIMENSIONS
Table 1 For outlines, please refer to Fig. 9
TYPE
L (mm)
AA0201
0.60 ± 0.03
AA0402
1.00 ± 0.05
AA0603
1.60 ± 0.10
AA0805
2.00 ± 0.10
AA1206
3.10 ± 0.10
AA1210
3.10 ± 0.10
AA1218
3.10 ± 0.10
AA2010
5.00 ± 0.10
AA2512
6.35 ± 0.10
W (mm)
0.30 ± 0.03
0.50 ± 0.05
0.80 ± 0.10
1.25 ± 0.10
1.60 ± 0.10
2.60 ± 0.15
4.60 ± 0.10
2.50 ± 0.15
3.10 ± 0.15
H (mm)
0.23 ± 0.03
0.32 ± 0.05
0.45 ± 0.10
0.50 ± 0.10
0.55 ± 0.10
0.50 ± 0.10
0.55 ± 0.10
0.55 ± 0.10
0.55 ± 0.10
I1 (mm)
0.12 ± 0.05
0.20 ± 0.10
0.25 ± 0.15
0.35 ± 0.20
0.45 ± 0.20
0.45 ± 0.15
0.45 ± 0.20
0.55 ± 0.15
0.60 ± 0.20
I2 (mm)
0.15 ± 0.05
0.25 ± 0.10
0.25 ± 0.15
0.35 ± 0.20
0.40 ± 0.20
0.50 ± 0.20
0.40 ± 0.20
0.50 ± 0.20
0.50 ± 0.20
For dimension, please refer to Table 1
AA0201 / AA0402
AA0603/0805/1206/
1210/2010/2512
AA1218
Side view for all type
Fig. 9 Chip resistor dimensions
Dec 08, 2015 V.3
www.yageo.com

No Preview Available !

Chip Resistor Surface Mount AA SERIES 0201 to 2512
Product specification 5
10
ELECTRICAL CHARACTERISTICS
Table 2
TYPE
CHARACTERISTICS
RESISTANCE
Operating
Max.
Max. Dielectric
RANGE Temperature Range Working Overload Withstanding
Voltage Voltage
Voltage
Temperature
Coefficient
of Resistance
Jumper Criteria
AA0201
25V 50V
AA0402
50 V
AA0603
AA0805
AA1206
AA1210
5% (E24)
1ΩR 22MΩ
(0201: Max. 10MΩ.
1218: Max. 1MΩ)
0.5%, 1% (E24/E96)
1ΩR 10MΩ
(1218: Max. 1MΩ)
Jumper < 50mΩ
55 °C to +155 °C
75V
150 V
200 V
200 V
AA1218
200 V
AA2010
200 V
AA2512
200 V
100 V
150 V
300 V
400 V
500 V
500 V
500 V
500 V
1Ω R 10Ω, Rated Current 0.5A
-100/+400 ppm/°C
50V 10Ω < R 10 MΩ,
± 300 ppm/°C Max. Current 1.0A
100 V
Rated Current 1A
Max. Current 2A
150 V
Rated Current 1A
Max. Current 2A
300 V
500 V
Rated Current 2A
1Ω R 10Ω, Max. Current 5A
± 200 ppm/°C Rated Current 2A
10Ω < R 10 MΩ, Max. Current 10A
± 150 ppm/°C Rated Current 2A
500 V 10 MΩ < R 22 MΩ, Max. Current 10A
± 200 ppm/°C Rated Current 6A
500 V
Max. Current 10A
500 V
Rated Current 2A
Max. Current 10A
500 V
Rated Current 2A
Max. Current 10A
Dec 08, 2015 V.3
www.yageo.com