C052H.pdf 데이터시트 (총 13 페이지) - 파일 다운로드 C052H 데이타시트 다운로드

No Preview Available !

Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric,
50 – 200 VDC (Industrial Grade)
Overview
KEMET’s High Temperature 200ºC epoxy molded radial
through-hole ceramic capacitors in C0G dielectric features
a robust and proprietary base metal dielectric system
that offers industry-leading performance in extreme high
pressure and high temperature environments up to 200°C.
These capacitors are designed specifically to withstand
the severe shock and vibration conditions associated
with deep-well and horizontal drilling activities and are
well suited for use in aerospace engine compartments,
geophysical probes, hybrid and electric automotive motor
drives and defense applications.
As high temperature electronic module complexity
increases, the size reduction of components becomes
more and more critical. These devices are significantly
smaller by volume than most competitor radial molded
capacitors, allowing for downsizing and replacement
opportunities of larger high temperature precious metal
electrode (PME) and base metal electrode (BME) dielectric
system devices. They feature gold-plated lead wires for
temperature resistance and an epoxy molded case for
environmental protection and mechanical durability.
With virtually no capacitance change at 200°C and rated
voltage applied, these radial molded capacitors in C0G
dielectric are temperature compensating and are suited
for resonant circuit applications or those where Q and
stability of capacitance characteristics are required. They
exhibit no change in capacitance with respect to time and
voltage and boast a negligible change in capacitance with
reference to ambient temperature. Capacitance change is
limited to ±30ppm/ºC from −55°C to +200°C. In addition,
these capacitors exhibit high insulation resistance with low
dissipation factor at elevated temperatures up to 200°C, as
well as low ESR at high frequencies.
Ordering Information
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
C 052
H
272
F
2G
5
GA
7301
Ceramic
Style/
Size
Specification/
Series
Capacitance
Code (pF)
Capacitance
Tolerance1
Rated
Voltage Dielectric
(VDC)
Design
Lead Failure
Finish2 Rate
Packaging
C-Spec3
052 H = Two significant digits B = ±0.1 pF 5 = 50
062 High Temp and number of zeros C = ±0.25 pF 1 = 100
200ºC Use 9 for 1.0 – 9.9 pF D = ±0.5 pF 2 = 200
ex. 2.2 pF = 229 F = ±1%
G = ±2%
J = ±5%
K = ±10%
G= 5=
G = A = Blank = Bulk Bag
C0G Multilayer Gold (Au) N/A T250 = 250 pcs/
12" Reel
T500 = 500 pcs/
12" Reel
T1K0 = 1,000 pcs/
12" Reel
7301 = Full Reel Qty/
12" Reel
7303 = Full Reel Qty/
12" Reel
7061 = Bulk Tray
1 Additional capacitance tolerance offerings may be available. Contact KEMET for details.
2 Wire lead materials and finishes: Alternative lead materials and finishes may be available. Contact KEMET for details.
3 Default packaging for this product series is "Bulk Bag". KEMET will assume "Bulk Bag" packaging is required when the 15th thru 18th character
positions are left blank.
3 C-Spec 7301 can only be used when ordering 052 style/size.
3 C-Spec 7303 can only be used when ordering 062 style/size.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016 1

No Preview Available !

Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Dimensions – Inches (Millimeters)
C052H
L
T
C062H
L
T
0.045
(1.143)
Maximum
H
H
LL
LD
S
Series
S
Lead Spacing
C052H
C062H
0.20±0.015
(5.08±0.38)
LD
S
LL
L
Length
0.19±0.01
(4.83±0.25)
0.29±0.01
(7.37±0.25)
H
Height
0.19±0.01
(4.83±0.25)
0.29±0.01
(7.37±0.25)
T
Thickness
0.09±0.01
(2.29±0.25)
0.09±0.01
(2.29±0.25)
LD
Lead Diameter
LL
Lead Length
Minimum
0.025+0.004/−0.002
(0.635+0.102/−0.051)
1.25 (31.75)
Benefits
• Operating temperature range of −55°C to +200°C
• High shock and vibration capability
• Base Metal Electrode (BME) dielectric system
• RoHS and REACH compliant
• Radial through-hole form factor
• Gold (Au) plated wire lead finish
• Military designation styles CK/CKR05 and CK/CKR06
• Molded case
• High breakdown voltage strength
• DC voltage ratings of 50 V, 100 V and 200 V
• Capacitance offerings ranging from 1.0 pF up to 0.22 μF
• Available capacitance tolerances of ±0.1 pF, ±0.25 pF, ±0.5
pF, ±1%, ±2%, ±5%, and ±10%
• Extremely low ESR and ESL
• High thermal stability
• High ripple current capability
• No capacitance change with respect to applied rated DC
voltage
• Negligible capacitance change with respect to temperature
from −55°C to +200°C
• No capacitance decay with time
• Non-polar device, minimizing installation concerns
• Encapsulation meets flammability standard UL 94V–0
• Halogen-free
Applications
Typical applications include critical timing, tuning, circuits requiring low loss, circuits with pulse, high current, decoupling,
bypass, filtering, transient voltage suppression, blocking and energy storage, circuits with a direct battery or power source
connection, critical and safety relevant circuits without (integrated) current limitation and any application that is subject to
extreme environments such as high shock and vibration, high temperature, high levels of board flexure and/or temperature
cycling. Programs supported include down-hole exploration, aerospace engine compartments, geophysical probes, hybrid
and electric automotive motor drives and defense. Markets include military, industrial, aerospace, and automotive.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016 2

No Preview Available !

Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Qualification
These devices are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 2,
Performance & Reliability.
Environmental Compliance
RoHS compliant and halogen-free. These devices utilize exemption 7(a) of the RoHS directive.
Series
C052H
C062H
RoHS
Compliant
Yes
Yes
RoHS
Exemption Code1
7(a)
7(a)
Halogen Free
Yes
Yes
1 7(a): Lead in high melting temperature type solders
Electrical Parameters/Characteristics
Item Parameters/Characteristics
Operating Temperature Range −55°C to +200°C
Capacitance Change with Reference to
+25°C and 0 VDC Applied (TCC)
±30 ppm/ºC
Aging Rate (Maximum % Cap Loss/Decade Hour)
Dielectric Withstanding Voltage
Dissipation Factor (DF) Maximum Limit at 25ºC
0%
250% of rated voltage
(5±1 seconds and charge/discharge not exceeding 50 mA at 25°C)
0.1%
Insulation Resistance (IR) Limit at 25°C
1,000 MΩ microfarads or 100 GΩ
(Rated voltage applied for 120±5 seconds)
To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Capacitance and dissipation factor (DF) measured under the following conditions:
1 MHz ±100 kHz and 1.0 Vrms ±0.2 V if capacitance ≤ 1,000 pF
1 kHz ±50Hz and 1.0 Vrms ±0.2 V if capacitance > 1,000 pF
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known
as Automatic Level Control (ALC). The ALC feature should be switched to "ON."
Post Environmental Limits
Dielectric
C0G
High Temperature Life, Biased Humidity, Moisture Resistance
Rated DC Voltage Capacitance Value DF (%) Capacitance Shift
IR
All All 0.5 0.3% or ±0.25 pF 10% of Initial Limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016 3

No Preview Available !

Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Table 1A – C052 Style/Size (0.20" Lead Spacing), Capacitance Range Waterfall
C052 Style/Size (0.20" Lead Spacing)
Rated Voltage (VDC)
50 100 200
Voltage Code
512
Capacitance
Capacitance
Tolerance
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1,000 pF
1,200 pF
1,500 pF
1,800 pF
2,200 pF
B = ±0.1pF
C = ±0.25pF
D = ±0.5pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
Rated Voltage (VDC)
Voltage Code
Capacitance Code (Available Capacitance)
C052H109(1)5G5GA(3)
C052H129(1)5G5GA(3)
C052H159(1)5G5GA(3)
C052H189(1)5G5GA(3)
C052H229(1)5G5GA(3)
C052H279(1)5G5GA(3)
C052H339(1)5G5GA(3)
C052H399(1)5G5GA(3)
C052H479(1)5G5GA(3)
C052H569(1)5G5GA(3)
C052H689(1)5G5GA(3)
C052H829(1)5G5GA(3)
C052H100(2)5G5GA(3)
C052H120(2)5G5GA(3)
C052H150(2)5G5GA(3)
C052H180(2)5G5GA(3)
C052H220(2)5G5GA(3)
C052H270(2)5G5GA(3)
C052H330(2)5G5GA(3)
C052H390(2)5G5GA(3)
C052H470(2)5G5GA(3)
C052H560(2)5G5GA(3)
C052H680(2)5G5GA(3)
C052H820(2)5G5GA(3)
C052H101(2)5G5GA(3)
C052H121(2)5G5GA(3)
C052H151(2)5G5GA(3)
C052H181(2)5G5GA(3)
C052H221(2)5G5GA(3)
C052H271(2)5G5GA(3)
C052H331(2)5G5GA(3)
C052H391(2)5G5GA(3)
C052H471(2)5G5GA(3)
C052H561(2)5G5GA(3)
C052H681(2)5G5GA(3)
C052H821(2)5G5GA(3)
C052H102(2)5G5GA(3)
C052H122(2)5G5GA(3)
C052H152(2)5G5GA(3)
C052H182(2)5G5GA(3)
C052H222(2)5G5GA(3)
50
5
C052H109(1)1G5GA(3)
C052H129(1)1G5GA(3)
C052H159(1)1G5GA(3)
C052H189(1)1G5GA(3)
C052H229(1)1G5GA(3)
C052H279(1)1G5GA(3)
C052H339(1)1G5GA(3)
C052H399(1)1G5GA(3)
C052H479(1)1G5GA(3)
C052H569(1)1G5GA(3)
C052H689(1)1G5GA(3)
C052H829(1)1G5GA(3)
C052H100(2)1G5GA(3)
C052H120(2)1G5GA(3)
C052H150(2)1G5GA(3)
C052H180(2)1G5GA(3)
C052H220(2)1G5GA(3)
C052H270(2)1G5GA(3)
C052H330(2)1G5GA(3)
C052H390(2)1G5GA(3)
C052H470(2)1G5GA(3)
C052H560(2)1G5GA(3)
C052H680(2)1G5GA(3)
C052H820(2)1G5GA(3)
C052H101(2)1G5GA(3)
C052H121(2)1G5GA(3)
C052H151(2)1G5GA(3)
C052H181(2)1G5GA(3)
C052H221(2)1G5GA(3)
C052H271(2)1G5GA(3)
C052H331(2)1G5GA(3)
C052H391(2)1G5GA(3)
C052H471(2)1G5GA(3)
C052H561(2)1G5GA(3)
C052H681(2)1G5GA(3)
C052H821(2)1G5GA(3)
C052H102(2)1G5GA(3)
C052H122(2)1G5GA(3)
C052H152(2)1G5GA(3)
C052H182(2)1G5GA(3)
C052H222(2)1G5GA(3)
100
1
C052H109(1)2G5GA(3)
C052H129(1)2G5GA(3)
C052H159(1)2G5GA(3)
C052H189(1)2G5GA(3)
C052H229(1)2G5GA(3)
C052H279(1)2G5GA(3)
C052H339(1)2G5GA(3)
C052H399(1)2G5GA(3)
C052H479(1)2G5GA(3)
C052H569(1)2G5GA(3)
C052H689(1)2G5GA(3)
C052H829(1)2G5GA(3)
C052H100(2)2G5GA(3)
C052H120(2)2G5GA(3)
C052H150(2)2G5GA(3)
C052H180(2)2G5GA(3)
C052H220(2)2G5GA(3)
C052H270(2)2G5GA(3)
C052H330(2)2G5GA(3)
C052H390(2)2G5GA(3)
C052H470(2)2G5GA(3)
C052H560(2)2G5GA(3)
C052H680(2)2G5GA(3)
C052H820(2)2G5GA(3)
C052H101(2)2G5GA(3)
C052H121(2)2G5GA(3)
C052H151(2)2G5GA(3)
C052H181(2)2G5GA(3)
C052H221(2)2G5GA(3)
C052H271(2)2G5GA(3)
C052H331(2)2G5GA(3)
C052H391(2)2G5GA(3)
C052H471(2)2G5GA(3)
C052H561(2)2G5GA(3)
C052H681(2)2G5GA(3)
C052H821(2)2G5GA(3)
C052H102(2)2G5GA(3)
C052H122(2)2G5GA(3)
C052H152(2)2G5GA(3)
C052H182(2)2G5GA(3)
C052H222(2)2G5GA(3)
200
2
(1) (2) To complete ordering code, insert the proper character for capacitance tolerance: (See table above for character definitions)
(1) Available capacitance tolerances: B, C, D
(2) Available capacitance tolerances: F, G, J, K
(3) To complete ordering code, enter the four-digit numeric or alphanumeric "Packaging C-Spec Ordering Code." See details below:
Blank = Bulk Bag
T250 = 250 pcs / 12" Reel
T500 = 500pcs / 12" Reel
T1K0 = 1,000 pcs / 12" reel
7301 = Full Reel Qty / 12" reel
7303 = Full Reel Qty / 12" reel
7061 = Bulk Tray
These products are protected under U.S. Patents 7172985 and 7670981, other patents pending, and any foreign counterparts.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016 4

No Preview Available !

Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, C0G Dielectric, 50 – 200 VDC (Industrial Grade)
Table 1A – C052 Style/Size (0.20" Lead Spacing), Capacitance Range Waterfall cont'd
C052 Style/Size (0.20" Lead Spacing)
Rated Voltage (VDC)
50 100 200
Voltage Code
512
Capacitance
Capacitance
Tolerance
2,700 pF
3,300 pF
3,900 pF
4,700 pF
5,600 pF
6,800 pF
8,200 pF
0.01 µF
0.012 µF
0.015 µF
0.018 µF
0.022 µF
0.027 µF
0.033 µF
0.039 µF
0.047 µF
0.056 µF
0.068 µF
0.082 µF
0.1 µF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
Rated Voltage (VDC)
Voltage Code
Capacitance Code (Available Capacitance)
C052H272(2)5G5GA(3)
C052H332(2)5G5GA(3)
C052H392(2)5G5GA(3)
C052H472(2)5G5GA(3)
C052H562(2)5G5GA(3)
C052H682(2)5G5GA(3)
C052H822(2)5G5GA(3)
C052H103(2)5G5GA(3)
C052H123(2)5G5GA(3)
C052H153(2)5G5GA(3)
C052H183(2)5G5GA(3)
C052H223(2)5G5GA(3)
C052H273(2)5G5GA(3)
C052H333(2)5G5GA(3)
C052H393(2)5G5GA(3)
C052H473(2)5G5GA(3)
C052H563(2)5G5GA(3)
C052H683(2)5G5GA(3)
C052H823(2)5G5GA(3)
C052H104(2)5G5GA(3)
50
5
C052H272(2)1G5GA(3)
C052H332(2)1G5GA(3)
C052H392(2)1G5GA(3)
C052H472(2)1G5GA(3)
C052H562(2)1G5GA(3)
C052H682(2)1G5GA(3)
C052H822(2)1G5GA(3)
C052H103(2)1G5GA(3)
C052H123(2)1G5GA(3)
C052H153(2)1G5GA(3)
C052H183(2)1G5GA(3)
C052H223(2)1G5GA(3)
C052H273(2)1G5GA(3)
C052H333(2)1G5GA(3)
C052H393(2)1G5GA(3)
C052H473(2)1G5GA(3)
100
1
C052H272(2)2G5GA(3)
C052H332(2)2G5GA(3)
200
2
(1) (2) To complete ordering code, insert the proper character for capacitance tolerance: (See table above for character definitions)
(1) Available capacitance tolerances: B, C, D
(2) Available capacitance tolerances: F, G, J, K
(3) To complete ordering code, enter the four-digit numeric or alphanumeric "Packaging C-Spec Ordering Code." See details below:
Blank = Bulk Bag
T250 = 250 pcs / 12" Reel
T500 = 500pcs / 12" Reel
T1K0 = 1,000 pcs / 12" reel
7301 = Full Reel Qty / 12" reel
7303 = Full Reel Qty / 12" reel
7061 = Bulk Tray
These products are protected under U.S. Patents 7172985 and 7670981, other patents pending, and any foreign counterparts.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1073_HT_C0G_RADIAL_MOLDED • 8/10/2016 5