S469-03FR.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 S469-03FR 데이타시트 다운로드

No Preview Available !

SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATASHEET 6008, REV. -
S469-01FR
S469-02FR
S469-03FR
SINGLE PHASE FAST FULL WAVE
BRIDGE RECTIFIER ASSEMBLY
DESCRIPTION: A 10A, 5000 NANOSECOND SINGLE PHASE FAST BRIDGE RECTIFIER ASSEMBLY.
AVAILABLE IN 200V, 400V, 600V.
FEATURE: A Dielectric Withstanding Voltage test will be performed with the metal case of the assembly
connected to ground and all four terminals connected to the high potential side of a DC power supply or scope
display test. Voltage applied shall be 2800 Vdc and held for 10 seconds.
MAX. RATINGS / ELECTRICAL CHARACTERISTICS All ratings are at TA = 25oC unless otherwise specified.
RATING
CONDITIONS MIN TYP MAX
UNIT
Peak Inverse Voltage (PIV)
S469-01FR
-
- 200
S469-02FR
400
S469-03FR
600
Average DC Output
TC = 55 oC
- - 9.0
Current (TC = Case Temp)
TC = 100 oC
5.0
(Io) TC = 125 oC
2.5
Vdc
Amps
Peak Single Cycle Surge
Current (IFSM)
Rated at TA = 55oC
Maximum Forward Voltage
Per Leg (Vf)
Maximum Instantaneous
Reverse Current At Rated
(PIV)
tp = 8.3 ms Single
Half Cycle Sine
Wave
If = 9 A dc
(300 sec pulse,
duty cycle < 2%)
TA = 25C
TA = 100C
-
-
-
- 80 Amps(pk)
- 1.5
-2
50
Volts
Amps
Reverse Recovery Time
(trr)
Thermal response
If = 0.5A, Ir = 1.0A,
Irr = 0.25A
RJC
-
-
- 500
- 2.0
nsec
oC/W
Maximum operating and
storage temperature range
TJ, stg
-55
+150
C
©2018 Sensitron Semiconductor Ph (631) 586 7600 Fx (631) 242 9798 www.sensitron.com sales@sensitron.com

No Preview Available !

SENSITRON
TECHNICAL DATA
DATASHEET 6008, REV. -
MECHANICAL DIMENSIONS: In Inches / mm
.149 (3.78 Dia.
.139 3.53)
.076 (1.93
.066 1.68)
.101 (2.57
.091 2.31)
.098 (2.49
.088 2.24)
.750 (19.05
.735 18.67)
Square
.375
.367
(9.53
9.32)
Typ.
.225
.175
(5.72
4.45)
AC
AC +
.450 (11.43
.350 8.89)
.225 (5.72
.175 4.45)
.450 (11.43
.350 8.89)
AC
AC
+
.030 (.76
.020 .51)
.570 (14.48) max
.370 (9.40) max
Fig. 469
Note: Case finish - Black Anodized
S469-01FR
S469-02FR
S469-03FR
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve
product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest
version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations
©2018 Sensitron Semiconductor Ph (631) 586 7600 Fx (631) 242 9798 www.sensitron.com sales@sensitron.com