61063.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 61063 데이타시트 다운로드

No Preview Available !

61063
PHOTODIODE “PILL PACK”
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
Hermetically sealed
High sensitivity
Small package
Suitable for high-density pc board mounting
Spectrally matched to the 62000 series LED.
Applications:
Incremental encoding
Reflective sensors
Position sensors
Level sensors
DESCRIPTION
The 61063 is a Silicon Photodiode in a package designed to be mounted in a double-clad printed circuit board. It is
available in a range of sensitivities and is lensed for minimum response to stray light. High sensitivity, low dark current
leakage, and low saturation voltage make this device ideal for interfacing with TTL circuits. Available in custom binned to
customer specifications or screened to MIL-PRF-19500.
ABSOLUTE MAXIMUM RATINGS
Storage Temperature......................................................................................................................................... -65°C to +150°C
Operating Temperature (See part selection guide for actual operating temperature)...................................... -65°C to +125°C
Reverse Voltage ..................................................................................................................................................................... 30V
Power Dissipation (Derate at the rate of 1.67 mW/°C above 25°C) ............................................................................... 150mW
Lead Soldering Temperature (3 minutes) ......................................................................................................................... 240°C
Package Dimensions
Schematic Diagram
0.019 [0.48]
0.009 0.23]
CERAM IC
LENS
0.092 [2.34]
0.084 [2.13]
Ø0.061 [1.55]
Ø0.058 [1.47]
ANODE
0.067 [1.70]
0.063 [1.60]
0.088 [2.24]
0.082 [2.08]
0.010 [0.25]
0.005 [0.013]
0.115 [2.92]
0.102 [2.59]
ALL DIM ENSIONS ARE IN INCHES [M ILLIM ETERS]
R0.010 ±0.001 [0.25]
CATHODE
0.24 [0.61]
0.016 [0.41]
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E. Walnut St., Garland, TX 75040 (972) 272-3571 Fax (972) 487-6918
www.micropac.com E-MAIL: optosales@micropac.com
6 - 18

No Preview Available !

61063
SILICON PHOTODIODE “PILL PACK”
ELECTRICAL CHARACTERISTICS
TA = 25°C unless otherwise specified.
PARAMETER
Light Current
61063-X01
Dark Current
61063-XXX
SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE
IL 6.0 15
µA VR = 5.0V, H = 20mW/cm2
1
ID
250 nA
VCE = 5V, H = 0
1
Reverse Breakdown Voltage
Rise Time
Fall Time
Angular Response
61063-XXX
61063-X01
61063-X01
61063-X01
VBR
tr
tf
θ
15
300
300
24
V
nS
nS
degrees
IR = 100µA, H = 0
VR = 5V
VR = 5V
2
NOTES:6
1. Irradiance in mW/cm2 from a tungsten source at a color temperature of 2870K.
2. The angle between incidence for peak response and incidence for 50% of peak response.
RECOMMENDED OPERATING CONDITIONS:
PARAMETER
SYMBOL
MIN
MAX
Reverse Voltage
VR 5
10
Irradiance (H)
H 15
25
PART NUMBER
61063-001
61063-101
SELECTION GUIDE
PART DESCRIPTION
Silicon Photodiode in pill package, commercial version
Silicon Photodiode in pill package (-55° to +100°C) with 100% screening
UNITS
V
mW/cm2
IL Range
+6µA
+6µA
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E. Walnut St., Garland, TX 75040 (972) 272-3571 Fax (972) 487-6918
www.micropac.com E-MAIL: optosales@micropac.com
6 - 19