LA6513.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 LA6513 데이타시트 다운로드

No Preview Available !

Ordering number:ENN4424
Monolithic Linear IC
LA6512, 6513
High-Voltage
Dual Power Operational Amplifiers
Overview
LA6512 (SIP10F) and LA6513 (SIP10) are power opera-
tional amplifier ICs capable of withstanding high voltages
of ±30 V/1 A and are best suited for such voltage division
devices as LCD drivers and general-purpose power opera-
tional amplifiers.
Features
• High output current (IO max=1.0A).
• High gain.
• Equipped with current limiter pin (Adjustable by exter-
nal settings).
• Supports single power source operation.
• Withstands high voltages (±30V).
Package Dimensions
unit:mm
3046B-SIP10F
[LA6512]
25.5
24.0
3.6
1
1.32 2.54
0.5
1.3
unit:mm
3043A-SIP10
[LA6513]
24.2
3.6
10
0.45
1.6
SANYO : SIP10F
3.25
1
0.67 2.54
0.5
1.2
10
0.25
1.5
SANYO : SIP10
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
33100TN (KT)/41893TS A8-9798, 9799 No.4424–1/4

No Preview Available !

LA6512, 6513
Specifications
Maximum Ratings at Ta = 25˚C
Parameter
Maximum supply voltage
Differential input voltage
Common-mode input voltage
Maximum output current
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC/
VEE max
VIDIF
VICOM
IO max
Pd max
Topr
Tstg
LA6512
LA6513
Conditions
Operating Characteristics at Ta = 25˚C, VCC/VEE=±15
Parameter
Symbol
Conditions
No load current drain
Input offset voltage
Input offset current
Input bias current
Common-mode input voltage range
Common-mode single rejection ratio
Maximum output voltage
Voltage gain
Slew rate
Supply voltage rejection ratio
Limiting current
ICCO
VIO
IIO
IB
VICM
CMRR
VO max
VGO
SR
SVRR
ISC
RS10k
GV=0, RL=33, R=2.2, C=0.1µF
RSC=2.2
Ratings
Unit
±30 V
56
±28
1.0
2.5
1.3
–20 to +75
–55 to +150
V
V
A
W
W
˚C
˚C
Ratings
min typ
6 12
2
10
100
–14
70 80
±12 ±13
100
0.15
30
0.35
max
20
6
200
700
+13
150
Unit
mA
mV
nA
nA
V
dB
V
dB
V/µs
µV/V
A
Pin Assignment
(LA6512, 6513 common)
No.4424–2/4

No Preview Available !

Test Circuits
ICC
LA6512, 6513
VIO, SVRR
IIO IB (+)
IB (–)
CMRR, VICM
VO SR
Sample Application Circuit
Note : When driving an inductive load, a D1 to D4 protective diode should be installed.
No.4424–3/4

No Preview Available !

LA6512, 6513
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of March, 2000. Specifications and information herein are subject to
change without notice.
PS No.4424–4/4