NTE869.pdf 데이터시트 (총 3 페이지) - 파일 다운로드 NTE869 데이타시트 다운로드

No Preview Available !

NTE869
Integrated Circuit
Dual, High Speed, Programmable
Current Mode (Norton) Amp
Description:
The NTE869 consists of two current differencing (Norton) input amplifiers. Emphasis has been
placed on obtaining high frequency performance and providing user programmable amplifier operat-
ing characteristics. Each amplifier is broadbanded to provide a high gain bandwidth product, fast slew
rate and stable operation for an Inverting closed loop gain of 10 or greater. Pins for additional external
frequency compensation are provided. The amplifiers are designed to operate from a single supply
and can accommodate input common–mode voltages greater than the supply.
Applications:
D General Purpose Video Amplifiers
D High Frequency, High Q Active Filters
D Photo–Diode Amplifiers
D Wide Frequency Range Waveform Generation Circuits
D AC Applications Work to much Higher Frequencies
Features:
D User programmable gain bandwidth product, slew rate, input bias current, output stage biasing
current and total device power dissipation.
D High gain bandwidth product (ISET = 0.5mA)
400MHZ for AV = 10 to 100
30MHZ for AV = 1
D Current differencing inputs allow high common–mode input voltages
D Operates from a single 5V to 22V supply
D Large inverting amplifier output swing, 2mV to VCC –2V
D Low spot noise, 6nV/Hz, for f > 1kHZ
Absolute Maximum Ratings:
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22V
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±11V
Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750mW
Input Currents, IIN(+) or IIN(–) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mA
Set Currents, ISET(IN) or ISET(OUT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2mA
Maximum Junction Temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +125°C
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° to 70°C
Thermal Resistance, Junction–to–Ambient, RthJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160°C/W
Lead Temperature (During Soldering, 10sec), TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +300°C

No Preview Available !

Electrical Characteristics: (ISET(IN) = ISET(OUT) = 0.5mA, Vsupply = 12V, TA = +25°C unless
otherwise noted.)
Parameter
Test Conditions
Min Typ Max Unit
Open Loop Voltage Gain
Bandwidth Unity Gain
Gain Bandwidth Product Gain
of 10 to 100
Vsupply = 12V, RL = 1k, f = 100Hz
TA = 125°C
RIN = 1k, Ccomp = 10pF
RIN 50to 200
62 72
68
dB
15 30 MHZ
200 400 MHZ
Slew Rate
Unity Gain
Gain of 10 to 100
RIN = 1k, Ccomp = 10pF
RIN < 200
V/µs
30
60
Amplifier to Amplifier Coupling f = 100HZ to 100kHZ, RL = 1k
– –80
dB
Mirror Gain (Note 1)
@ 2mA IIN(+), ISET = 5µA, TA = 25°C
@ 0.2mA IIN(+), ISET=5µA Over Temp
@ 20µA IIN(+), ISET = 5µA Over Temp
0.9 1.0 1.1 µA/µA
0.9 1.0 1.1
0.9 1.0 1.1
Mirror Gain (Note 1)
@ 20µA to 0.2mA IIN(+) Over Temp, ISET = 5µA
35
%
Input Bias Current
Inverting Input, TA = 25°C Over Temp
8 15 µA
Input Resistance (βre)
Inverting Input
2.5
k
Output Resistance
Output Voltage Swing
VOUT High
VOUT Low
Output Currents
Source
Sink (Linear Region)
Sink (Overdriven)
Supply Current
Power Supply Rejection
IOUT = 15mA rms, f = 1MHz
RL = 600
IIN() & IIN(+) Grounded
IIN() = 100µA, IIN(+) = 0
IIN() & IIN(+) Grounded, RL = 100
Vcomp =0.5V = VOUT = 1V, IIN(+) = 0
IIN() = 100µA, IIN(+) = 0, VOUT Force = 1V
NonInverting Input Grounded, RL=
f = 120HZ, IIN(+) Grounded
3.5
9.5 10.3
2.0 50
16 40
4.7
1.5 3.0
18.5 22
40 50
V
mV
mA
mA
dB
Note 1. Mirror gain is the current gain of the current mirror which is used as the noninverting input.
IIN ()
AI = IIN (+)
Mirror

No Preview Available !

Pin Connection Diagram
ISET (Out) 1
VOut A 2
Comp A 3
GND A 4
N.C. 5
IIn () A 6
IIn (+) A 7
14 VOut B
13 Comp B
12 V +
11 GND B
10 IIn () B
9 IIn (+) B
8 ISET (In)
14 8
17
.785 (19.95)
Max
.300 (7.62)
.200 (5.08)
Max
.100 (2.45)
.600 (15.24)
.099 (2.5) Min