90-110MT..KB Series
Bulletin I27501 rev. A 05/03
ELECTRICAL SPECIFICATIONS
Voltage Ratings
Voltage
Type number Code
VRRM , maximum repetitive
peak reverse voltage
V
80 800
100 1000
90-110MT..KB
120
140
160
1200
1400
1600
VRSM , maximum non-
repetitive peak rev. voltage
V
900
1100
1300
1500
1700
IRRM max.
@ TJ max.
mA
10
Forward Conduction
Parameter
90MT.KB 110MT.KB Units Conditions
IO Maximum DC output current
@ Case temperature
IFSM Maximum peak, one-cycle forward,
non-repetitive surge current
I2t Maximum I2t for fusing
I2√t Maximum I2√t for fusing
VF(TO)1 Low level value of threshold voltage
VF(TO)2 High level value of threshold voltage
rf1 Low level value of forward slope resistance
rf2 High level value of forward slope resistance
VFM Maximum forward voltage drop
VINS RMS isolation voltage
90 (120)
90 (61)
770
810
650
680
3000
2700
2100
1900
30000
0.89
1.05
5.11
4.64
1.6
4000
110 (150)
90 (57)
950
1000
800
840
4500
4100
3200
2900
45000
0.81
0.99
4.37
4.64
1.4
4000
A 120° Rect conduction angle
°C
A t = 10ms No voltage
t = 8.3ms reapplied
t = 10ms 100% VRRM
t = 8.3ms reapplied Initial TJ = TJ max.
A2s t = 10ms No voltage
t = 8.3ms reapplied
t = 10ms 100% VRRM
t = 8.3ms reapplied
A2√s t = 0.1 to 10ms, no voltage reapplied
V (16.7% x π x IF(AV) < I < π x IF(AV)), @ TJ max.
(I > π x IF(AV)), @ TJ max.
mΩ (16.7% x π x IF(AV) < I < π x IF(AV)), @ TJ max.
(I > π x IF(AV)), @ TJ max.
V Ipk = 150A, TJ = 25°C, tp = 400µs single junction
V TJ = 25°C, all terminal shorted
f = 50Hz, t = 1s
Thermal and Mechanical Specifications
Parameter
90MT.KB 110MT.KB Units Conditions
TJ Max. junction operating temperature range
Tstg Max. storage temperature range
RthJC Max. thermal resistance, junction to case
RthCS Max. thermal resistance, case to heatsink
T Mounting torque ± 10% to heatsink
to terminal
wt Approximate weight
-40 to 150
-40 to 150
0.21
0.18
1.26
1.07
0.25
0.21
1.47
1.25
0.03
4 to 6
3 to 4
176
°C
°C
K/W DC operation per module
DC operation per junction
120° Rect condunction angle per module
120° Rect condunction angle per junction
K/W Per module
Mounting surface smooth, flat and greased
Nm A mounting compound is recommended and the
torque should be rechecked after a period of 3
hours to allow for the spread of the compound.
Lubricated threads.
g
2 www.irf.com