TE104R.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 TE104R 데이타시트 다운로드

No Preview Available !

TE100R THRU TE108R
GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER
VOLTAGE - 50 to 800 Volts CURRENT - 1.0 Ampere
FEATURES
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O Utilizing
Flame Retardant Epoxy Molding Compound
l Glass passivated junction
l 1 ampere operation at TA=55 with no thermal runaway
l Exceeds environmental standards of MIL-S-19500/228
l Fast switching for high efficiency
DO-41
MECHANICAL DATA
Case: Molded plastic, DO-41
Terminals: axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
.375"(9.5mm) lead length at TA=55
Peak Forward Surge Current 8.3ms single half sine
wave superimposed on rated load(JECEC method)
Maximum Forward Voltage at 1.0A
Maximum Full Load Reverse Current Full Cycle
Average, .375”,9.5mm Lead Length at TA=55
Maximum DC Reverse Current
at Rated DC Blocking Voltage TA=100
Maximum Reverse Recovery Time(Note 1)
Typical Junction capacitance (Note 2) CJ
Typical Thermal Resistance (Note 3) R JA
Operating and Storage Temperature Range TJ
TE100R TE101R TE102R TE104R TE106R TE108R UNITS
50 100 200 400 600 800 V
35 70 140 280 420 560 V
50 100 200 400 600 800 V
1.0 A
30 A
1.3 V
5.0 A
150 A
150 150 150 150 250 500
15
67
-55 to +150
ns
PF
/W
NOTES:
1. Measured with IF=.5A, IR=1A, Irr=.25A
2. Measured at 1 MHz and applied reverse voltage of 4.0 VDC
3. Thermal resistance from junction to ambient at 0.375"(9.5mm) lead length P.C.B. mounted

No Preview Available !

RATING AND CHARACTERISTIC CURVES
TE100R THRU TE108R
Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
Fig. 2-TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
Fig. 3-FORWARD CURRENT DERATING CURVE
Fig. 4-TYPICAL JUNCTION CAPACITANCE Fig. 5-PEAK FORWARD SURGE CURRENT