W06.pdf 데이터시트 (총 1 페이지) - 파일 다운로드 W06 데이타시트 다운로드

No Preview Available !

SHANGHAI SUNRISE ELECTRONICS CO., LTD.
W005 THRU W10
SINGLE PHASE SILICON
BRIDGE RECTIFIER
TECHNICAL
SPECIFICATION
VOLTAGE: 50 TO 1000V CURRENT: 1.5A
FEATURES
• Ideal for printed circuit board
• Surge overload rating: 50 A peak
• High case dielectric strength
• High temperature soldering guaranteed:
250oC/10sec/0.375"(9.5mm) lead length
at 5 lbs tension
WOB
MECHANICAL DATA
• Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
• Case: UL-94 Class V-O recognized flame
retardant epoxy
• Polarity: Polarity symbol marked on body
• Mounting position: Any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load,
derate current by 20%)
RATINGS
SYMBOL W005 W01 W02 W04 W06 W08 W10 UNITS
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
(Ta=50oC)
Peak Forward Surge Current (8.3ms single
half sine-wave superimposed on rated load)
Maximum Instantaneous Forward Voltage
(at forward current 1.5A DC)
Maximum DC Reverse Current
(at rated DC blocking voltage)
Operating Temperature Range
Ta=25oC
Ta=100oC
Storage Temperature
VRRM
VRMS
VDC
IF(AV)
IFSM
VF
IR
TJ
TSTG
50 100 200 400 600 800 1000
35 70 140 280 420 560 700
50 100 200 400 600 800 1000
1.5
V
V
V
A
50 A
1.0
10.0
500
-55 to +125
-55 to +150
V
µA
µA
oC
oC
http://www.sse-diode.com