G185XW01-V201.pdf 데이터시트 (총 29 페이지) - 파일 다운로드 G185XW01-V201 데이타시트 다운로드

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
G185XW01 V201
( V ) Preliminary Specification
( ) Final Specification
Module
Model Name
18.5” Color TFT-LCD
G185XW01 V201
Customer
Date
Approved by
Note: This Specification is subject to
change without notice.
Document version 0.0
Approved by
Date
Crystal Hsieh 2017/10/11
Prepared by
Athena Wu 2017/10/11
Desktop Display Business Group /
AU Optronics corporation
1

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
G185XW01 V201
Contents
1.0 Handling Precautions.............................................................4
2.0 General Description ...............................................................5
2.1 Display Characteristics....................................................................................................... 5
2.2 Optical Characteristics ....................................................................................................... 6
3.0 Functional Block Diagram ....................................................10
4.0 Absolute Maximum Ratings..................................................11
4.1 TFT LCD Module.............................................................................................................. 11
4.2 Absolute Ratings of Environment ..................................................................................... 11
5.0 Electrical characteristics ......................................................12
5.1 TFT LCD Module.............................................................................................................. 12
5.1.1 Power Specification ...................................................................................................... 12
5.1.2 Signal Electrical Characteristics.................................................................................... 13
5.2 Backlight Unit ................................................................................................................... 14
6.0 Signal Characteristic ............................................................15
6.1 Pixel Format Image.......................................................................................................... 15
6.2 The input data format....................................................................................................... 15
6.3 Signal Description ............................................................................................................ 16
6.4 Timing Characteristics...................................................................................................... 18
6.5 Timing diagram ................................................................................................................ 19
6.6 Power ON/OFF Sequence ............................................................................................... 20
7.0 Connector & Pin Assignment................................................21
7.1 TFT LCD Module.............................................................................................................. 21
7.2 LED Backlight Unit: LED Driver Connector ...................................................................... 21
7.3 LED Driver Connector Pin Assignment ............................................................................ 22
8.0 Reliability Test .....................................................................23
9.0 Shipping Label & Packaging.................................................24
9.1 Shipping Label ................................................................................................................. 24
9.2 Packaging ........................................................................................................................ 25
9.3 Palletizing......................................................................................................................... 26
10.0 Mechanical Characteristics.................................................27
11 Safety ...................................................................................29
11.1 Sharp Edge Requirements ............................................................................................. 29
11.2 Materials......................................................................................................................... 29
11.3 Capacitors ...................................................................................................................... 29
11.4 National Test Lab Requirement ...................................................................................... 29
Document version 0.0
2

No Preview Available !

Version & Date
0.0 2017/10/11
Page
All
Product Specification
AU OPTRONICS CORPORATION
Record of Revision
G185XW01 V201
Old description
New Description
Preliminary spec
Document version 0.0
3

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
G185XW01 V201
1.0 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when
handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after it was taken out from the
container, do not press the center of LED lightbar edge. Instead, press at the far ends of the LED light
bar edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module even
momentarily. While designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module may
be damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The LCD module
should be supplied by power complied with requirements of Limited Power Source (IEC60950-1 or
UL1950-1), or be applied exemption.
Document version 0.0
4

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
G185XW01 V2
2.0 General Description
This specification applies to the 18.5 inch-wide Color a-Si TFT-LCD Module G185XW01 V201.The
display supports the WXGA [1366(H) x 768(V)] screen format and 16.7M colors (RGB 6-bits + Hi-FRC
data). All input signals are LVDS interface comaptible.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25oC condition:
ITEMS
Screen Diagonal
Active Area
Pixels H x V
Pixel Pitch
Pixel Arrangement
Display Mode
White Luminance ( Center )
Contrast Ratio
Optical Response Time
Nominal Input Voltage VDD
Power Consumption
(VDD line + LED line)
Weight
Physical Size
Electrical Interface
Support Color
Surface Treatment
RoHS Compliance
Temperature Range
Operating
Storage (Shipping)
Unit
[mm]
[mm]
[um]
[cd/m2]
[msec]
[Volt]
[Watt]
[Grams]
[mm]
[oC]
[oC]
SPECIFICATIONS
470.1(18.51”)
409.8 (H) x 230.4 (V)
1366(x3) x 768
300 (per one triad) × 300
R.G.B. Vertical Stripe
TN Mode, Normally White
450 cd/m2 (Typ.)
1000 (Typ.)
5ms (Typ., on/off)
+5.0 V (Typ)
13.5W (Typ.) (Pdd=4.5W, PLED=9W)
1440 (Max)
430.4 (W) x 254.7 (H) Typ. x 10.6 (D)Typ
One channel LVDS
16.7M colors, RGB 6-bit +Hi- FRC
Anti-Glare, 3H
RoHS Compliance
0 to +60(+60 as panel surface temperature)
-20 to +60
Document version 0.0
5