CL0608.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 CL0608 데이타시트 다운로드

No Preview Available !

Technical Data 10578
Effective December 2016
CL0608
Multi-phase power inductors
Product features
High current multi-phase inductor
100 nH per phase coupled inductor
10.8 mm x 6.35 mm footprint surface mount
package in an 8.2 mm height
Ferrite core material
Moisture Sensitivity Level (MSL): 1
Applications
For exclusive use with Maxim® Multi-phase
controllers
Voltage Regulator Modules (VRMs) and high
power density VRMs
Server and desktop
Central processing unit (CPU)
Graphics processing unit (GPU)
Application specific integrated circuit (ASIC)
Data networking and storage systems
High current Point-of-Load (POL) modules
Vcore regulators
Environmental data
Storage temperature range (Component):
-40 °C to +125 °C
Operating temperature range: -40 °C to +125 °C
(ambient plus self-temperature rise)
Solder reflow temperature:
J-STD-020 (latest revision) compliant
Halogen free, lead free, RoHS compliant
Pb HFHALOGEN
FREE
Maxim® is a registered trademark of Maxim Integrated Devices, Inc.

No Preview Available !

Technical Data 10578
Effective December 2016
CL0608
Multi-phase power inductors

Product specifications
Part Number5
CL0608- 2- 100TR-R
Inductor
Phases
2
OCL1
(nH) ±20%
380
FLL2
(nH) minimum
300
Isat12
(A)
15
DCR (mΩ)
±10%
@ 20 °C
0.89
SCL3
(nH) ±20%
100
Isat24
(A)
38
1. Open Circuit Inductance (OCL) Test Parameters: 1.0 MHz, 0.1 Vrms, 0.0 Adc, +25 °C
2. Full Load Inductance (FLL) Test Parameters: 1.0 MHz, 0.1 Vrms, Isat1, +25 °C
3. Short Circuit Inductance (SCL) Test Parameters: 1.0 MHz, 0.1 Vrms, 0.0 Adc, +25 °C
CL0608-2-100TR-R short (1 & 4), measure (2 & 3), and divide by 2.
4. Isat2: Peak current where SCL drops approximately 20% @ +25 °C
8. Part Number Definition: CL0608-x-100TR-R
CL0608 = Product code and size
x = Number of phases
100 = Inductance value per phase in nH
TR = Tape and reel packaging
-R suffix = RoHS compliant
Note: This device is licensed for use only when incorporated within a voltage regulator
employing power regulating devices manufactured by Maxim Integrated Devices, Inc.
No license is granted expressly or by implication to use this device with power
regulating devices manufactured by any company other than Maxim.
Dimensions (mm)
Part marking: CL0608-x-100TR-R (x = number of phases), xxxx = lot code
Tolerances are ±0.25 millimeters unless stated otherwise
All soldering surfaces to be coplanar within 0.13 millimeters
PCB tolerances are ±0.1 millimeters unless stated otherwise
DCR measured from point “a” to point “b”
Do not route traces or vias underneath the inductor
Packaging information (mm)
Supplied in tape and reel packaging , 500 parts per 13” diameter reel
Drawing not to scale
2 www.eaton.com/electronics

No Preview Available !

CL0608
Multi-phase power inductors

Inductance characteristics – SCL vs. current
120
CL0608-2-100TR-R
Technical Data 10578
Effective December 2016
100
80
60
40
20
0
0
+25 °C
+105 °C
+125 °C
5 10 15 20 25 30 35 40 45 50
Idc (A)
Inductance characteristics – OCL vs. current
CL0608-2-100TR-R
450
400
350
300
250
200
150
+25 °C
100 +105 °C
50 +125 °C
0
0 2 4 6 8 10 12 14 16 18 20 22 24
Idc (A)
www.eaton.com/electronics
3

No Preview Available !

Technical Data 10578
Effective December 2016
Solder reflow profile
TP
TL
Tsmax
Tsmin
Max. Ramp Up Rate = 3°C/s
Max. Ramp Down Rate = 6°C/s
Preheat
A
ts
25°C
Time 25°C to Peak
Time
CL0608
Multi-phase power inductors

tP
t
TC -5°C
Table 1 - Standard SnPb Solder (Tc)
Package
Thickness
Volume
mm3
<350
Volume
mm3
350
<2.5mm)
235 °C
220 °C
2.5mm
220 °C
220 °C
Table 2 - Lead (Pb) Free Solder (Tc)
Package
Thickness
Volume
mm3
<350
Volume
mm3
350 - 2000
<1.6mm
260 °C
260 °C
1.6 – 2.5mm
260 °C
250 °C
>2.5mm
250 °C
245 °C
Volume
mm3
>2000
260 °C
245 °C
245 °C
Reference JDEC J-STD-020
Profile Feature
Preheat and Soak • Temperature min. (Tsmin)
• Temperature max. (Tsmax)
• Time (Tsmin to Tsmax) (ts)
Average ramp up rate Tsmax to Tp
Liquidous temperature (Tl)
Time at liquidous (tL)
Peak package body temperature (TP)*
Time (tp)** within 5 °C of the specified classification temperature (Tc)
Average ramp-down rate (Tp to Tsmax)
Time 25 °C to Peak Temperature
* Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum.
** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum.
Standard SnPb Solder
100 °C
150 °C
60-120 Seconds
3 °C/ Second Max.
183°C
60-150 Seconds
Table 1
20 Seconds**
6 °C/ Second Max.
6 Minutes Max.
Lead (Pb) Free Solder
150 °C
200 °C
60-120 Seconds
3 °C/ Second Max.
217°C
60-150 Seconds
Table 2
30 Seconds**
6 °C/ Second Max.
8 Minutes Max.
Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written
approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly
used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also
reserves the right to change or update, without notice, any technical information contained in this bulletin.
Eaton
Electronics Division
1000 Eaton Boulevard
Cleveland, OH 44122
United States
www.eaton.com/electronics
© 2016 Eaton
All Rights Reserved
Printed in USA
Publication No. 10578 BU-MC16092
December 2016
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.