X60008B-41.pdf 데이터시트 (총 14 페이지) - 파일 다운로드 X60008B-41 데이타시트 다운로드

No Preview Available !

X60008B-41, X60008C-41, X60008D-41
®
Data Sheet
March 14, 2005
FN8142.0
Precision 4.096V FGA™ Voltage
Reference
DESCRIPTION
The X60008-41 FGA™ voltage references are very
FEATURES
high precision analog voltage references fabricated in
Intersil’s proprietary Floating Gate Analog technology,
• Output Voltage: 4.096V
• Absolute Initial Accuracy Options:
±0.5mV & ±1.0mV
which achieves superior levels of performance when
compared to conventional band gap, buried zener, or
XFET™ technologies.
• Ultra Low Power Supply Current: 500nA
• Low Temperature Coefficient options:
m3, 5 & 10ppm/°C
• 10 mA Source & Sink Current Capability
o• 10 ppm/1000hrs Long Term Stability
.c• Very Low Dropout Voltage: 100 mV @ no load
• Supply Voltage Range: 4.5V to 9.0V
U• 5kV ESD (Human Body Model)
• Standard Package: SOIC-8
t4• Temp Range: -40°C to +85°C
FGA™ voltage references feature very high initial
accuracy, very low temperature coefficient, excellent
long term stability, low noise and excellent line and
load regulation, at the lowest power consumption
currently available. These voltage references enable
advanced applications for precision industrial &
portable systems operating at significantly higher
accuracy and lower power levels than can be achieved
with conventional technologies.
eAPPLICATIONS
e• High Resolution A/Ds & D/As
h• Digital Meters
• Calibration Systems
S• V-F Converters
• Precision Current Sources
• Precision Regulators
• Precision Oscillators
• Battery Management Systems
• Smart sensors
• Strain Gage Bridges
• Threshold Detectors
• Servo Systems
taTYPICAL APPLICATION
www.Da eet4U.comVIN=+5.0V
VIN VOUT
X60008-41
GND
0.1µF
Serial
Bus
10µF
0.001µF(*)
REF IN
Enable
SCK
SDAT
16 to 24-bit
A/D Converter
ataSh(*)Also see Figure 3 in Applications Information
www.D1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.

No Preview Available !

PACKAGE DIAGRAM
X60008B-41, X60008C-41, X60008D-41
GND
VIN
DNC
GND
X60008-XX
SOIC
18
27
36
45
DNC
DNC
VOUT
DNC
PIN CONFIGURATIONS
Pin Name
GND
VIN
VOUT
DNC
Description
Ground Connection
Power Supply Input Connection
Voltage Reference Output Connection
Do Not Connect; Internal Connection – Must Be Left Floating
ORDERING INFORMATION
X 60008 X I S8 – 41
Logo
Device Part Number 60008 = Standard
Grade
B = ±0.5 mV, 3 ppm/°C
C = ±0.5 mV, 5 ppm/°C
D = ±1.0 mV, 10 ppm/°C
Temperature Range I = -40°C to +85°C
Package
S8 = 8 lead SOIC
VOUT Option
41 = 4.096V
2 FN8142.0
March 14, 2005

No Preview Available !

X60008B-41, X60008C-41, X60008D-41
ABSOLUTE MAXIMUM RATINGS
Storage Temperature Range............. -65°C to +125°C
Voltage on any Pin
Referenced to Gnd............................. -0.5V to +10V
Voltage on “DNC” pins.........No connections permitted
to these pins.
Lead Temperature (soldering, 10 secs)........... +225°C
RECOMMENDED OPERATING CONDITIONS
Temperature
Industrial
Min.
-40°C
Max.
+85°C
COMMENT
Absolute Maximum Ratings indicate limits beyond
which permanent damage to the device and impaired
reliability may occur. These are stress ratings provided
for information only and functional operation of the
device at these or any other conditions beyond those
indicated in the operational sections of this specifica-
tion are not implied.
For guaranteed specifications and test conditions, see
Electrical Characteristics.
The guaranteed specifications apply only for the test
conditions listed. Some performance characteristics
may degrade when the device is not operated under
the listed test conditions.
ELECTRICAL CHARACTERISTICS
(Operating Conditions: VIN = 5.0V, IOUT = 0mA, COUT = 0.001µF, TA = -40 to +85°C unless otherwise specified.)
Symbol
Parameter
Conditions
Min Typ Max
Units
VOUT
VOA
Output Voltage
VOUT Accuracy
X60008B-41
X60008C-41
X60008D-41
TA = 25°C
4.096
-0.50
-0.50
-1.00
+0.50
+0.50
+1.00
V
mV
IIN
VIN
TC VOUT
VOUT/VIN
VOUT/IOUT
VOUT/t
VOUT/TA
ISC
VN
Supply Current
Input Voltage Range
Output Voltage
Temperature Coefficient(1)
Line Regulation
Load Regulation
Long Term Stability
Thermal Hysteresis(2)
Short Circuit Current(3)
Output Voltage Noise
X60008B-41
X60008C-41
X60008D-41
+4.75V VIN +8.0V
0mA ISOURCE 10mA
-10mA ISINK 0mA
TA = 25°C
T = -40°C to +85°C
TA = 25°C
0.1Hz to 10Hz
500 800
nA
4.5 9.0 V
3 ppm/°C
5
10
150 µV/V
10 50
20 100
µV/mA
10 ppm/1000Hrs
50 ppm
50 80
30
mA
µVpp
Note:
1. Over the specified temperature range. Temperature coefficient is measured by the box method whereby the change in VOUT is divided
by the temperature range; in this case, -40°C to +85°C = 125°C.
2. Thermal Hysteresis is the change in VOUT created by package stress @ TA = 25°C after temperature cycling. VOUT is read initially at
TA = 25°C; the X60008 is then cycled between Hot (85°C) and Cold (-40°C) before a second VOUT measurement is taken at 25°C. The
deviation between the initial VOUT reading and the second VOUT reading is then expressed in ppm.
3. Guaranteed by Device Characterization
3 FN8142.0
March 14, 2005

No Preview Available !

X60008B-41, X60008C-41, X60008D-41
TYPICAL PERFORMANCE CHARACTERISTIC CURVES
(VIN = 5.0V, IOUT = 0mA, TA = 25°C unless otherwise specified)
LINE REGULATION
300
250
200
150
-40°C
+25°C
+85°C
100
50
0
-50
-100
4.5 5 5.5 6 6.5 7 7.5 8 8.5 9
VIN (V)
4.0963
4.09625
4.0962
4.09615
4.0961
4.09605
4.096
4.09595
4.0959
4.5
LINE REGULATION
(3 Representative Units)
Unit 2,
IIN = 520nA
Unit 3,
IIN = 700nA
Unit 1,
IIN = 360nA
5.5 6.5 7.5 8.5
VIN (V)
4 FN8142.0
March 14, 2005

No Preview Available !

X60008B-41, X60008C-41, X60008D-41
TYPICAL PERFORMANCE CHARACTERISTIC CURVES
(VIN = 5.0V, IOUT = 0mA, TA = 25°C unless otherwise specified)
LOAD REGULATION
0.6
0.5
0.4
+85°C
0.3
+25°C
0.2
-40°C
0.1
0.0
-0.1
-20
-15
SINKING
-10
-5 0 5
OUTPUT CURRENT (mA)
10 15 20
SOURCING
0.1Hz to 10Hz VOUT NOISE
Band Pass Filter with 1 zero at .1Hz and 2 poles at 10 Hz
1 Sec/div
5
FN8142.0
March 14, 2005