G150X1-L03-V508.pdf 데이터시트 (총 26 페이지) - 파일 다운로드 G150X1-L03-V508 데이타시트 다운로드

No Preview Available !

DATA DISPLAY GROUP
Datasheet
G150X1-L03-V508
based on CMO G150X1-L03
with LED backlight unit and optimized sunlight readability
CH-03-015
Rev 1.1
2010-04-12
The information contained in this document has been carefully researched and is, to the best of our
knowledge, accurate. However, we assume no liability for any product failures or damages, immediate or
consequential, resulting from the use of the information provided herein. Our products are not intended for
use in systems in which failures of product could result in personal injury. All trademarks mentioned herein
are property of their respective owners. All specifications are subject to change without notice.

No Preview Available !

G150X1-L03-V508
- CONTENTS -
REVISION HISTORY
-------------------------------------------------------
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
-------------------------------------------------------
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
-------------------------------------------------------
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
-------------------------------------------------------
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
-------------------------------------------------------
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 COLOR DATA INPUT ASSIGNMENT
-------------------------------------------------------
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
-------------------------------------------------------
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
-------------------------------------------------------
3
5
6
7
10
11
13
16
8. PACKAGING
8.1 PACKING SPECIFICATIONS
8.2 PACKING METHOD
9. DEFINITION OF LABELS
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
10.2 SAFETY PRECAUTIONS
10.3 OPERATION PRECAUTIONS
11. MODULE DRAWING
-------------------------------------------------------
20
-------------------------------------------------------
-------------------------------------------------------
22
23
-------------------------------------------------------- 24
Page 2 / 26

No Preview Available !

REVISION HISTORY
Version Date Section
Description
Ver 1.0 Oct.8 2008 All G150X1-L03 Approval SPEC was first issued
1.1 Apr.12 2010 page 16 optical characteristics improved
G150X1-L03-V508
Page 3 / 26

No Preview Available !

G150X1-L03-V508
1. GENERAL DESCRIPTION
1.1 OVERVIEW
G150X1-L03-V508 is a 15.0” TFT Liquid Crystal Display module with an LED Backlight unit and 20 pins LVDS
interface. This module supports 1024 x 768 XGA mode and can display 16.2M colors.
The PSWG is to establish a set of displays with standard mechanical dimensions and select electrical
interface requirements for an industry standard 15.0” XGA LCD panel and the inverter module for Backlight
is not built in.
1.2 FEATURES
- XGA (1024 x 768 pixels) resolution
- DE(Data Enable) only mode
- LVDS Interface with 1pixel/clock
- PSWG (Panel Standardization Working Group)
- Wide operating temperature.
- optimized Sunlight Readability
1.3 APPLICATION
-TFT LCD Monitor
-TFT LCD TV
- Industrial Application
- Amusement
- Vehicle
1.4 GENERAL SPECIFICATI0NS
Item
Active Area
Bezel Opening Area
Driver Element
Pixel Number
Pixel Pitch
Pixel Arrangement
Display Colors
Display Mode
Surface Treatment
Specification
304.128 (H) x 228.096(V) (15.0” diagonal)
307.4(H) x 231.3(V)
a-Si TFT active matrix
1024 x R.G.B x 768
0.297(H) x 0.297(W)
RGB vertical Stripe
16.2M
Normally White
Hard coating (3H), Glare
Unit
mm
mm
-
pixel
mm
-
color
-
-
Note
(1)
-
-
-
-
-
-
-
Page 4 / 26

No Preview Available !

G150X1-L03-V508
1.5 MECHANICAL SPECIFICATIONS
Item
Horizontal(H)
Module Size Vertical(V)
Depth(D)
Weight
Min.
326
253
13.35
Typ.
326.5
253.5
13.85
970
Max.
327
254
14.35
1000
Unit Note
mm (1)
mm
mm (1)(2)
g-
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) The depth is without connector.
+/- 0.5mm
Page 5 / 26