2 x 1.2mm Auto Grade Tuning Fork
• TAPE SPECIFICATIONS (millimeters)
A B C D E F Reel QTY
Ø1.5 4.0 4.0 3.5 8.0 0.75 -T3 = 3,000
• REEL SPECIFICATIONS (millimeters)
GH I JKLM
2.0 Ø13 Ø21 Ø60 Ø180 9.0 1.2
Available Options & Part Identification for SMD Tuning Fork Crystal K12A
F K12A E I H I 0.032768
F K12A E
E = ±20ppm
I =-0.04 PPM /
I = -40 ~ +125 °C
5570 Enterprise Parkway
Fort Myers, FL 33905
1-888-GET-2-FOX (1-888-438-2369) or
PRODUCT USE: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole discretion.
All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the
operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer
products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the
suitability of Fox Electronics' products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of
others. This document is presented only as a guide and does not convey any license under intellectual property rights of Fox Electronics or any third parties.
Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the
failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or safety of users. Anyone using a Fox Electronics
product in such a manner does so at their own risk, absent an express, written agreement by Fox Electronics.
Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice. Other trademarks and
service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their respective third party owners.
For datasheet type definitions and a glossary of common terms, visit http://www.foxonline.com/tgcrystals.html
© Copyright 2019 Fox Electronics. All rights reserved
Title / Description: K12A STANDARD SPECIFICATIONS
Drawing Number: 101166
Revision Date: 05/21/2019
2 of 3