T-51516D150J-FW_A_AA.pdf 데이터시트 (총 20 페이지) - 파일 다운로드 T-51516D150J-FW_A_AA 데이타시트 다운로드

No Preview Available !

First Edition
Jan 16, 2002
Final Revision
******
OPTREX LCD Module Technical Specification
T-51516D150J-FW-A-AA
Checked by (Quality Assurance Div.)
Checked by (Design Engineering Div.)
Table of Contents
Prepared by (Production Div.)
1. Overview .................................................................................................................................................. 2
2. Absolute Maximum Ratings ........................................................................................................ 3
3. Electrical Characteristics .............................................................................................................. 3
4. Interface Pin Connection............................................................................................................... 5
5. Interface Timing ................................................................................................................................. 7
6. Block Diagram .................................................................................................................................... 11
7. Mechanical Specification............................................................................................................... 12
8. Optical Characteristics ................................................................................................................ 14
9. Reliability Test Condition.......................................................................................................... 16
10. Inspection Standards ...................................................................................................................... 17
11. Handling Precautions for TFT-LCD Module ................................................................. 18
Revision History
Rev. Date
Page
Comment
www.DataSheet4U.com
www.DataSheet4U.com
T-51516-D150J-FW-A-AA
www.DataSheet4U.com
OPTREX CORPORATION
Page 1/20

No Preview Available !

1. OVERVIEW
T-51516-D150J-FW-AA is 15.0” color TFT-LCD (Thin Film Transistor Liquid Crystal Display)
modules composed of LCD panel, driver ICs, control circuit, and backlight unit.
By applying 8bit digital data, 1024 ´ 768, 16.7M-color images are displayed on the 15.0” diagonal
screen. Input power voltages are 5.0 V for LCD driving.
The type of data and control signals are digital, and 2 pixel data are transmitted per Typ. 32.5
MHz clock cycle.
General specifications are summarized in the following table:
ITEM
SPECIFICATION
Display Area (mm)
Number of Dots
304.1 (H) ´ 228.1 (V)
(15.0-inch diagonal)
1024 ´ 3 (H) ´ 768 (V)
Pixel Pitch (mm)
0.297 (H) ´ 0.297 (V)
Color Pixel Arrangement
RGB vertical stripe
Display Mode
normally white TN
Number of Color
16.7 M (8 bits/color)
Brightness
300 cd/m2 Typ.
Wide Viewing Angle Technology
Optical Compensation Film
Viewing Angle
-75~75° (H) -60~50° (V)
Surface Treatment
Anti-glare and hard-coating 3H
Electrical Interface
CMOS (VI = 3~5 V, 2pixel / clock)
Optimum Viewing Angle(Contrast ratio)
6 o’clock
Module Size (mm)
350.0 (W) ´ 266.5 (H) ´ 16.8 (D)
Module Mass (g)
1500
Backlight Unit
CCFL, 4-tubes, edge-light, replaceable
Characteristic value without any note is typical value.
The LCD product described in this specification is designed and manufactured for the standard
use in OA equipment and consumer products, such as computers, communication equipment,
industrial robots, AV equipment and so on.
Do not use the LCD product for the equipment that require the extreme high level of reliability,
such as aerospace applications, submarine cables, nuclear power control systems and medical
or other equipment for life support.
ADI assumes no responsibility for any damage resulting from the use of the LCD product in
disregard of the conditions and handling precautions in this specification.
If customers intend to use the LCD product for the above items or other no standard items,
please contact our sales persons in advance.
T-51516-D150J-FW-A-AA
OPTREX CORPORATION
Page 2/20

No Preview Available !

2. ABSOLUTE MAXIMUM RATINGS
ITEM
SYMBOL
MIN.
MAX.
UNIT
Power Supply Voltage for LCD
VCC
0
7.0
V
Logic Input Voltage
VI -0.5 6.1
V
Lamp Voltage
VL
0
2500
Vrms
Lamp Current
IL 0 10.0 mArms
Lamp Frequency
FL -- 100 kHz
Operation Temperature *)
Top
0
50 °C
Storage Temperature *) Tstg -20 60 °C
[Note]
*) Top,Tstg £ 40°C : 90% RH max. without condensation
Top,Tstg > 40°C : Absolute humidity shall be less than the value of 90% RH at 40°C without
condensation.
3. ELECTRICAL CHARACTERISTICS
(1) TFT- LCD
ITEM
SYMBOL MIN. TYP.
Ambient Temperature : Ta = 25°C
MAX. UNIT
Remarks
Power Supply Voltages for LCD VCC
4.5 5.0
5.5
V
*1)
Power Supply Currents for LCD ICC
-- 300 500
mA
*2)
Permissive Input Ripple Voltage VRP -- -- 100 mVp-p VCC = +5.0V
Logic Input
High
VIH
2.2 3.3
5.5
V
Voltage
Low
VIL 0 -- 0.8
V
*1) Power and signals sequence:
t1 £ 10 ms
0 < t2 £ 10 ms
0 < t3 £ 1 s
0 < t4 £ 50 ms
1 s £ t5
200 ms £ t6
0 £ t7
4.5V
LCD Power Supply
Logic Signal 0.5V
VCC
data
4.5V
2.2V
0.5V
t1 t2
t3 t4 t5
VL
Backlight Power Supply
t6 t7
Data: RGB DATA, DCLK, HD, VD, DENA
,
T-51516-D150J-FW-A-AA
OPTREX CORPORATION
Page 3/20

No Preview Available !

VCC-dip conditions:
1) When VCCMIN ³ 3.6 V, td £ 10 ms
2) When VCCMIN < 3.6 V
VCC-dip conditions should also follow the power and signals sequence.
VCC
td
*2) Typical current condition:
256- gray- bar-pattern
768 line mode
VCC = 5.0 V, fH=48.4kHz, fV=60Hz, fCLK= 32.5MHz
(2) Backlight
ITEM
SYMBOL MIN. TYP. MAX. UNIT
Ta = 25°C
Remarks
Lamp Voltage
VL -- 570 -- Vrms IL = 12.0 mArms
Lamp Current
IL 7.0 12.0 16.0 mArms
*1)
Lamp Frequency
FL 40 -- 70 kHz
*2)
Starting Lamp Voltage
Lamp Life Time
VS
LT
1400
--
-- Vrms
Ta = 0°C
1200
--
-- Vrms
Ta = 25°C
--
50000
--
*3), IL = 12.0 mArms,
h Continuous
Operation
*1) Lamp Current measurement method (The current meter is inserted in low voltage line.)
CTL
A
LCD
Module
CTH
CTH
CTL
CTH
CTH
A
Inverter
Power
Supply
*2) Lamp frequency of inverter may produce interference with horizontal synchronous frequency,
and this may cause horizontal beat on the display. Therefore, please adjust lamp frequency,
and keep inverter as far from module as possible or use electronic shielding between inverter
and module to avoid the interference.
*3) Lamp life time is defined as the time either when the brightness becomes 50% of the initial
value, or when the starting lamp voltage does not meet the value specified in this table.
T-51516-D150J-FW-A-AA
OPTREX CORPORATION
Page 4/20

No Preview Available !

4. INTERFACE PIN CONNECTION
(1) CN 1(Data Signal and Power Supply)
Used Connector: IL-FHR-45S-HF (JAE)
Pin No. Symbol
Function
1 GND
2 DCLK Dot Clock
3 GND
4 DENA Data enable
5 GND
6 VD Vertical Sync
7 GND
8 HD Horizontal Sync
9 GND
10 NC This pin should be open or GND.
11 GND
12 BO7 Blue odd data(MSB)
13 BO6 Blue odd data
14 BO5 Blue odd data
15 BO4 Blue odd data
16 GND
17 BO3 Blue odd data
18 BO2 Blue odd data
19 BO1 Blue odd data
20 BO0 Blue odd data(LSB)
21 GND
22 GO7 Green odd data(MSB)
23 GO6 Green odd data
24 GO5 Green odd data
25 GO4 Green odd data
26 GND
27 GO3 Green odd data
28 GO2 Green odd data
29 GO1 Green odd data
30 GO0 Green odd data(LSB)
31 GND
32 RO7 Red odd data(MSB)
33 RO6 Red odd data
34 RO5 Red odd data
35 RO4 Red odd data
36 GND
37 RO3 Red odd data
38 RO2 Red odd data
39 RO1 Red odd data
40 RO0 Red odd data(LSB)
41 VCC
42 VCC
43 TEST This pin should be open. Test signal output for only internal test use.
44 TEST This pin should be open. Test signal output for only internal test use.
45 TEST This pin should be open. Test signal output for only internal test use.
T-51516-D150J-FW-A-AA
OPTREX CORPORATION
Page 5/20