R5900U-00-M4.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 R5900U-00-M4 데이타시트 다운로드

No Preview Available !

MULTIANODE
PHOTOMULTIPLIER TUBE
R5900U-00-M4
FEATURES
2 × 2 multianode
Newly developed "metal channel dynode"
High speed response
Low cross - talk
GENERAL
Parameter
Spectral Response
Wavelength of Maximum Response
Photocathode
Material
Minimum Effective Area
Window Material
Dynode
Structure
Number of Stages
Weight
Suitable Socket
Description / Value
300 to 650
420
Bialkali
18 × 18
Borosilicate glass
Metal channel dynode
10
Approx. 26
E678-32B (option)
Unit
nm
nm
mm2
g
MAXIMUM RATINGS (Absolute Maximum Values)
Parameter
Supply Voltage
Between Anode and Cathode
Average Anode Current
Value
900
0.1
Unit
Vdc
mA
CHARACTERISTICS (at 25 °C)
Parameter
Cathode Sensitivity
Luminous (2856 K)
Blue (CS - 5 - 58 filter)
Anode Sensitivity
Luminous (2856 K)
Gain
Anode Dark Current per Channel
(after 30min. storage in darkness)
Time Response
Anode Pulse Rise Time
Transit Time Spread (FWHM)
Pulse Linearity per Channel ( ± 2 % deviation)
Cross - talk (9 × 9 mm2 Aperture)
Uniformity Between Each Anode
Min.
50
6
25
5 × 105
Typ.
70
8
140
2 × 106
0.5
1.2
0.32
5(30a)
2
1:1.5
Max.
4
1:3
NOTE : Anode characteristics are measured with the voltage distribution ration A shown below.
a : Measured with the special voltage distribution ratio B (Tapered Bleeder) shown below.
VOLTAGE DISTRIBUTION RATIO AND SUPPLY VOLTAGE
Electrodes
K Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 Dy10 P
Ratio A
1.5 1.5 1.5
1
1
1
1
1
1
1
1
Ratio B (Tapered Bleeder)
1.5 1.5 1.5
1
1
1
1
1
1
2
3.6
Supply Voltage: 800 Vdc, K: Cathode, Dy: Dynode, P: Anode
Unit
µA/lm
µA/lm-b
A/lm
nA
ns
ns
mA
%
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©1999 Hamamatsu Photonics K.K

No Preview Available !

MULTIANODE PHOTOMULTIPLIER TUBE R5900U-00-M4
Figure 1: Typical Spectral Response
TPMHB0266EA
100
10
CATHODE
RADIANT
SENSITIVITY
Figure 2: Typical Gain and Anode Dark Current
107 TPMHB0312EA
GAIN
106
105
QUANTUM
EFFICIENCY
1
104
ANODE DARK CURRENT
PER CHANNEL
103
10-5
10-6
10-7
10-8
10-9
102 10-10
0.1
101 10-11
0.01
100 200 300 400 500 600 700 800 900
WAVELENGTH (nm)
100
400
600 800
SUPPLY VOLTAGE (V)
10-12
1000
Figure 3: Typical Time Response
TPMHB0313EA
SUPPLY VOLTAGE=-800 (V)
RISE TIME=1176 (ps)
FALL TIME =1453 (ps)
WIDTH=2077 (ps)
RL=50 ()
Figure 4: Typical T.T.S. Characteristic
TPMHB0314EA
SUPPLY VOLTAGE= -800 V
104 FWHM= 310 psec
FWTM= 631 psec
103
102
101
100
2 (ns/div.)
TIME (0.5ns/div)

No Preview Available !

Figure 5: Pulse Linearity per Channel
TPMHB0315EA
10
PULSE WIDTH=50 (ns)
REPETITION=1 (kHz)
SUPPLY VOLTAGE= -800 (V)
0
Bleeder Ratio
1.5 : 1.5 : 1.5 : 1 : 1 : .... : 1 : 2 : 3.6
-10
-20
10-1
100 101
OUTPUT CURRENT (mA)
Figure 6: Anode Uniformity (Example)
102
Figure 7: Anode Cross Talk (Example)
82 95
97 100
Supply Voltage : 800 V
Light Source : Lamp(uniform DC light)
Full Illumination
0.1 0.9
1.3 100
Supply Voltage : 800 V
Light Source : Lamp(uniform DC light)
Spot Illumination : 9 × 9 mm2
Figure 8: Dimensional Outline and Basing Diagram (Unit: mm)
30.0 ± 0.5
25.7 ± 0.5
18MIN.
23.5 MAX. 4.4 ± 0.7
1 MAX.
2.54 PITCH
0.20
Top View
4 MAX.
PHOTOCATHODE
INSULATION
COVER
Side View
29- 0.45
Bottom View
1234 56 78 9
IC 32
10
P1 31
11
IC 30
12
IC 29 GUIDE
13
IC 28 CORNER 14
P4 27
15
IC 26
16
25 24 23 22 21 20 19 18 17
IC
P2
IC
IC
IC
P3
IC
K : Photocathode
Dy : Dynode
P : Anode
CUT : Short Pin
IC : Internal Connection
(Don't Use)
Basing Diagram
TPMHB297EF

No Preview Available !

MULTIANODE PHOTOMULTIPLIER TUBE R5900U-00-M4
[ACCESSORIES] OPTION
Socket E678-32B
22.86
20.32
4.45 2.92
0.51
12.7 1.57
MATERIAL: Glass Epoxy
TACCA0094ED
D Type Socket Assembly E7083
30.0 ± 0.5
PIN No.1
POM HOUSING
P2 P3
-HV
RG-174/U
ORIENTATION
BY MARKING
P1
POTTING
COMPOUND
P4
P1toP4:SIGNAL OUTPUTS
COAXIAL CABLE(GRAY)
27
15
11
31
P4 P3 P2 P1
DY10
DY9
DY8
DY7
DY6
DY5
DY4
DY3
DY2
DY1
K
R14 R11 C3
24
R13 R10 C2
23
R12 R9 C1
22
R8
21
R7
20
R6
19
R5
7
R4
6
R3
5
R2
4
R15 R1
1
P4
P3 SIGNAL OUTPUTS
P2 :COAXIAL CABLE (GRAY)
P1
R1 to R3 : 330 k
R4 to R11 : 220 k
R12 to R14 : 51
R15 : 1 M
C1 to C3 : 0.01 µF
-H.V
: RG-174U (RED)
*For a stable operation, all of anodes should be connected to
ground potential through load resistors such as 100 k ohm or
so, even if they are not used.
WARNING ~ High Voltage ~
The product is operated at high voltage potential. Further, the metal housing of the product is
connected to the photocathode (potential) so that it becomes a high voltage potential when the
product is operated at a negative high voltage (anode grounded).
Accordingly, extreme safety care must be taken for the electrical shock hazard to the operator or
the damage to the other instruments.
PATENT: USA Pat. No. 5410211 PATENT PENDING: JAPAN11, USA1, EUROPE2
TACCA0162EC
HOMEPAGE URL http://www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Center
314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: 44(20)8-367-3560, Fax: 44(20)8-367-6384
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01
Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741
TPMH1126E09
DEC. 1999 SI
Printed in Japan(1000)