MN102H730.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 MN102H730 데이타시트 다운로드

No Preview Available !

MN102H730F , MN102H73G , MN102H73K
Type
ROM (×8-bit)
RAM (×8-bit)
Package
Minimum Instruction
Execution Time
Interrupts
Timer Counter
MN102H730F
External
10 K
TQFP128-P-1414B *Lead-free
With main clock operated
MN102H73G (under development) MN102H73K (under development)
128 K
256 K
10 K 12 K
TQFP128-P-1414A *Lead-free
58 ns (at 3.0 V to 3.6 V, 34 MHz)
• RST pin • Watchdog • NMI pin • Timer counter 0 to 9 underflow • Timer counter 10 to 14 underflow
• Timer counter 10 to 14 compare capture A • Timer counter 10 to 14 compare capture B
• ATC ch.0 to 1 transfer finish • ETC ch.0 to 1 transfer finish
• External 0 to 7 • Serial ch.0 to 4 transmission • Serial ch.0 to 4 reception • A/D conversion finish
Timer counter 0 : 8-bit × 1
Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 8; TM0IO pin;
system clock (BOSC)
Interrupt source ················ underflow of timer counter 0
Timer counter 1 : 8-bit × 1
Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 8; TM1IO pin;
timer counter 0 output
Interrupt source ················ underflow of timer counter 1
Timer counter 2 : 8-bit × 1
Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 8; TM2IO pin;
timer counter 1 output
Interrupt source ················ underflow of timer counter 2
Timer counter 3 : 8-bit × 1
Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 8; TM3IO pin;
timer counter 2 output
Interrupt source ················ underflow of timer counter 3
Timer counter 4 : 8-bit × 1
Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 9; TM4IO pin;
system clock (BOSC)
Interrupt source ················ underflow of timer counter 4
Timer counter 5 : 8-bit × 1
Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 9; TM5IO pin;
timer counter 4 output
Interrupt source ················ underflow of timer counter 5
Timer counter 6 : 8-bit × 1
Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 9; TM6IO pin;
timer counter 5 output
Interrupt source ················ underflow of timer counter 6
Timer counter 7 : 8-bit × 1
Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 9; TM7IO pin;
timer counter 6 output
Interrupt source ················ underflow of timer counter 7
Timer counter 8 : 8-bit × 1
Clock source ····················· 1/2 of system clock (BOSC) frequency; system clock (BOSC);
1/4 of system clock (XI) frequency; TM8IO pin
Interrupt source ················ underflow of timer counter 8
1 MAE00010EEM

No Preview Available !

MN102H730F , MN102H73G , MN102H73K
Timer Counter (Continue)
Serial Interface
Multiply-and-Accumulate
I/O Pins
I/O
A/D Inputs
D/A Outputs
PWM
ICR
OCR
Notes
MAE00010EEM
Timer counter 9 : 8-bit × 1
Clock source ····················· 1/2 of system clock (BOSC) frequency; 1/64 of system clock (BOSC) frequency;
TM9IO pin; timer counter 8 output
Interrupt source ················ underflow of timer counter 9
Timer counter 10 : 16-bit × 1 (timer output, event count, input capture, PWM output, 2-phase encoder input)
Clock source ····················· underflow of timer counter 8, 9; TM10IOB pin; 1/2 of system clock (BOSC)
frequency; 2-phase encode of TM10IOA pin/TM10IOB pin (1 ×, 4 ×)
Interrupt source ················ underflow of timer counter 10; timer counter 10 compare capture A;
timer counter 10 compare capture B
Timer counter 11 : 16-bit × 1 (timer output, event count, input capture, PWM output, 2-phase encoder input)
Clock source ····················· underflow of timer counter 8, 9; TM11IOB pin; 1/2 of system clock (BOSC)
frequency; 2-phase encode of TM11IOA pin/TM11IOB pin (1 ×, 4 ×)
Interrupt source ················ underflow of timer counter 11; timer counter 11 compare capture A;
timer counter 11 compare capture B
Timer counter 12 : 16-bit × 1 (timer output, event count, input capture, PWM output, 2-phase encoder input)
Clock source ····················· underflow of timer counter 8, 9; TM12IOB pin; 1/2 of system clock (BOSC)
frequency; 2-phase encode of TM12IOA pin/TM12IOB pin (1 ×, 4 ×)
Interrupt source ················ underflow of timer counter 12; timer counter 12 compare capture A;
timer counter 12 compare capture B
Timer counter 13 : 16-bit × 1 (timer output, event count, input capture, PWM output, 2-phase encoder input)
Clock source ····················· underflow of timer counter 8, 9; TM13IOB pin; 1/2 of system clock (BOSC)
frequency; 2-phase encode of TM13IOA pin/TM13IOB pin (1 ×, 4 ×)
Interrupt source ················ underflow of timer counter 13; timer counter 13 compare capture A;
timer counter 13 compare capture B
Timer counter 14 : 16-bit × 1 (timer output, event count, input capture, PWM output, 2-phase encoder input)
Clock source ····················· underflow of timer counter 8, 9; TM14IOB pin; 1/2 of system clock (BOSC)
frequency; 2-phase encode of TM14IOA pin/TM14IOB pin (1 ×, 4 ×)
Interrupt source ················ underflow of timer counter 14; timer counter 14 compare capture A;
timer counter 14 compare capture B
Serial 0, 1 : 8-bit × 1 (transfer direction of MSB / LSB selectable, transmission / reception of 7, 8-bit length)
Clock source ····················· 1/8 of timer counter 6 underflow frequency; 1/8, 1/2 of timer counter 0
underflow frequency; external pin
Serial 2, 3 : 8-bit × 1 (transfer direction of MSB / LSB selectable, transmission / reception of 7, 8-bit length)
Clock source ····················· 1/8 of timer counter 2 underflow frequency; 1/8, 1/2 of timer counter 4
underflow frequency; external pin
UART × 4 (common use with serial 0 to 3)
I2C × 2 (common use with serial 1,3; single master)
16-bit sign × 16-bit sign + 40-bit sign
104 • Common use : 59 (use of full address, address data separate 16-bit mode)
• Common use : 76 (use of address 16-bit, address data separate 8-bit mode)
10-bit × 12-ch. (with S/H)
8-bit × 4-ch.
16-bit × 5-ch. (timer counter 10 to 14)
16-bit × 5-ch. (timer counter 10 to 14)
16-bit × 5-ch. (timer counter 10 to 14)
Address / data separate bus interface; 8 / 16-bit bus width selectable; SRAM interface
See the next page for electrical characteristics, pin assignment and support tool.
2

No Preview Available !

Electrical Characteristics
Supply current
Parameter
Operating supply current
Supply current at STOP
Supply current at HALT
Symbol
IDDopr
IDDS
IDDH
Condition
Limit
Unit
min typ max
VI = VDD or VSS, output open
f = 34 MHz , VDD = 3.3 V
60+10α* mA
Pin with pull-up resistor is open
all other input pins and Hi-Z state input/output
70 µA
pins are simultaneously applied VDD or VSS level
f = 34 MHz , VDD = 3.3 V, output open
30+10α* mA
(Ta = 40°C to +85°C , VDD = AVDD = 3.3 V , VSS = AVSS = 0 V)
* ”α” depends on products .
MN102H73G/73K/730F α = 0
MN102HF73G α = 1
MN102HF73K α = 2
3 MAE00010EEM

No Preview Available !

Pin Assignment
CS2,P53
VDD
VSS
BSTRE,P54
WR,P55
CS3,P56
A00,P20
A01,P21
A02,P22
A03,P23
A04,P24
A05,P25
A06,P26
A07,P27
A08,P30
TM6IO,PD6
TM7IO,PD7
A09,P31
A10,P32
A11,P33
A12,P34
A13,P35
VDD
TM8IO,PC4
A14,P36
A15,P37
A16,P40
A17,P41
A18,P42
A19,P43
A20,P44
A21,P45
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
155
126
127
128
MN102H730F , MN102H73G , MN102H73K
MN102H730F
MN102H73G
MN102H73K
64 PB2,SBT2,TM12IC
63 PB1,SBO2,TM11IC
62 PB0,SBI2,TM10IC
61 *PA5,SBT1
60 *PA4,SBO1
59 PA3,SBI1
58 PA2,SBT0
57 PA1,SBO0
56 PA0,SBI0
55 P75,TM12IOB
54 P74,TM14IC
53 P73,TM11IOB,STOP
52 P72,TM14IOB
51 P77,TM14IOA
50 VDD
49 PD3,TM3IO,DMAREQ0
48 PD2,TM2IO,DMAACK0
47 P71,TM13IC,WDOUT
46 P70,TM13IOB
45 WAIT,P67,IRQ7
44 P66,IRQ6
43 P65,TM12IOA,IRQ5
42 P64,TM11IOA,IRQ4
41 P63,TM10IOB,IRQ3
40 P62,TM10IOA,IRQ2
39 P61,TM3IO,IRQ1
38 P60,IRQ0
37 P76,TM13IOA
36 PC0,TM9IO
35 RST
34 NMI
33 BOSC
Support Tool
In-circuit Emulator
Flash Memory Built-in Type
TQFP128-P-1414A *Lead-free
TQFP128-P-1414B *Lead-free
* Use 4.7 kto 10 k.
PX-ICE102H73-128P1414
Type
ROM (× 8-bit)
RAM (× 8-bit)
Minimum instruction execution time
Package
MN102HF73G, MN102HF73K
128 K / 256 K
10 K / 12 K
58 ns (at 3.0 V to 3.6 V, 34 MHz)
TQFP128-P-1414B *Lead-free
MAE00010EEM
4

No Preview Available !

Request for your special attention and precautions in using the technical
information and semiconductors described in this book
(1) An export permit needs to be obtained from the competent authorities of the
Japanese Government if any of the products or technologies described in this book
and controlled under the "Foreign Exchange and Foreign Trade Law" is to be export-
ed or taken out of Japan.
(2) The technical information described in this book is limited to showing representative
characteristics and applied circuits examples of the products. It neither warrants
non-infringement of intellectual property right or any other rights owned by our com-
pany or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of
the use of the product or technologies as described in this book.
(4) The products described in this book are intended to be used for standard applica-
tions or general electronic equipment (such as office equipment, communications
equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control
equipment, combustion equipment, life support systems and safety devices) in
which exceptional quality and reliability are required, or if the failure or malfunction
of the products may directly jeopardize life or harm the human body.
• Any applications other than the standard applications intended.
(5) The products and product specifications described in this book are subject to
change without notice for modification and/or improvement. At the final stage of your
design, purchasing, or use of the products, therefore, ask for the most up-to-date
Product Standards in advance to make sure that the latest specifications satisfy your
requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular
those of maximum rating, the range of operating power supply voltage, and heat
radiation characteristics. Otherwise, we will not be liable for any defect which may
arise later in your equipment.
Even when the products are used within the guaranteed values, take into the con-
sideration of incidence of break down and failure mode, possible to occur to semi-
conductor products. Measures on the systems such as redundant design, arresting
the spread of fire or preventing glitch are recommended in order to prevent physical
injury, fire, social damages, for example, by using the products.
(7) When using products for which moisture-proof packaging is required, observe the
conditions (including shelf life and amount of time let standing of unsealed items)
agreed upon when specification sheets are individually exchanged.
(8) This book may be not reprinted or reproduced whether wholly or partially, without
the prior written permission of Matsushita Electric Industrial Co., Ltd.
If you have any inquiries or questions about this book or our semiconductor prod-
ucts, please contact one of our sales offices listed on the back or semiconductor
company’s sales department.
Windows is a registered trademark of Microsoft Corporation.
MS-DOS is a registered trademark of Microsoft Corporation.
Sun and Solaris are registered trademarks of Sun Microsystems, Inc.
PC-9801 is a registered trademark of NEC.
PC/AT is a registered trademark of International Business Machines Corporation.
TRON is an abbreviation of “The Real-time Operating system Nucleus.”
ITRON is an abbreviation of “Industrial TRON.”
µ ITRON is an abbreviation of “Micro Industrial TRON.”
TRON, ITRON, and µ ITRON do not refer to any specific product or products.
Other company names and product names are registered trademarks.