2SC5171.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 2SC5171 데이타시트 다운로드

No Preview Available !

TOSHIBA Transistor Silicon NPN Epitaxial Type
2SC5171
Power Amplifier Applications
Driver Stage Amplifier Applications
2SC5171
Unit: mm
High transition frequency: fT = 200 MHz (typ.)
Complementary to 2SA1930
Absolute Maximum Ratings (Tc = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
Collector current
Base current
Collector power
dissipation
Ta = 25°C
Tc = 25°C
VCBO
VCEO
VEBO
IC
IB
PC
180 V
180 V
5V
2A
1A
2.0
W
20
JEDEC
Junction temperature
Storage temperature range
Tj 150 °C
Tstg
55 to 150
°C
JEITA
TOSHIBA
2-10R1A
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
Weight: 1.7 g (typ.)
temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating
conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
1 2006-11-10
Free Datasheet http://www.Datasheet4U.com

No Preview Available !

Electrical Characteristics (Tc = 25°C)
Characteristics
Collector cut-off current
Emitter cut-off current
Collector-emitter breakdown voltage
DC current gain
Collector-emitter saturation voltage
Base-emitter voltage
Transition frequency
Collector output capacitance
Symbol
Test Condition
ICBO
IEBO
V (BR) CEO
hFE (1)
hFE (2)
VCE (sat)
VBE
fT
Cob
VCB = 180 V, IE = 0
VEB = 5 V, IC = 0
IC = 10 mA, IB = 0
VCE = 5 V, IC = 0.1 A
VCE = 5 V, IC = 1 A
IC = 1 A, IB = 0.1 A
VCE = 5 V, IC = 1 A
VCE = 5 V, IC = 0.3 A
VCB = 10 V, IE = 0, f = 1 MHz
Marking
2SC5171
Min Typ. Max Unit
― ― 5.0 μA
― ― 5.0 μA
180
V
100 320
50 ― ―
0.16 1.0
V
0.68 1.5
V
200 MHz
16 pF
C5171
Part No. (or abbreviation code)
Lot No.
A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
2 2006-11-10
Free Datasheet http://www.Datasheet4U.com

No Preview Available !

2.0
150
100
1.6
IC – VCE
50
40
30
20
1.2 10
8
6
0.8
4
IB = 2 mA
0.4
Common emitter
Tc = 25°C
0
0 2 4 6 8 10
Collector-emitter voltage VCE (V)
2SC5171
IC – VBE
2.0
1.6
1.2
Tc = 100°C
25°C
0.8
25°C
0.4
Common emitter
VCE = 5 V
0
0 0.4 0.8 1.2 1.6 2.0
Base-emitter voltage VBE (V)
VCE (sat) – IC
1
0.1
0.01
0.01
Tc = 100°C
Tc = 25°C
Tc = 25°C
Common emitter
IC/IB = 10
0.1 1
10
Collector current IC (A)
Safe Operating Area
5 IC max (pulsed)*
3 10 ms*
IC max
(continuous)
1
DC operation
0.5 Tc = 25°C
0.3
100 μs*
1 ms*
100 ms*
0.1
0.05
0.03
*: Single nonrepetitive pulse
Tc = 25°C
Curves must be derated
linearly with increase in
0.01 temperature.
VCEO max
3 10 30 100 300 1000
Collector-emitter voltage VCE (V)
1000
hFE – IC
300 Tc = 100°C
100
Tc = 25°C
30
Tc = 25°C
10
3
0.01
Common emitter
VCE = 5 V
0.1 1 10
Collector current IC (A)
3 2006-11-10
Free Datasheet http://www.Datasheet4U.com

No Preview Available !

2SC5171
RESTRICTIONS ON PRODUCT USE
The information contained herein is subject to change without notice.
20070701-EN
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
4 2006-11-10
Free Datasheet http://www.Datasheet4U.com