L-63GD.pdf 데이터시트 (총 6 페이지) - 파일 다운로드 L-63GD 데이타시트 다운로드

No Preview Available !

T-1 3/4 (5mm) SOLID STATE LAMP
Part Number: L-63GD
Green
Features
z Low profile.
z Low power consumption.
z Long life - solid state reliability.
z Reliable and rugged.
z RoHS compliant.
Description
The Green source color devices are made with Gallium
Phosphide Green Light Emitting Diode.
KingbrightPackage Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAD0448
APPROVED: WYNEC
REV NO: V.12B
CHECKED: Allen Liu
DATE: SEP/22/2014
DRAWN: P.Cheng
PAGE: 1 OF 6
ERP: 1101006136

No Preview Available !

Selection Guide
Part No.
Dice
Lens Type
L-63GD
Green (GaP)
Green Diffused
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Iv (mcd) [2]
@ 10mA
Min. Typ.
8 16
Viewing
Angle [1]
2θ1/2
60°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength
Green
565
nm IF=20mA
tλD [1]
Dominant Wavelength
Green
568
nm IF=20mA
hΔλ1/2
Spectral Line Half-width
Green
30
nm IF=20mA
rigC Capacitance
Green
15
pF VF=0V;f=1MHz
VF [2]
Forward Voltage
Green
2.2 2.5
V
IF=20mA
bIR Reverse Current
Green
10 uA
VR = 5V
gNotes:
1.Wavelength: +/-1nm.
in2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
Kpremature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
Operating/Storage Temperature
Lead Solder Temperature [2]
Lead Solder Temperature [3]
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAD0448
APPROVED: WYNEC
REV NO: V.12B
CHECKED: Allen Liu
Green
62.5
25
140
5
-40°C To +85°C
260°C For 3 Seconds
260°C For 5 Seconds
DATE: SEP/22/2014
DRAWN: P.Cheng
Units
mW
mA
mA
V
PAGE: 2 OF 6
ERP: 1101006136

No Preview Available !

KingbrightGreen
L-63GD
SPEC NO: DSAD0448
APPROVED: WYNEC
REV NO: V.12B
CHECKED: Allen Liu
DATE: SEP/22/2014
DRAWN: P.Cheng
PAGE: 3 OF 6
ERP: 1101006136

No Preview Available !

PACKING & LABEL SPECIFICATIONS
L-63GD
Kingbright
Terms and conditions for the usage of this document
1.The information included in this document reflects representative usage scenarios and is intended
for technical reference only.
2.The part number, type, and specifications mentioned in this document are subject to future change
and improvement without notice. Before production usage customer should refer to the latest
datasheet for the updated specifications.
3.When using the products referenced in this document, please make sure the product is being
operated within the environmental and electrical limits specified in the datasheet. If customer usage
exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4.The information in this document applies to typical usage in consumer electronics applications.
If customer's application has special reliability requirements or have life-threatening liabilities,
such as automotive or medical usage, please consult with Kingbright representative for further
assistance.
5.The contents and information of this document may not be reproduced or re-transmitted without
permission by Kingbright.
6.All design applications should refer to Kingbright application notes available at
http://www.kingbright.com/application_notes
SPEC NO: DSAD0448
APPROVED: WYNEC
REV NO: V.12B
CHECKED: Allen Liu
DATE: SEP/22/2014
DRAWN: P.Cheng
PAGE: 4 OF 6
ERP: 1101006136

No Preview Available !

Kingbright
SPEC NO: DSAD0448
APPROVED: WYNEC
REV NO: V.12B
CHECKED: Allen Liu
DATE: SEP/22/2014
DRAWN: P.Cheng
PAGE: 5 OF 6
ERP: 1101006136