P0080BESA.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 P0080BESA 데이타시트 다운로드

No Preview Available !

JIEJIE MICROELECTRONICS CO. , Ltd
P0080BESA TSS
Rev.1
FEATURES: 
Low profile package.
Low on-state voltage.
Excellent capability of absorbing transient surge.
Quick response to surge voltage (ns Level).
Eliminates overvoltage caused by fast rising transients.
Moisture sensitivity level: Level 1.
Non degenerative.
 
1
SMA 
Symbol
 
2
ABSOLUTE MAXIMUM RATINGS (TA=25, RH=45%-75%, unless otherwise noted) 
Parameter
Storage temperature range
Operating junction temperature range
Repetitive peak pulse current
ESD rating per IEC61000-4-2:
Contact & Air
 
ELECTRICAL CHARACTERISTICS (TA=25)
Symbol
Value
TSTG
-60 to +150
TJ -40 to +125
IPP See surge ratings
Unit
A
±15 KV
Symbol
VDRM
IDRM
VS
IS
VT
IT
IH
CO
Parameter
Peak off-state voltage
Off-state current
Switching voltage
Switching current
On-state voltage
On-state current
Holding current
Off-state capacitance
VI Curve 
-V
+I
IIITSH
IDRM
VT
+V
VDRM VS
-I
TEL:+86-513-83639777
-1 / 5-
http://www.jjwdz.com

No Preview Available !

P0080BESA
MARKING 
JieJie Microelectronics CO. , Ltd
1409
P08BE
P08BE : Device Marking Code
1409: In ninth week, 2014
 
ELECTRICAL CHARACTERISTICS (TA=25, continued)
Part
Number
IDRM@VDRM
μA V
max
VS@IS
V mA
max max
VT@ IT
VA
max max
IH
mA
min
CO
pF
max
P0080BESA 1
7 12.5 800 4 2.2 30
Vs is measured at 100KV/s
Off-state capacitance is measured in VDC=2V,VRMS=1V, f=1MHz
110
Marking
P08BE
SURGE RATINGS
Series
2×10μs
B 250
 
ORDERING INFORMATION 
IPP(A) min
8×20μs
10×360μs
250 125
10×1000μs
80
 
 
 
 
 
 
 
 
TEL:+86-513-83639777
-2 / 5-
http://www.jjwdz.com

No Preview Available !

P0080BESA
JieJie Microelectronics CO. , Ltd
SOLDERING PARAMETERS 
Reflow Condition
Pre Heat
-Temperature Min (Ts(min))
-Temperature Max(Ts(max))
-Time (Min to Max) (ts)
Average ramp up rate (Liquidus Temp (TL)to peak)
Ts(max) to TL - Ramp-up Rate
Reflow
-Temperature(TL) (Liquidus)
-Temperature(tL)
Peak Temp (Tp)
Time within 5of actual Peak Temp (tp)
Ramp-down Rate
Time 25to Peak Temp (TP)
Do not exceed
Pb-Free assembly
(see FIG.2)
+150
+200
60-180 secs.
3/sec. Max
3/sec. Max
+217
60-150 secs.
+260(+0/-5)
30secs. Max
6/sec. Max
8 min. Max
+260
FIG.1: tr × td pulse waveform
%IPP
100 Peak value
tr = rise time to peak value
td = decay time to half value
50 Half value
00 tr
t(μs)
td
FIG.3: Normalized Vs change vs. junction
temperature
Percent of Vs change(%)
12
8
4
25
0
-4
-8 Tj()
-40 -20 0 20 40 60 80 100 120 140
FIG.2: Reflow condition
TP
TL
TS(max)
Ramp-up
tp
tL
TS(min)
Preheat
ts
Critical Zone
TL to TP
Ramp-down
25 time to peak temperatue
(t 25to peak)
Time
FIG.4: Normalized DC holding current vs. case
temperature
IH(Tj)/IH(Tj=25)
2.0
1.8
1.6
1.4
1.2 25
1.0
0.8
0.6
0.4 TC()
-40 -20 0 20 40 60 80 100 120 140
TEL:+86-513-83639777
-3 / 5-
http://www.jjwdz.com

No Preview Available !

P0080BESA
JieJie Microelectronics CO. , Ltd
PACKAGE MECHANICAL DATA 
B
DE
G
JK J
DO-214AC (SMA)
 
Dimensions
Ref. Millimeters
Inches
Min. Max. Min. Max.
A 2.60 3.00 0.102 0.118
B 4.15 4.65 0.163 0.183
C 1.25 1.65 0.049 0.065
D 0.95 1.52 0.037 0.060
E 4.90 5.30 0.193 0.209
F 0.051 0.203 0.002 0.008
G 0.15 0.31 0.006 0.012
H 2.00 2.44 0.079 0.096
J 2.00
0.079
K
2.30
0.091
L 1.80
0.071
 
TAPE AND REEL SPECIFICATIONSMA 
D0 P0 P2
Cathode
A0 P1
 
 
 
 
Dimensions
Ref.
Millimeters
Inches
A0 2.79 ± 0.3 0.110 ± 0.012
B0 5.33 ± 0.3 0.210 ± 0.012
C 330.0
13.0
D0 1.55 ± 0.1 0.061 ± 0.004
E 1.75 ± 0.2 0.069 ± 0.008
E1
13.3 ± 0.3
0.524± 0.012
F
5.5 ± 0.2
0.217 ± 0.008
P0 4.00 ± 0.2 0.157 ± 0.008
P1 4.00 ± 0.2 0.157 ± 0.008
P2 2.00 ± 0.2 0.079 ± 0.008
W
12.0± 0.2
0.472 ± 0.008
W1 15.7 ± 2.0 0.618 ± 0.079
OUTLINE
TAPING
UNIT WEIGHT
(g/PCS) typ.
0.066
REEL
(PCS)
5,000
PER CARTON
(PCS)
80,000
REEL DIAMETERS
(mm)
330
TEL:+86-513-83639777
-4 / 5-
http://www.jjwdz.com

No Preview Available !

P0080BESA
JieJie Microelectronics CO. , Ltd
Information furnished in this document is believed to be accurate and reliable.
However, Jiangsu JieJie Microelectronics Co.,Ltd assumes no responsibility for the
consequences of use without consideration for such information nor use beyond it.
Information mentioned in this document is subject to change without notice, apart
from that when an agreement is signed, Jiangsu JieJie complies with the agreement.
Products and information provided in this document have no infringement of patents.
Jiangsu JieJie assumes no responsibility for any infringement of other rights of third
parties which may result from the use of such products and information.
This document is the first version which is made in 6-Mar.-2017. This document
supersedes and replaces all information previously supplied.
is a registered trademark of Jiangsu JieJie Microelectronics Co.,Ltd.
Copyright ©2017 Jiangsu JieJie Microelectronics Co.,Ltd. Printed All rights reserved.
TEL:+86-513-83639777
-5 / 5-
http://www.jjwdz.com