2SD1719.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 2SD1719 데이타시트 다운로드

No Preview Available !

Power Transistors
2SD1719
Silicon NPN triple diffusion planar type
For power amplification with high forward current transfer
Unit: mm
ratio
8.5±0.2
6.0±0.2
3.4±0.3
1.0±0.1
Features
High forward current transfer ratio hFE which has satisfactory lin-
earity
High emitter-base voltage (Collector open) VEBO
N type package enabling direct soldering of the radiating fin to the
printed circuit board, etc. of small electronic equipment.
Absolute Maximum Ratings TC = 25°C
Parameter
Symbol Rating
Collector-base voltage (Emitter open)
Collector-emitter voltage (Base open)
Emitter-base voltage (Collector open)
Collector current
Peak collector current
Base current
Collector power dissipation
Junction temperature
Ta = 25°C
Storage temperature
VCBO
VCEO
VEBO
IC
ICP
IB
PC
Tj
Tstg
100
60
15
6
12
3
40
1.3
150
55 to +150
Unit
V
V
V
A
A
A
W
°C
°C
0 to 0.4
0.8±0.1
2.54±0.3
1.4±0.1
R = 0.5
R = 0.5
1.0±0.1
0.4±0.1
5.08±0.5
123
(8.5)
(6.0)
1.3
(6.5)
1: Base
2: Collector
3: Emitter
N-G1 Package
Note) Self-supported type package is also prepared.
Electrical Characteristics TC = 25°C ± 3°C
Parameter
Symbol
Conditions
Min Typ Max Unit
Collector-emitter voltage (Base open)
Collector-base cutoff current (Emitter open)
Emitter-base cutoff current (Collector open)
Forward current transfer ratio *
Collector-emitter saturation voltage
Transition frequency
Turn-on time
Strage time
Fall time
VCEO
ICBO
IEBO
hFE
VCE(sat)
fT
ton
tstg
tf
IC = 25 mA, IB = 0
VCB = 100 V, IE = 0
VEB = 15 V, IC = 0
VCE = 4 V, IC = 1 A
IC = 5 A, IB = 0.1 A
VCE = 12 V, IC = 0.5 A, f = 10 MHz
IC = 5 A
IB1 = 0.1 A, IB2 = − 0.1 A
VCC = 50 V
60 V
100 µA
100 µA
300 2 000
0.5 V
30 MHz
0.3 µs
1.5 µs
0.6 µs
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2. *: Rank classification
Rank
Q
P
hFE 300 to 1200 800 to 2 000
Publication date: April 2003
SJD00212AED
1

No Preview Available !

2SD1719
PC Ta
80
(1)TC=Ta
(2)With a 50×50×2mm
Al heat sink
(3)Without heat sink
60 (PC=1.3W)
(1)
40
20
(2) (3)
0
0 40 80 120 160
Ambient temperature Ta (°C)
IC VCE
6
TC=25˚C
5
IB=10mA
4
9mA
8mA
7mA
3 6mA
5mA
4mA
2
3mA
2mA
1
1mA
0
0 2 4 6 8 10 12
Collector-emitter voltage VCE (V)
VCE(sat) IC
10
IC/IB=50
1
TC=100˚C
25˚C
–25˚C
0.1
0.01
0.1
1 10
Collector current IC (A)
VBE(sat) IC
10
IC/IB=50
1 TC=–25˚C
100˚C
25˚C
0.1
hFE IC
105
VCE=4V
104
TC=100˚C
103 25˚C
–25˚C
102
1000
100
10
1
fT IC
VCE=12V
f=10MHz
TC=25˚C
0.01
0.01
1 10
Collector current IC (A)
10
0.01
0.1 1
Collector current IC (A)
10
0.1
0.01
0.1 1
Collector current IC (A)
10
Cob VCB
104
IE=0
f=1MHz
TC=25˚C
103
102
10
ton, tstg, tf IC
100 Pulsed tw=1ms
Duty cycle=1%
IC/IB=50
(IB1=–IB2)
VCC=50V
10 TC=25˚C
tstg
1 tf
ton
0.1
Safe operation area
100 Non repetitive pulse
TC=25˚C
ICP
10
IC
t=1ms
t=10ms
1 t=300ms
0.1
1
0.1 1 10 100
Collector-base voltage VCB (V)
0.01
0
246
Collector current IC (A)
8
0.01
1
10 100 1000
Collector-emitter voltage VCE (V)
2 SJD00212AED

No Preview Available !

Rth t
103 (1)Without heat sink
(2)With a 50×50×2mm Al heat sink
102 (1)
(2)
10
1
101
102
104
103
102
101
1
10 102 103 104
Time t (s)
2SD1719
SJD00212AED
3

No Preview Available !

Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government
if any of the products or technologies described in this material and controlled under the "Foreign
Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteris-
tics and applied circuits examples of the products. It neither warrants non-infringement of intellec-
tual property right or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the
product or technologies as described in this material.
(4) The products described in this material are intended to be used for standard applications or general
electronic equipment (such as office equipment, communications equipment, measuring instru-
ments and household appliances).
Consult our sales staff in advance for information on the following applications:
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
Any applications other than the standard applications intended.
(5) The products and product specifications described in this material are subject to change without
notice for modification and/or improvement. At the final stage of your design, purchasing, or use of
the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that
the latest specifications satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maxi-
mum rating, the range of operating power supply voltage, and heat radiation characteristics. Other-
wise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of
incidence of break down and failure mode, possible to occur to semiconductor products. Measures
on the systems such as redundant design, arresting the spread of fire or preventing glitch are
recommended in order to prevent physical injury, fire, social damages, for example, by using the
products.
(7) When using products for which damp-proof packing is required, observe the conditions (including
shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets
are individually exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL