W0625AB001G.pdf 데이터시트 (총 11 페이지) - 파일 다운로드 W0625AB001G 데이타시트 다운로드

No Preview Available !

产品规格书
PRODUCT SPECIFICATION
客户名称Buyer Name
客户料号Buyer Part No.
客户承认签章
Buyers Approval & Signatures
文件编号Spec No.
品名描述
Product Description
型号Part No.
送样日期Date
设计Designed by
S-325889
版本
BLDC Coin Vibration Motor
A/0
W0625AB001G
审核Checked by
批准Approved by
2019.2.19
2019.2.19
2019.2.19
Jinlong Machinery & Electronics
www.jinlong-machinery.com
sales@jinlong-machinery.com

No Preview Available !

NO ITEM
1 Revision History
2 Application
3 Standard Operating Condition
4 Standard Measurement Condition
5 Judgment Environmental Condition
6 Test Tolerance
7 Electrical Characteristics
8 Mechanical Characteristics
9 Graph Characteristic Graph
10 Reliability Test
11 Caution
12 Specification Change
13 Drawing
Page
2 / 12
Page
3
4
4
4
5
5
5
6
6
7~8
9
10
11
Part Number
Specification
Φ6 x 2.5T
Company
Name of applied
Model
W0625AB001G
Approval No.
Enactment
Revision
S-325889
2019.2.19

No Preview Available !

1. REVISION HISTORY
REV No.
Date
Page
3 / 12
Description
Inspector
Designed Approved
Part Number
Specification
Φ6 x 2.5T
Company
Name of applied
Model
W0625AB001G
Approval No.
Enactment
Revision
S-325889
2019.2.19

No Preview Available !

2. Scope
This specification is applies to W0625AB001G vibration motors to be
used for mobile telephone or IT devices.
3. Contents
Page
4 / 12
No. Item
3-1 Operating Voltage Range
3-2 Storage Temperature
Range
3-3 Operating
Temperature Range
3-4 Operating Position
Specification
DC 2.7V ~ 3.3V
(-)40 ~ (+)85℃
There should be no condensation
(-)20 ~ (+)60℃
There should be no condensation
All Direction
4. Standard Test Condition
No. Item
4-1 Temperature
4-2 Humidity
4-3 Measurement Voltage
4-4
Specification
20±3℃
65%±20% RH
DC3.0V
Standard Measurement State
Inspection Circuit Diagram
- Jig : 50x46x45mm [Material is POM]
- Weight: 150g
- The vibrator is Clamped firmly (0.5~1Kg pressure) on a test fixture
Part Number
Specification
Φ6 x 2.5T
Company
Name of applied
Model
W0625AB001G
Approval No.
Enactment
Revision
S-325889
2019.2.19

No Preview Available !

5. Judgment Environmental Condition
NO Item
5-1 Temperature
Page
Condition
20±3℃
5-2 Humidity
65%±20%RH
6.Test Tolerance
Test set-ups and equipment shall be capable of maintaining following condition,
unless otherwise specified.
NO Item
6-1 Room Temperature & Humidity
6-2 Test Chamber Temperature
6-3 Voltage
7.Electrical Characteristics
Condition
20±15℃/65±20%RH
Limits ±3℃
Limits ±0.15V
5 / 12
No Item
7-1 Rated Voltage
7-2 Rotating Direction
7-3 Rated Load Speed
7-4 Rated Load Current
7-5 Starting Current
7-6 Starting Voltage
Test Condition
CW [Lead Wire Red(+), Black or
Blue(-)
CW [Lead Wire Red to (+), Black
or Blue to (-)
It is based on the standard
measurement condition of the
section 4.
Test based on the standard
measurement condition of the
section 4-1, 4-2, and 4-4.
Condition
DC 3.0V
CW
15,000 ± 3,000
rpm
90 ㎃ max
175 ㎃ max
DC 2.5 V max
7-8 Insulation Voltage
Measured between terminal and
case with DC100V Megger.
10 ㏁ min
Part Number
Specification
Φ6 x 2.5T
Company
Name of applied
Model
W0625AB001D
Approval No.
Enactment
Revision
S-325889
2019.2.19