P0300SC.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 P0300SC 데이타시트 다운로드

No Preview Available !

TSS-SC
Thyristor Surge Suppresser
DESCRIPTION
DO-214AA/SMB Thyristor solid state protection thyristor protect telecommunications equipment such as modems,
line cards,fax machines,and other CPE.This Series devices are used to enable equipment to meet various regulato-
ry requirements including GR1089,ITUK.20,K.21 and K.45,IEC 60950,and TIA-968(formerly known as FCC Part 68).
FEATURES
> Excellent capability of absorbing transient surge
> Quick response to surge voltage
> Eliminates overvoltage caused by fast rising transients
> Solid-state silicon technology, non degenerative
APPLICATIONS
> Audio/Video line
> Network and telecom
> Data lines and security systems
> Serial ports
PART NUMBER AND ELECTRICAL PARAMETER @ T=25RH = 45%-75%
PART
VDRM
IDRM
VS
IS
VT
NUMBER
V
uA
V
mA
V
Min.
Max.
Max.
Max.
IT
A
DO-214AA PACKAGE
12
SCHEMATIC SYMBOL
IH CO
mA pF
Max.
P0080SC
6
5 25
P0300SC
25
5
40
P0640SC
58
5
77
P1800SC
170
5
220
P2300SC
190
5
260
P2600SC
220
5
300
P3100SC
275
5
350
P3500SC
320
5
400
P4200SC
390
5
500
1Vs is measured at 100KV/S
2Off-state capacitance is measured in VDC=2V,VRMS=1V,F=1MHz
3All measurements are made at an ambient temperature of 25
800
800
800
800
800
800
800
800
800
4
4
4
4
4
4
4
4
4
SURGE RATINGS
Series
IPP
2x10us
(A)
P0080SC
Thru
P4200SC
500
IPP
8x20us
(A)
400
IPP
10x560us
(A)
150
IPP
10x1000us
(A)
100
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
VPP
10x700us
(V)
6000
50
50
150
150
150
150
150
150
50
ITSM
60Hz
(A)
30
80
80
80
80
80
80
40
40
70
di/dt
(A/us)
500
Document Number: 151004
Page 1
www.semiware.com.cn

No Preview Available !

THERMAL CONSIDERATIONS
Symbol
TJ
TS
RθJA
Parameter
OperaƟng JuncƟon Temperature
Storage Temperature Range
JuncƟon to Ambient on printed circuit
TYPICAL DEVICE CHARACTERISTICS
+I
IT
IS
IH
IDRM
-V
+V
VT VDRM
VS
-I
V-I Characteristics
TSS-SC
Thyristor Surge Suppresser
Value
-40 to +150
-40 to +150
90
Unit
℃/W
tr = rise Ɵme to peak value
Peak
td = decay Ɵme to half value
100 Value
Wave form = tr x t d
50 Half Value
0
tr
0
td
t – Time (μs)
tr x td Pulse Waveform
14
12
10
8
6
4
2
0
-4
-6
-8
-40 -20
25 °C
0 20 40 60 80 100 120 140 16 0
JuncƟon Temperature (TJ) – °C
Normalized VS Change vs. Junction Temperature
2.0
1. 8
1. 6
1. 4
25 °C
1. 2
1. 0
0.8
0.6
0.4
-40 -20 0 20 40 60 80 1 00 120 1 40 160
Case Temperature (TC) - °C
Normalized DC Holding Current vs. Case Temperature
Document Number: 151004
Page 2
www.semiware.com.cn

No Preview Available !

ENVIRONMENTAL CHARACTERISTICS
TesƟng Items
High Temperature Reverse Bias Test
High Temperature Life Test
High-Low Temperature Cycle Test
High Temperature&High Humidity Test
Pressure Cooker Test
Resistance Of Soldering Heat
PRODUCT DIMENSIONS
TSS-SC
Thyristor Surge Suppresser
Technical Standards
Temperature:150±3,Bias=80%VDRM ;Time:168H
Temperature:150;Time:168H
Temperature:From -40to 150;Dwell Time:30min,10-100 Cycles
Temperature:85.Humidity:85%; Time:168H
Temperature:121,2 atm.Humidity:100%; Time:24H To 168H
Temperature:260±5;Time Of Dip Soldering:10s,3 Times
SMB PACKAGE DIMENSIONS
B
H
AC
D
A 1.96
B 4.35
C 3.30
D 2.20
E 0.76
F 0.02
G 5.08
H 0.15
2.20 0.077
4.85 0.171
3.94 01. 30
2.50 0.087
1.52 0.030
0.20 0.001
5.59 0.200
0.30 0.006
EF
G
NOTES:
1.Dimensions are exclusive of mold flash and metal burrs
2.Cathode Band is only applicable to the unidirecƟonal package
RECOMMENDED PAD LAYOUT DIMENSIONS
E
A
B CD
A
B
C
D
E
RECOMMENDED PAD LAYOUT DIMENSIONS
2.20 - 0.087
1.45 - 0.057
- 2.55 -
1.45 - 0.057
0.087
0.191
0.155
0.098
0.060
0.008
0.220
0.012
-
-
0.100
-
Document Number: 151004
Page 3
www.semiware.com.cn

No Preview Available !

SOLDERING PARAMETERS
Reflow CondiƟon
Temperature Min (Ts(min))
Pre Heat Temperature Max (Ts(max)
Time (min to max) (ts)
Average ramp up rate (Liquidus Temp (TL) to peak
TS(max)to TL - Ramp-up Rate
Reflow
Temperature (TL) (Liquidus)
Time (min to max) (ts)
Peak Temperature (TP)
Time within 5°C of actual peak Temperature (tp)
Ramp-down Rate
Time 25°C to peak Temperature (TP)
Do not exceed
TAPE AND REEL SPECIFICATION
Lead–free assembly
150°C
200°C
60 – 180 secs
3°C/second max
3°C/second max
217°C
60 – 150 seconds
260°C
20 – 40 seconds
6°C/second max
8 minutes Max.
260°C
tD
TSS-SC
Thyristor Surge Suppresser
10 Pitches CumulaƟve
P0 Tolerance on tape ± 0.2
E
F
W
K0
B0
A0 P
User DirecƟon of Feed
REEL DIA.
330mm (13”)
TA P E
WIDTH
12mm
S P E C I F I C AT I O N S
A0 B0 K0
D
E
F W P0 P tmax
3.79 ± 0.15 5.72 ± 0.15 2.46 ± 0.30 1.55 ± 0.05 1.75 ± 0.10 5.5 ± 0.05 12.00 ± 0.30 4.00 ± 0.10 8.00 ± 0.10 0.25 ± 0.10
NOTES
1. Dimensions are in millimeters.
2. Surface mount product is taped and reeled in accordance with EIA-481.
3. Suffix - T = 13” Reel - 3,000 pieces per 12mm tape.
ORDERING INFORMATION
Part Number
PxxxxSC
Component Package
DO-214AA
Q T Y/ Re e l
3000PCS
Reel Size
13"
Document Number: 151004
Page 4
www.semiware.com.cn

No Preview Available !

TSS-SC
Thyristor Surge Suppresser
CONTACT US
Headquarters
A Building Caohejing I&E Park Pujiang Minhang Shanghai
China
Hotline
400-021-5756
Web
http://www.semiware.com.cn
By Telephone
Sales: 86-21-3463-7345
Customer Service: 86-21-3463-7172-8810/8826
Technical Support: 86-21-3463-7173-8811
By Email
Sales: sales03@semiware.com.cn
Customer Service: sales17@semiware.com.cn
Technical Support: fae03@semiware.com.cn
By Fax
General: 86-21-3965-0654
Sales:86-21-3463-7458
COPYRIGHT ©Semiware 2009 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: Semiware reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES : Semiware reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assi-
stance. Semiware assumes no responsibility with respect to the selection or specifications of such products.Semiware makes no warranty,representation or guarantee regarding the suitability of its products for any particular pu-
rpose, nor does Semiware assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,consequential or incidental damages.
LIFE SUPPORT POLICY: Semiware products are not authorized for use in life support systems without written consent from the factory.
Document Number: 151004
Page 5
www.semiware.com.cn