F1129.pdf 데이터시트 (총 3 페이지) - 파일 다운로드 F1129 데이타시트 다운로드

No Preview Available !

50Ω SE-In – 50Ω /100Ω DIFF-Out Amp
F1129
Family 1400MHz to 6000MHz
Short-Form Datasheet
Description
The F1129 family is a series of single-ended input / differential
output 1400MHz to 6000MHz high gain RF amplifiers. The
combination of low noise figure and high linearity performance
allows these device to be used in both receiver and transmitter
applications.
The F1129 series is designed to operate with a single 5V power
supply using a nominal 70mA of ICC. With a supply voltage of 5V,
the F1129 variant provides 18dB typical gain with 2.2dB noise
figure and +32dBm OIP3 at 3600MHz.
Each F1129 variant is packaged in a 2mm x 2mm, 12-pin DFN, with
50Ω single-ended RF input and 50Ω or 100Ω differential RF output
impedances for ease of integration into the signal-path.
Competitive Advantage
High Gain
Excellent Gain Flatness Over Frequency
Outstanding Gain Variance Over Temperature
STBY Feature
Differential Output to Directly Drive Transceiver Inputs
Typical Applications
5G / MIMO Base Stations
4G TDD & FDD Base Stations
2G/3G Base Stations
Repeaters and DAS
Point to Point Infrastructure
Public Safety Infrastructure
Military Handhelds
Features
RF Range: 1400MHz to 6000MHz
F1129Lx Variants: 1400MHz to 3200MHz
F1129Mx Variants: 3000MHz to 4200MHz
F1129Hx Variants: 4000MHz to 6000MHz
Gain = 18dB at 3600MHz
Noise Figure = 2.2dB at 3600MHz
OIP3 = +32dBm at 3600MHz
Output P1dB = +18dBm at 3600MHz
Near-Constant Gain versus Temperature
5V Power Supply
ICC = 70mA at 5V
2mA Standby Current
350mW Typical DC Power at 5V Supply
50Ω Single-ended Input Impedances
50Ω or 100Ω Differential Output Impedances
F1129xA Variants: 50Ω Differential Outputs
F1129xB Variants: 100Ω Differential Outputs
1.8V and 3.3V Logic Support for STBY Control
Operating Temperature (TEP) Range: -40°C to +115°C
2mm x 2mm, 12-pin DFN Package
Block Diagram
Figure 1. Block Diagram
RFIN
Bias
RFOUT +
RFOUT -
© 2019 Integrated Device Technology, Inc.
1
February 28, 2019

No Preview Available !

Component Family Variants
Base Part Number Frequency Band
F1129LA
F1129LB
F1129MA
F1129MB
F1129LA
F1129LB
Low
Mid
High
Frequency Coverage
1400MHz to 3200MHz
3000MHz to 4200MHz
4000MHz to 6000MHz
F1129 Short-Form Datasheet
Differential Output Impedance
50Ω
100Ω
50Ω
100Ω
50Ω
100Ω
Ordering Information
Orderable Part Number
Package
F1129LANELI
F1129LANELI8
F1129LBNELI
F1129LBNELI8
F1129MANELI
F1129MANELI8
F1129MBNELI
F1129MBNELI8
F1129HANELI
F1129HANELI8
F1129HBNELI
F1129HBNELI8
F1129EVB
2mm x 2mm x 0.75mm 12 pin DFN
2mm x 2mm x 0.75mm 12 pin DFN
2mm x 2mm x 0.75mm 12 pin DFN
2mm x 2mm x 0.75mm 12 pin DFN
2mm x 2mm x 0.75mm 12 pin DFN
2mm x 2mm x 0.75mm 12 pin DFN
2mm x 2mm x 0.75mm 12 pin DFN
2mm x 2mm x 0.75mm 12 pin DFN
2mm x 2mm x 0.75mm 12 pin DFN
2mm x 2mm x 0.75mm 12 pin DFN
2mm x 2mm x 0.75mm 12 pin DFN
2mm x 2mm x 0.75mm 12 pin DFN
Evaluation Board
MSL Rating
1
1
1
1
1
1
1
1
1
1
1
1
Shipping Packaging
Tray
Reel
Tray
Reel
Tray
Reel
Tray
Reel
Tray
Reel
Tray
Reel
Temperature
-40° to +115°C
-40° to +115°C
-40° to +115°C
-40° to +115°C
-40° to +115°C
-40° to +115°C
-40° to +115°C
-40° to +115°C
-40° to +115°C
-40° to +115°C
-40° to +115°C
-40° to +115°C
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138
www.IDT.com
Sales
1-800-345-7015 or 408-284-8200
Fax: 408-284-2775
www.IDT.com/go/sales
Tech Support
www.IDT.com/go/support
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at any time,
without notice, at IDT's sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same
way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability
of IDT's products for any particular purpose, an implied warranty of merchantability, or non -infringement of the intellectual property rights of others. This document is presented only as a guide and does not
convey any license under intellectual property rights of IDT or any third parties.
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be
reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the Uni ted States and other countries. Other trademarks used herein are the
property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated
Device Technology, Inc. All rights reserved.
© 2019 Integrated Device Technology, Inc.
2
February 28, 2019

No Preview Available !

IMPORTANT NOTICE AND DISCLAIMER
RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL
SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING
REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND
OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible
for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3)
ensuring your application meets applicable standards, and any other safety, security, or other requirements. These
resources are subject to change without notice. Renesas grants you permission to use these resources only for
development of an application that uses Renesas products. Other reproduction or use of these resources is strictly
prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property.
Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims,
damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject
to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use of any Renesas resources
expands or otherwise alters any applicable warranties or warranty disclaimers for these products.
(Rev.1.0 Mar 2020)
Corporate Headquarters
TOYOSU FORESIA, 3-2-24 Toyosu,
Koto-ku, Tokyo 135-0061, Japan
www.renesas.com
Trademarks
Renesas and the Renesas logo are trademarks of Renesas
Electronics Corporation. All trademarks and registered
trademarks are the property of their respective owners.
Contact Information
For further information on a product, technology, the most
up-to-date version of a document, or your nearest sales
office, please visit:
www.renesas.com/contact/
© 2020 Renesas Electronics Corporation. All rights reserved.