H0505S-2W.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 H0505S-2W 데이타시트 다운로드

No Preview Available !

DC/DC Converter
G_S-2W & H_S-2W Series
2W isolated DC-DC converter with 6000VDC
Fixed input voltage, unregulated positive-negative
dual/single output
Patent Protection RoHS
FEATURES
SIP package
High efficiency up to 86%
I/O isolation test voltage 6k VDC
Operating ambient temperature range: -40~
+105
Continuous short-circuit protection
Internal surface mounted design
Industry standard pin-out
G_S-2W & H_S-2W series is specially designed for applications where an isolated voltage is required in a distributed power supply system. It is
suitable for:
1.Where the voltage of the input power supply is stable (voltage variation: ±10%Vin);
2.Where isolation is necessary between input and output (isolation voltage 6000VDC);
3.Where do not has high requirement of line regulation and the ripple & noise of the output voltage;
Such as: pure digital circuits, low frequency analog circuits, IGBT-driven circuits, etc.
Selection Guide
Input Voltage (VDC)
Output
Part No.
Nominal(Range)
Voltage(VDC)
Current (mA)
Max./Min.
G0505S-2W
±5 ±200/±20
G0509S-2W
±9 ±111/±12
G0512S-2W
±12 ±83/±9
G0515S-2W
±15 ±67/±7
G0524S-2W
H0503S-2W
5
(4.5-5.5)
±24
3.3
±42/±4
500/50
H0505S-2W
5 400/40
H0509S-2W
9 222/23
H0512S-2W
12 167/17
H0515S-2W
15 133/14
G1205S-2W
±5 ±200/±20
G1209S-2W
±9 ±111/±12
G1212S-2W
±12 ±83/±9
G1215S-2W
H1205S-2W
12
10.8-13.2
±15
5
±67/±7
400/40
H1209S-2W
9 222/23
H1212S-2W
12 167/17
H1215S-2W
15 133/14
G2405S-2W
±5 ±200/±20
G2412S-2W
±12 ±83/±9
G2415S-2W
±15 ±67/±7
H2405S-2W
H2409S-2W
24
21.6-26.4
5
9
400/40
222/23
H2412S-2W
12 167/17
H2415S-2W
15 133/14
H2424S-2W
24 83/9
Note:* The specified maximum capacitive load for positive and negative output is identical.
Full Load
Efficiency (%)
Min./Typ.
72/76
76/80
73/77
76/80
76/80
70/74
72/76
75/79
77/81
78/82
73/77
77/81
75/79
78/82
76/80
77/81
79/83
80/84
76/80
77/81
78/82
76/80
77/81
80/84
81/85
76/80
Capacitive
Load*(µF)
Max.
100
220
100
220
100
220
2019.01.28-C/3
Page 1 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

No Preview Available !

DC/DC Converter
G_S-2W & H_S-2W Series
Input Specifications
Item
Input Current (no-load/full load)
Surge Voltage (1sec. max.)
Input Filter
Operating Conditions
5V input
12V input
24V input
5V input
12V input
24V input
Min. Typ. Max.
-- 40/500 --
-- 16/200 --
-- 9/100 --
-0.7 --
9
-0.7 --
18
-0.7 --
30
Capacitance filter
Unit
mA
VDC
Output Specifications
Item
Operating Conditions
Min. Typ. Max.
Unit
Voltage Accuracy
See output regulation curve(Fig.1)
Linear Regulation
Input voltage change: ±1%
--
-- ±1.2
--
Balance of Output Voltage*
Dual output, balanced load
-- ±0.5 ±1
3.3VDC output
--
--
20
5VDC output
--
--
15
Load Regulation
10%-100% load
9VDC output
12VDC output
--
--
-- 15
-- 15
%
15VDC output
--
--
15
24VDC output
--
--
15
Ripple & Noise*
Temperature Coefficient
20MHz bandwidth
100% full load
-- 150 250 mVp-p
--
--
±0.03
%/
Short-circuit Protection
Continuous, self-recovery
Notes: 1.*Unbalanced load of positive-negative dual output module: ±5%.
2.*The “parallel cable” method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information.
General Specifications
Item
Operating Conditions
Min. Typ. Max.
Unit
Isolation
Insulation Resistance
Input-output Electric Strength Test for 1 minute with a leakage
current of 1mA max.
Input-output resistance at 500VDC
6000
1000
--
--
-- VDC
-- MΩ
Isolation Capacitance
Input-output capacitance at 100kHz/0.1V
-- 5 -- pF
Operating Temperature
Derating when operating temperature up to 85(see Fig. 2)
-40
-- 105
Storage Temperature
-55 -- 125
Case Temperature Rise
Ta=25
-- 25 --
Pin Soldering Resistance
Temperature
Soldering spot is 1.5mm away from case for 10 seconds
-- -- 300
Storage Humidity
Non-condensing
-- -- 95
%
Switching Frequency
100% load, nominal input voltage
5V input
12V/24V input
-- 60 --
KHz
-- 80 --
MTBF
MIL-HDBK-217F@25
3500
--
-- K hours
Mechanical Specifications
Case Material
Dimensions
Weight
Cooling Method
Black plastic; flame-retardant and heat-resistant (UL94 V-0)
19.50 x 9.80 x 12.50 mm
4.2g(Typ.)
Free air convection
Electromagnetic Compatibility (EMC)
Emissions
CE
RE
CISPR32/EN55032 CLASS B (see Fig. 5 for recommended circuit)
CISPR32/EN55032 CLASS B (see Fig. 5 for recommended circuit)
Immunity
ESD
IEC/EN61000-4-2 Contact ±6KV perf. Criteria B
2019.01.28-C/3
Page 2 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

No Preview Available !

DC/DC Converter
G_S-2W & H_S-2W Series
Typical Characteristic Curves
3.3VDC/5VDC output
Others
Fig. 1
Temperature Derating Graph
120
100
80
60
Safe Operating Area
40
20
0
-40 0 40 85 105
Ambient Temperature()
Fig. 2
2019.01.28-C/3
Page 3 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

No Preview Available !

DC/DC Converter
G_S-2W & H_S-2W Series
Design Reference
1. Typical application
Input and/or output ripple can be further reduced, by connecting a filter capacitor from the input and/or output terminals to ground as
shown in Fig.2.
Choosing suitable filter capacitor values is very important for a smooth operation of the modules, particularly to avoid start-up problems
caused by capacitor values that are too high. For recommended input and output capacitor values refer to Table 1.
The simplest device for output voltage regulation, over-voltage and over-current protection is a linear voltage regulator with overheat
protection that is connected to the input or output end in series (see Fig. 4).
S ing l e
Vin
L
L
+Vo
Cin
GND
DC DC
Cout
0V
Dual
Vin
L
L
Cout
+Vo
Cin
GND
DC DC
L Cout
0V
-Vo
Fig. 3
S i n g le
Vin
REG
GND
DC DC
Dual
Vin
GND
REG
DC DC
Fig. 4
REG
REG
REG
+Vo
0V
+Vo
0V
-Vo
Recommended capacitive load value table (Table 1)
Vin
(VDC)
Cin
(µF)
Single
Vout
(VDC)
Cout
(µF)
Dual
Vout
(VDC)
Cout
(µF)
5
10 3.3/5 10
±5 4.7
12 4.7 9 4.7 ±9 2.2
24 2.2 12
2.2 ±12
1
-- -- 15 1 ±15/±24 0.47
It is not recommended to connect any external capacitor when output power is less than 0.5W.
2. EMC (CLASS B) compliance circuit
Vin
GND
LDM
Vin +Vo
C1 C2
DC/DC C3
GND
Fig. 5
-Vo
(0V)
LO A D
Recommended typical circuit parameters:
Input voltage (V)
5/12/24
C1,C2
4.7µF /50V
EMI C3
Refer to the Cout in Fig.3
LDM
6.8µH
3. Output load requirements
For a reliable and efficient operation of the converter, the minimum load should never be less than 10% of the rated output load. If the total
required output power is below 10%, a parallel bleeding resistor is required on the output, ensuring that the sum of the power consumption is
always maintained at 10% minimum.
4. For additional information please refer to DC-DC converter application notes on
www.mornsun-power.com.
2019.01.28-C/3
Page 4 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

No Preview Available !

DC/DC Converter
G_S-2W & H_S-2W Series
Dimensions and Recommended Layout
Notes:
1. For additional information on Product Packaging please refer to www.mornsun-power.com. Packaging bag number: 58200013;
2. If the product is operated under the min. required load, the product performance cannot be guaranteed to comply with all
performance indexes in this datasheet;
3. The max. capacitive load should be tested within the input voltage range and under full load conditions;
4. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25, humidity<75%RH with nominal
input voltage and rated output load;
5. All index testing methods in this datasheet are based on our company corporate standards;
6. The performance indexes of the product models listed in this manual are as above, but some indexes of non-standard model products
will exceed the above-mentioned requirements, and please directly contact our technicians for specific information;
7. We can provide product customization service, please contact our technicians directly for specific information;
8. Products are related to laws and regulations: see "Features" and "EMC";
9. Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by
qualified units.
MORNSUN Guangzhou Science & Technology Co., Ltd.
Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China
Tel: 86-20-38601850
Fax: 86-20-38601272
E-mail: info@mornsun.cn
www.mornsun-power.com
2019.01.28-C/3
Page 5 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation