T-51512D121J-FW-A-AB.pdf 데이터시트 (총 18 페이지) - 파일 다운로드 T-51512D121J-FW-A-AB 데이타시트 다운로드

No Preview Available !

heet4U.comType No.
LCD Module Technical Specification
T-51512D121J-FW-A-AB
First Edition
Mar 7, 2005
Final Revision
******
www.DataS Approved by (Quality Assurance Division)
Checked by (ACI Engineering Division)
omPrepared by (ACI Engineering Division)
U.cNo. Item
t4-- CONTENTS
e1 APPLICATION
e2 OVERVIEW
h3 ABSOLUTE MAXIMUM RATINGS
S4 ELECTRICAL CHARACTERISTICS
ta5 INTERFACE PIN CONNECTION
a6 INTERFACE TIMING
7 BLOCK DIAGRAM
.D8 MECHANICAL SPECIFICATION
w9 OPTICAL CHARACTERISTICS
w10 RELIABILITY TEST CONDITION
w11 INSPECTION STANDARDS
Page
1
2
3
4
4
7
9
13
14
16
18
19
12 HANDLING PRECAUTIONS FOR TFT-LCD MODULE
.com-- PACKAGING SPECIFICATION
U-- PRODUCTS NUMBER LABELING FORMS
et4-- LAMP UNIT FOR 12.1” SVGA
20
23
27
29
www.DataSheT-51512D121J-FW-A-AB (AB) No. 2005-0277
OPTREX CORPORATION
Page 1/34

No Preview Available !

1. APPLICATION
This specification applies to color TFT-LCD module, T-51512D121J-FW-A-AB.
These specification papers are the proprietary product of OPTREX and include materials protected
under copyright of OPTREX. No part of this document may be reproduced in any form or by any
means without the express written permission of OPTREX.
OPTREX does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a product specified in this document. No
license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual
property rights of OPTREX or of others.
OPTREX classifies the usage of the TFT-LCD module as follows. Please confirm the usage before
using the product.
(1) Standard Usage
Computers, office equipment, factory automation equipment, test and measurement
equipment, communications, transportation equipment(automobiles, ships, trains, etc.),
provided, however, that operation is not influenced by TFT-LCD directly.
(2) Special Usage
Medical equipment, safety equipment, transportation equipment, provided, however, that
TFT-LCD is necessary to its operation.
(3) Specific Usage
Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control
systems, life support systems and any other equipment. OPTREX should make a contract
that stipulate apportionment of responsibilities between OPTREX and our customer.
The product specified in this document is designed for “Standard Usage” unless otherwise specified
in this document. If customers intend to use the product for applications other than those specified
for “Standard Usage”, they should contact OPTREX sales representative in advance.
OPTREX has been making continuous effort to improve the reliability of its products. Customers
should implement sufficient reliability design of their application equipments such as redundant
system design, fail-safe functions, anti-failure features.
OPTREX assumes no responsibility for any damage resulting from the use of the product that does
not comply with the instructions and the precautions specified in this document.
Please contact and consult a OPTREX sales representative for any questions regarding this product.
T-51512D121J-FW-A-AB (AB) No. 2005-0277
OPTREX CORPORATION
Page 2/34

No Preview Available !

2. OVERVIEW
T-51512D121J-FW-A-AB is 12.1” color TFT-LCD (Thin Film Transistor Liquid Crystal Display)
module composed of LCD panel, driver ICs, control circuit, and backlight unit.
By applying 6 bit digital data, 800 × 600, 260 K-color images are displayed on the 12.1” diagonal
screen. Input power voltage is single 3.3V or 5.0V for LCD driving.
The type of data and control signals are digital and transmitted via CMOS interface per Typ. 40
MHz clock cycle.
Inverter for backlight is not included in this module. General specifications are summarized in the
following table:
ITEM
SPECIFICATION
Display Area (mm)
246.0(H) × 184.5(V)
(12.106-inch diagonal)
Number of Dots
800 × 3 (H) × 600 (V)
Pixel Pitch (mm)
0.3075 (H) × 0.3075 (V)
Color Pixel Arrangement
RGB vertical stripe
Display Mode
Normally white TN
Number of Color
260 K
Brightness (cd/m2)
400
Wide Viewing Angle Technology
Optical compensation film
Surface Treatment
Antiglare and hard-coating 3H
Viewing Angle (CR 10)
-6565° (H) -75~45° (V)
Electrical Interface
CMOS
Optimum Viewing Angle(Contrast ratio)
6 o’clock
Module Size (mm)
280.0 (W) × 210.0 (H) × 12.0 (D)
Module Mass (g)
720
Backlight Unit
CCFL, 2-tubes, edge-light, replaceable
Characteristic value without any note is typical value.
T-51512D121J-FW-A-AB (AB) No. 2005-0277
OPTREX CORPORATION
Page 3/34