8183.pdf 데이터시트 (총 8 페이지) - 파일 다운로드 8183 데이타시트 다운로드

No Preview Available !

8183
LOW-DROPOUT,
8183
LOW-DROPOUT, 3 V REGULATOR
— HIGH E3 FVFRIECGIUELNA-CY
Designed specifically to meet the requirement for extended opera-
TOR
CT6 5 4
U YSUB
OD NLVR
PR OSUB
E1 2
3
NUEDRENCDwg.PS-021
NTI EFEABSOLUTE MAXIMUM RATINGS
O RInput Voltage, VI . . . . . . . . . . . . . . 10 V
COutput Current, IO . . . . . . . . . 150 mA*
S REnable Input Voltage, VE . . . . . . . . . . VI
Operating Temperature Range,
I OTA . . . . . . . . . . . . . -20°C to +85°C
D FJunction Temperature, TJ . . . +150°C
Storage Temperature Range,
TS . . . . . . . . . . . . -40°C to +150°C
* Output current rating is limited by input voltage,
tion of battery-powered equipment such as cordless and cellular
telephones, the A8183SLU voltage regulator offers the reduced dropout
voltage and quiescent current essential for maximum battery life.
Applicable also to palmtop computers and personal data assistants, the
device delivers a regulated, continuous 3 V output at up to 75 mA under
normal operating conditions, or to 150 mA (transient) under worst-case
conditions.
A PMOS pass element provides a typical dropout voltage of only
90 mV at 60 mA of load current. The low dropout voltage permits
deeper battery discharge before output regulation is lost. Furthermore,
quiescent current does not increase as the dropout voltage is ap-
proached, an ideal feature in standby/resume power systems where
data integrity is crucial. Regulator accuracy and excellent temperature
characteristics are provided by a bandgap reference. An ENABLE input
gives the designer complete control over power up, standby, or power
down.
This device is supplied in a 6-lead small-outline plastic package
(similar to the SOT-89/TO-243AA) for surface-mount applications. The
A8183SLU is rated for operation over a temperature range of -20°C to
+85°C.
FEATURES AND BENEFITS
s High Efficiency Provides Extended Battery Life
s 90 mV Typical Dropout Voltage at IO = 60 mA
s 45 µA Typical Quiescent Current at VI = 6 V
Less Than 1 µA “Sleep” Current
s Up to 150 mA Output Current
s CMOS-Compatible ON/OFF Control
For Power-Up, Standby, or Shutdown
s Internal Thermal Protection
s Surface-Mount Package
APPLICATIONS
duty cycle, and ambient temperature. Under
any set of conditions, do not exceed a junction
s Cordless and Cellular Telephones
temperature of +150°C. See next page.
s Personal Data Assistants
† Fault conditions that produce excessive junction
temperature will activate device thermal
shutdown circuitry. These conditions can be
tolerated but should be avoided.
s Personal Communicators
s Palmtop Computers
Always order by complete part number: A8183SLU .

No Preview Available !

8183
LOW-DROPOUT,
3 V REGULATOR
IN 4
FUNCTIONAL BLOCK DIAGRAM
6 OUT
ENABLE 3
BIAS
1 GND
DRIVE
ERROR
AMP
BANDGAP
REF.
2 SUB
5 SUB
SUB
Dwg. FS-012-3
Terminal numbering is in accordance with EIA/JEDEC convention.
Where EIAJ conventions apply, the tab is not numbered, resulting in
terminal 6 being designated terminal 5.
For proper operation, terminals 1 and 2 must be externally con-
nected together.
MAXIMUM ALLOWABLE OUTPUT CURRENT with device mounted on 2.24" x 2.24"
(56.9 mm x 56.9 mm) solder-coated copper-clad board in still air.
Maximum Allowable Output Current in Milliamperes with VI = 8 V, TJ = 150°C, Period 10 s*
dc (Duty Cycle)
TA
100%
90%
80%
70%
60%
50%
40%
30%
20%
25°C
95
105 120 135 150 150 150 150 150
50°C
75
85
95 110 125 150 150 150 150
70°C
60
65
75
85 100 120 150 150 150
85°C
50
55
60
70
80 100 125 150 150
* IO = (TJ - TA)/([VI - VO] RθJA • dc) = (150 - TA)/(5 • 258 • dc)
Output current rating can be increased (to 150 mA maximum) by heat sinking or reducing the input voltage. Conditions that produce excessive
junction temperature will activate device thermal shutdown circuitry. These conditions can be tolerated but should be avoided.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 1994 Allegro MicroSystems, Inc.

No Preview Available !

8183
LOW-DROPOUT,
ELECTRICAL CHARACTERISTICS at TA = +25°C (unless otherwise n3oteVd)R. EGULA-
Limits
Characteristic
Symbol Test Conditions
TOROutput Voltage
VO 4 V VI 8 V,
TA = +25°C
10 µA IO 100 mA* -20°C TA +85°C
VI = 3 V, IO = 60 mA*, -20°C TA +85°C
Output Volt. Temp. Coeff.
αVO VI = 6 V, IO = 10 mA
Line Regulation
VO(VI)
6 V VI 8 V, IO = 1 mA
4 V VI 6 V, IO = 1 mA
Load Regulation
VO(IO)
1 mA IO 100 mA*, VI = 8 V
1 mA IO 100 mA*, VI = 6 V
1 mA IO 100 mA*, VI = 4 V
Dropout Voltage
VImin - VO IO = 60 mA*
IO = 125 mA*
Quiescent Current
IQ VI = 6 V, 1 mA IO 100 mA*, VE 2.0 V
(GND terminal current)
VI = 8 V, 1 mA IO 100 mA*, VE 2.0 V
IQ(off)
4 V VI 8 V, VE 0.8 V
ENABLE Input Voltage
VEH 4 V VI 8 V,
Output ON
VEL -20°C TA +85°C Output OFF
ENABLE Input Current
IE TA +85°C, VE = VI = 8 V
Thermal Shutdown Temp.
TJ
Thermal Resistance
RθJA Mounted on 2.24" x 2.24" solder-coated
copper-clad board in still air
Typical values are at TA = +25°C and are given for circuit design information only.
* Pulse test (20 ms). See previous page for duty cycle limitations.
Min.
2.95
2.90
2.70
2.0
150
Typ.
3.00
3.00
4.0
9.5
19
14
8.0
90
190
45
50
258
Max.
3.05
3.10
±1.0
10
18
30
25
20
150
300
60
65
1.0
0.8
±0.1
Units
V
V
V
mV/°C
mV
mV
mV
mV
mV
mV
mV
µA
µA
µA
V
V
µA
°C
°C/W

No Preview Available !

8183
LOW-DROPOUT,
3 V REGULATOR
TYPICAL CHARACTERISTICS
LOAD REGULATION
LINE REGULATION
3.06
3.04
3.02
3.00
VI = 8 V
VI = 6 V
2.98
2.96
2.94 TA = -20°C
V =4V
I
2.92
0
25 50 75 100
OUTPUT CURRENT in mA
125 150
Dwg. GP-052-3
3.06
3.04
3.02
3.00
2.98
2.96
2.94
2.92
2.0
TA = -20°C
50 mA INTERVALS
IO = 100 mA
IO = 0 mA
3.0 4.0 5.0 6.0
INPUT VOLTAGE in VOLTS
7.0 8.0
Dwg. GP-053-3
3.06
3.04
3.02
3.00
VI = 8 V
2.98
2.96
2.94
TA = 25°C
2 V INTERVALS
V =4V
I
2.92
0
25 50 75 100
OUTPUT CURRENT in mA
125 150
Dwg. GP-052-4
3.06
3.04
3.02
3.00
2.98
2.96
2.94
2.92
2.0
IO = 0 mA
TA = 25°C
50 mA INTERVALS
IO = 100 mA
3.0 4.0 5.0 6.0
INPUT VOLTAGE in VOLTS
7.0 8.0
Dwg. GP-053-4
CAUTION: Maximum allowable duty cycle will be significantly less than 100% at high temperatures, at high input voltages, or at high output currents.
See Maximum Allowable Output Current table.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000

No Preview Available !

8183
LOW-DROPOUT,
TYPICAL CHARACTERISTICS (cont’d) 3 V REGULA-
T3O.06 R
3.04
3.02
LOAD REGULATION
LINE REGULATION
3.06
3.04
3.02
TA = 85°C
50 mA INTERVALS
3.00
2.98
VI = 8 V
3.00
IO = 0 mA
2.98
2.96
2.94
TA = 85°C
2 V INTERVALS
VI = 4 V
2.92
0
25 50 75 100
OUTPUT CURRENT in mA
125 150
Dwg. GP-052-5
2.96
2.94
2.92
2.0
OUTPUT VOLTAGE
IO = 100 mA
3.0 4.0 5.0 6.0
INPUT VOLTAGE in VOLTS
7.0 8.0
Dwg. GP-053-5
3.5
3.0
VI = 6 V
2.5
3.01
IO = 0
2.0 3.00
1.5 2.99
IO = 0 - 100 mA
1.0
TA = 25°C
2.98
0.5
0
0
1.0 2.0 3.0
INPUT VOLTAGE in VOLTS
4.0
Dwg. GP-059
-50 0 +50
AMBIENT TEMPERATURE in °C
+100
Dwg. GP-050-1
CAUTION: Maximum allowable duty cycle will be significantly less than 100% at high temperatures, at high input voltages, or at high output currents.
See Maximum Allowable Output Current table.