SMPA1304-011LF.pdf 데이터시트 (총 6 페이지) - 파일 다운로드 SMPA1304-011LF 데이타시트 다운로드

No Preview Available !

DATA SHEET
SMPA1304-011LF: Low Distortion Attenuator Plastic
Packaged PIN Diode
Automotive Applications
Infotainment
Navigation
Telematics
Garage door openers
Wireless control systems
Features
AEC-Q101 qualified
Designed for low distortion attenuator applications
Frequency range from 5 MHz to >2 GHz
Package rated MSL1 @ 260 C per JEDEC J-STD-020
Skyworks GreenTM products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of GreenTM, document number
SQ04–0074.
Description
The SMPA1304-011LF plastic packaged, surface mountable,
low capacitance (0.3 pF) silicon PIN diode is designed for
attenuator applications from 5 MHz to beyond 2 GHz.
The thick 100 μm I region of this PIN diode makes this device very
attractive for use in low distortion attenuators in vehicle
infotainment applications.
The 1 μs typical carrier lifetime of this diode results in a
resistance of 20 Ω maximum at 1 mA and 7 Ω maximum at
10 mA.
Table 1 describes the SMPA1304-011LF package and marking.
Table 1. Package and Marking
Single
SOD-323
Green™
SMPA1304-011LF
Marking: RG
LS = 1.5 nH
The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHS-
compliant package unless otherwise noted as Green™. Tin/lead (Sn/Pb)
packaging is not recommended for new designs.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203193B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 22, 2018
1

No Preview Available !

DATA SHEET • SMPA1304-011LF: LOW-DISTORTION ATTENUATOR PLASTIC PACKAGED PIN DIODE
Electrical and Mechanical Specifications
The absolute maximum ratings of the SMPA1304-011LF are
provided in Table 2. Electrical specifications are provided in
Table 3.
Resistance versus temperature measurements are provided in
Table 4. Typical performance characteristics of the SMPA1304-
011LF are illustrated in Figures 1 to 4.
Table 2. SMPA1304-011LF Absolute Maximum Ratings1
Parameter
Symbol
Minimum
Maximum
Units
Reverse voltage
VR 200 V
Power dissipation @ 25 °C lead temperature
PD
250 mW
Storage temperature
TSTG
-65 +150
C
Operating temperature
TA
-65 +150
C
Electrostatic discharge:
ESD
Human Body Model (HBM), Class 1C
2000 V
1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters
set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection.
Industry-standard ESD handling precautions should be used at all times.
Table 3. SMPA1304-011LF Electrical Specifications1
(TA = +25 C, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Reverse current
IR VR = 200 V
Capacitance
CT f = 1 MHz, V = 30 V
f = 100 MHz
Resistance
RS I = 1 mA
I = 10 mA
I = 100 mA
Forward voltage
VF IF = 10 mA
Carrier lifetime
Tl IF = 10 mA
I region width
1 Performance is guaranteed only under the conditions listed in this table.
Typical
40
0.8
1
100
Maximum
10
0.3
50
7
2
Units
μA
pF
Ω
Ω
Ω
V
μs
μm
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2 June 22, 2018 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203193B

No Preview Available !

DATA SHEET • SMPA1304-011LF: LOW-DISTORTION ATTENUATOR PLASTIC PACKAGED PIN DIODE
Table 4. Resistance vs Temperature @ 100 MHz
IF RS @ –55 °C
(mA) (Ω)
0.02 1590
0.10 315
0.30 108
1.0 34.5
10 4.8
20 3.0
100 1.3
RS @ –15 °C
(Ω)
1660
340
118
37.9
5.3
3.3
1.4
RS @ +25 °C
(Ω)
1752
367
128
41.6
5.8
3.6
1.5
RS @ +65 °C
(Ω)
1770
396
141
46.3
6.6
4.1
1.7
RS @ +100 °C
(Ω)
1760
409
147
48.8
7.0
4.3
1.8
Typical Performance Characteristics
10000
1000
100
10
1
0.1
0.01
0.1 1
10
Forward Current (mA)
100
Figure 1. Series Resistance vs Current @ 100 MHz
0.8
0.7
0.6
0.5
0.4
1 MHz
0.3
0.2
100 MHz
0.1
0
01
1 GHz
2 5 10 20
Reverse Voltage (V)
50
100
Figure 3. Capacitance vs Reverse Voltage
100
10
1
0.1
0.01
400 500 600 700 800 900 1000
Forward Voltage (mV)
Figure 2. DC Characteristic
400
350
300
250
200
150
100
50
0
0
0V
10 V
40 V
500 1000 1500
Frequency (MHz)
2000
Figure 4. Conductance vs Frequency and Reverse Voltage
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203193B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 22, 2018
3

No Preview Available !

DATA SHEET • SMPA1304-011LF: LOW-DISTORTION ATTENUATOR PLASTIC PACKAGED PIN DIODE
Package Dimensions
Package dimensions are shown in Figure 5, and tape and reel
dimensions are provided in Figure 6.
Package and Handling Information
Instructions on the shipping container label regarding exposure
to moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SMPA1304-011LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application
Note, Solder Reflow Information, document number 200164
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
0.060 (1.52 mm) Min.
0.070 (1.78 mm) Max.
0.090 (2.29 mm) Min.
0.107 (2.72 mm) Max.
0.000 (0 mm) Min.
0.004 (0.10 mm) Max.
0.044
(1.12 mm) Min.
0.054
(1.37 mm) Max.
1
Cathode
Indicator
0.013
2
(0.33 mm) Min.
0.017
(0.43 mm) Max.
0.012 (0.305 mm) Min.
0.016 (0.406 mm) Max.
0.036 (0.91 mm) Min.
0.046 (1.17 mm) Max.
0.025
(0.635 mm) Min.
0.037
(0.940 mm) Max.
0.005 (0.127 mm) Min.
0.008 (0.203 mm) Max.
0.008 Ref.
Gauge Datum
For Foot Length
Measurement
0.010 (0.25 mm) Min.
0.018 (0.46 mm) Max.
Dimensions are in inches (millimeters shown in parentheses)
S1619
Figure 5. SOD-323 Package Dimension Drawing
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4 June 22, 2018 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203193B

No Preview Available !

Cathode
Indicator
DATA SHEET • SMPA1304-011LF: LOW-DISTORTION ATTENUATOR PLASTIC PACKAGED PIN DIODE
4.00 ± 0.10
2.00 ± 0.05
1.75 ± 0.10
1.50 +0.1/–0
AA
B
4.00 ± 0.10
0.84
8° Max
B
1.05 ± 0.05
1.25 ± 0.05
1.02
1.46 ± 0.10
A
Notes:
1. Carrier tape: black conductive polycarbonate or polystyrene.
2. Cover tape: transparent conductive material.
3. Cover tape size: 5.5 mm width.
4. ESD surface resistivity is ≥1 x 105 ~ ≤ 1 x 1011 Ohms/square.
5. 10 sprocket hole pitch cumulative tolerance: ±0.20 mm.
6. Ao and Bo measured on plane 0.30 mm above bottom of the pocket.
7. All measurements are in millimeters.
8. Standard reel size is 7 inches. Standard reel quantity is 3000 pcs.
5° Max
B
S2061
Figure 6. SOD-323 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203193B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 22, 2018
5