T-51863D150J-FW-A-AD.pdf 데이터시트 (총 20 페이지) - 파일 다운로드 T-51863D150J-FW-A-AD 데이타시트 다운로드

No Preview Available !

m First Edition
o Dec 23, 2004
t4U.cLCD Module Technical Specification
Final Revision
******
SheeType No. T-51863D150J-FW-A-AD
www.Data Approved by (Quality Assurance Division)
U.comNo. Item
t4-- CONTENTS
e1 APPLICATION
e2 OVERVIEW
h3 ABSOLUTE MAXIMUM RATINGS
S4 ELECTRICAL CHARACTERISTICS
ta5 INTERFACE PIN CONNECTION
a6 INTERFACE TIMING
7 BLOCK DIAGRAM
.D8 MECHANICAL SPECIFICATION
w9 OPTICAL CHARACTERISTICS
10 RELIABILITY TEST CONDITION
ww11 INSPECTION STANDARDS
Checked by (ACI Engineering Division)
Prepared by (ACI Engineering Division)
Page
1
2
3
4
4
7
10
15
16
18
20
21
12 HANDLING PRECAUTIONS FOR TFT-LCD MODULE
om-- PACKAGING SPECIFICATION
U.c-- PROUCTS NUMBER LABELING FORMS
t4-- LAMP UNIT FOR 15.0” XGA
22
25
29
31
www.DataSheeT-51863D150J-FW-A-AD (AD) No. 2004-0191
OPTREX CORPORATION
Page 1/37

No Preview Available !

1. APPLICATION
This specification applies to color TFT-LCD module, T-51863D150J-FW-A-AD.
These specification papers are the proprietary product of OPTREX and include materials protected
under copyright of OPTREX. No part of this document may be reproduced in any form or by any
means without the express written permission of OPTREX.
OPTREX does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a product specified in this document. No
license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual
property rights of OPTREX or of others.
OPTREX classifies the usage of the TFT-LCD module as follows. Please confirm the usage before
using the product.
(1) Standard Usage
Computers, office equipment, factory automation equipment, test and measurement
equipment, communications, transportation equipment(automobiles, ships, trains, etc.),
provided, however, that operation is not influenced by TFT-LCD directly.
(2) Special Usage
Medical equipment, safety equipment, transportation equipment, provided, however, that
TFT-LCD is necessary to its operation.
(3) Specific Usage
Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control systems,
life support systems and any other equipment. OPTREX should make a contract that
stipulate apportionment of responsibilities between OPTREX and our customer.
The product specified in this document is designed for “Standard Usage” unless otherwise specified
in this document. If customers intend to use the product for applications other than those specified
for “Standard Usage”, they should contact OPTREX sales representative in advance.
OPTREX has been making continuous effort to improve the reliability of its products. Customers
should implement sufficient reliability design of their application equipments such as redundant
system design, fail-safe functions, anti-failure features.
OPTREX assumes no responsibility for any damage resulting from the use of the product that does
not comply with the instructions and the precautions specified in this document.
Please contact and consult a OPTREX sales representative for any questions regarding this product.
T-51863D150J-FW-A-AD (AD) No. 2004-0191
OPTREX CORPORATION
Page 2/37

No Preview Available !

2. OVERVIEW
T-51863D150J-FW-A-AD is 15.0” color TFT-LCD (Thin Film Transistor Liquid Crystal Display)
modules composed of LCD panel, driver ICs, control circuit, and backlight unit.
By applying 6 bit or 8 bit digital data, 1024 × 768, 260K-color or 16.7M-color images are displayed on
the 15.0” diagonal screen. Input power voltage is 3.3 V for LCD driving.
The type of data and control signals are digital and transmitted via LVDS interface per Typ. 65 MHz
clock cycle.
Inverter for backlight is not included in this module. General specifications are summarized in the
following table:
ITEM
SPECIFICATION
Display Area (mm)
304.1 (H) × 228.1 (V)
(15.0-inch diagonal)
Number of Dots
1024 × 3 (H) × 768 (V)
Pixel Pitch (mm)
0.297 (H) × 0.297 (V)
Color Pixel Arrangement
RGB vertical stripe
Display Mode
Normally white TN
Number of Color
260K(6 bit/color)16.7M(8 bit/color)
Brightness (cd/m2)
400
Wide Viewing Angle Technology
Optical Compensation Film
Viewing Angle (CR 10)
-85~85° (H) -80~70° (V)
Surface Treatment
Low-reflection and hard-coating 2H
Electrical Interface
LVDS(6 bit/8 bit)
Optimum Viewing Angle(Contrast ratio)
6 o’clock
Module Size (mm)
326.0 (W) × 255.0 (H) × 15.9 (D)
Module Mass (g)
1310
Backlight Unit
CCFL, 4-tubes, edge-light, replaceable
Characteristic value without any note is typical value.
T-51863D150J-FW-A-AD (AD) No. 2004-0191
OPTREX CORPORATION
Page 3/37