P0080EC.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 P0080EC 데이타시트 다운로드

No Preview Available !

JIEJIE MICROELECTRONICS CO. , Ltd
PxxxxEC Series TSS
Rev.2
DESCRIPTION: 
PxxxxEC series thyristors are a type of semiconduct
component. They are designed in applications: modems,
telephones, line cards, answering machines, FAX
machines, SLICs, T1/E1, xDSL, PBXs and more.
FEATURES: 
 
Excellent capability of absorbing transient surge.
Quick response to surge voltage (ns Level).
 
1
Eliminates overvoltage caused by fast rising transients.
Moisture sensitivity level: Level 1.
Non degenerative.
Package way:1000pcs / bag.
TO92 
Symbol
2
ABSOLUTE MAXIMUM RATINGS (TA=25ºC, unless otherwise noted) 
Parameter
Storage temperature range
Operating junction temperature range
Repetitive peak pulse current
 
ELECTRICAL CHARACTERISTICS (TA=25)
Symbol
TSTG
TJ
IPP
Value
-60 to +150
-40 to +125
100
Unit
A
Symbol
VDRM
IDRM
VS
IS
VT
IT
IH
CO
Parameter
Peak off-state voltage
Off-state current
Switching voltage
Switching current
On-state voltage
On-state current
Holding current
Off-state capacitance
VI Curve 
-V
+I
IT
IS
IH
IDRM
VT
+V
VDRM VS
-I
TEL:+86-513-83639777
-1 / 4-
http://www.jjwdz.com

No Preview Available !

PxxxxEC Series
MARKING 
P2600EC
XX
P2600EC:Device Marking Code
XX: The production cycle
JieJie Microelectronics CO. , Ltd
 
 
ELECTRICAL CHARACTERISTICS (TA=25, continued)
IDRM@VDRM
VS@IS
VT@ IT
IH CO
Part
Number
μA
V
V
mA
V
A mA pF
max max
max max min max
P0080EC 1
6 15 800 4
2.2 50 80
P0640EC 1 58 77 800 4 2.2 120 200
P0720EC 1 65 87 800 4 2.2 120 150
P2300EC 1 190 260 800 4 2.2 150 60
P2600EC 1 220 300 800 4 2.2 150 60
P3100EC 1 275 350 800 4 2.2 150 50
P3500EC 1 320 400 800 4 2.2 150
Vs is measured at 100KV/s
Off-state capacitance is measured in VDC=2V,VRMS=1V, f=1MHz
50
Marking
P0080EC
P0640EC
P0720EC
P2300EC
P2600EC
P3100EC
P3500EC
SURGE RATINGS(Temperature range: -40 ~+85)
Series
C
 
2×10μs
500
IPP(A) min
8×20μs
10×360μs
400 175
ORDERING INFORMATION 
10×1000μs
100
TEL:+86-513-83639777
-2 / 4-
 
http://www.jjwdz.com

No Preview Available !

PxxxxEC Series
JieJie Microelectronics CO. , Ltd
SOLDERING PARAMETERS 
Reflow Condition
-Temperature Min (Ts(min))
Pre Heat
-Temperature Max(Ts(max))
-Time (Min to Max) (ts)
Average ramp up rate (Liquidus Temp (TL)to peak)
Ts(max) to TL - Ramp-up Rate
Reflow
-Temperature(TL) (Liquidus)
-Temperature(tL)
Peak Temp (Tp)
Time within 5of actual Peak Temp (tp)
Ramp-down Rate
Time 25to Peak Temp (TP)
Do not exceed
Pb-Free assembly
(see FIG.2)
+150
+200
60-180 secs.
3/sec. Max
3/sec. Max
+217
60-150 secs.
+260(+0/-5)
30 secs. Max
6/sec. Max
8 min. Max
+260
FIG.1: tr × td pulse waveform
%IPP
100 Peak value
tr = rise time to peak value
td = decay time to half value
50 Half value
00 tr
t(μs)
td
FIG.3: Normalized Vs change vs. junction
temperature
Percent of Vs change(%)
12
8
4
25
0
-4
-8 Tj()
-40 -20 0 20 40 60 80 100 120 140
FIG.2: Reflow condition
TP
TL
TS(max)
Ramp-up
tp
tL
TS(min)
Preheat
ts
Critical Zone
TL to TP
Ramp-down
25 time to peak temperatue
(t 25to peak)
Time
FIG.4: Normalized DC holding current vs. case
temperature
IH(Tj)/IH(Tj=25)
2.0
1.8
1.6
1.4
1.2 25
1.0
0.8
0.6
0.4 TC()
-40 -20 0 20 40 60 80 100 120 140
TEL:+86-513-83639777
-3 / 4-
http://www.jjwdz.com

No Preview Available !

PxxxxEC Series
JieJie Microelectronics CO. , Ltd
PACKAGE MECHANICAL DATA 
K
D
LF
E
J
TO-92
Ref.
A
B
D
E
F
G
H
J
K
L
M
N
Dimensions
Millimeters
Inches
Min. Max. Min. Max.
4.32 5.33 0.170 0.210
12.70 15.00 0.500 0.591
2.41 2.67 0.095 0.105
- 4.3 - 0.169
1.16 1.37 0.046 0.054
3.18 4.19 0.125 0.165
2.04 2.66 0.080 0.105
4.45 5.20 0.175 0.205
2.04 2.66 0.080 0.105
0.41 0.53 0.016 0.021
0.36 0.50 0.014 0.020
- 1.52 - 0.060
 
Information furnished in this document is believed to be accurate and reliable.
However, Jiangsu JieJie Microelectronics Co.,Ltd assumes no responsibility for the
consequences of use without consideration for such information nor use beyond it.
Information mentioned in this document is subject to change without notice, apart
from that when an agreement is signed, Jiangsu JieJie complies with the agreement.
Products and information provided in this document have no infringement of patents.
Jiangsu JieJie assumes no responsibility for any infringement of other rights of third
parties which may result from the use of such products and information.
This document is the second version which is made in 5-Aug.-2017. This document
supersedes and replaces all information previously supplied.
is a registered trademark of Jiangsu JieJie Microelectronics Co.,Ltd.
Copyright©2017 Jiangsu JieJie Microelectronics Co.,Ltd. Printed All rights reserved.
TEL:+86-513-83639777
-4 / 4-
http://www.jjwdz.com