F-51852GNFJ-SLW-AEN.pdf 데이터시트 (총 23 페이지) - 파일 다운로드 F-51852GNFJ-SLW-AEN 데이타시트 다운로드

No Preview Available !

U.comLCD Module Technical Specification
Sheet4Type No. F-51852GNFJ-SLW-AEN
First Edition
Mar 4, 2005
Final Revision
******
w.Data Approved by (Quality Assurance Division)
ww )
Checked by (ACI Engineering Division)
)
T.Yuchi omPrepared by (ACI Engineering Division)
Table of Contents t4U.c1. General Specifications .................................................................................................................................. 2
2. Electrical Specifications ............................................................................................................................... 3
e3. Optical Specifications ................................................................................................................................. 13
e4. I/O Terminal.................................................................................................................................................... 15
5. Test................................................................................................................................................................... 17
h6. Appearance Standards................................................................................................................................ 18
S7. Code System of Production Lot............................................................................................................... 21
8. Type Number.................................................................................................................................................. 21
ta9. Applying Precautions .................................................................................................................................. 21
10. Precautions Relating Product Handling................................................................................................ 22
a11. Warranty ........................................................................................................................................................ 23
RevisionwHiwstowry .DRev. Date
Page
Comment
F-51852GNFJ-SLW-AEN (AE) No. 2005-0268
www.DataSheet4U.comOPTREX CORPORATION
Page 1/23

No Preview Available !

1.General Specifications
Operating Temp.
: min. -20°C ~max. 70°C
Storage Temp.
: min. -30°C ~max. 80°C
Dot Pixels
: 128 (W) 64 (H) dots
Dot Size
: 0.484 (W) 0.484 (H) mm
Dot Pitch
: 0.499 (W) 0.499 (H) mm
Viewing Area
: 69.0 (W) 36.5 (H) mm
Outline Dimensions : 89.7 (W) 49.8* (H) 11.8 (D) mm
* Without Flat Cable and LED Cable
Weight
: 41.2g max.
LCD Type
: NSD-22662
( F-STN / Black &White-mode / Transflective )
Viewing Angle
: 6:00
Data Transfer
: 8-bit parallel data transfer
Serial data transfer
Backlight
: LED Backlight / White
Additional Spec.
: Winter White Display
(Highly Reflective Type Transflective Display)
Drawing
: Dimensional Outline UE-312414
RoHS regulation
: To our best knowledge, this product satisfies material
requirement of RoHS regulation.
Our company is doing the best efforts to obtain
the equivalent certificate from our suppliers.
F-51852GNFJ-SLW-AEN (AE) No. 2005-0268
OPTREX CORPORATION
Page 2/23

No Preview Available !

2.Electrical Specifications
2.1.Absolute Maximum Ratings
Parameter
Supply Voltage
(Logic)
Supply Voltage
(Booster Circuit)
Symbol
VDD-VSS
VSS2
Supply Voltage 1 V5,VOUT
(LCD Drive)
Supply Voltage 2 V1, V 2, V 3, V
(LCD Drive)
4
Input Voltage
VIN
Conditions
-
With Double *1
With Triple *1
With Quad *1
*1
*1
-
Min.
-0.3
-7.0
-6.0
-4.5
-18.0
V5
-0.3
Max.
7.0
VSS=0V
Units
V
+0.3
+0.3
+0.3
+0.3
V
V
+0.3
V
VDD+0.3
V
Output Voltage
VO
-
-0.3
VDD+0.3
V
*1 Relative to VDD.
The relation of VDDV1V2V3V4V5>VOUT ;VDD>VSSVOUT must be maintained.
In case of inputting external LCD driving voltage, LCD drive voltage should start supplying toNJU6676
at the mean time of turning on VDD power supply or after turned on VDD.
In use of the voltage boost circuit, the condition that the supply voltage : 18VVDD-VOUT is necessary.
Decoupling capacitor should be connected between VDD and VSS due to the stabilized operation for
the voltage converter.
2.2.DC Characteristics
Ta=25°C, VSS=0V
Parameter
Symbol
Conditions
Min.
Typ.
Max.
Units
Supply Voltage
VDD-VSS
-
2.2 - 5.5 V
(Logic) *1
Supply Voltage
VSS2
*2
-6.0 - -2.5 V
(Booster Circuit)
Supply Voltage
V5
*2
-18.0
-
-6.0 V
(LCD Drive)
V1, V 2
*2
0.4×V5
-
VDD
V
V 3, V 4
*2
V5
-
0.6×V5
V
Supply Voltage
VSS2
With Triple *2
-6.0
-
-2.5 V
(Booster Circuit)
With Quad *2
-4.5
-
-2.5
Booster Output
VOUT
*2
-18.0
-
-V
Voltage
Voltage Regulator VOUT2 Voltage converter off
-18.0
-
-6.0 V
Operating Voltage
External power supply
Voltage Follower
V5 Voltage regulator off
-18.0
-
-6.0 V
Operating Voltage
External power supply
Base Voltage
VREG% VDD=3.0V
- - 3.0 %
"High" Level
Input Voltage
"Low" Level
Input Voltage
VIH
VIL
-
0.8× VD D
-
VDD
V
-
VSS
-
0.2× VD D
V
F-51852GNFJ-SLW-AEN (AE) No. 2005-0268
OPTREX CORPORATION
Page 3/23