NANOSMDM100.pdf 데이터시트 (총 1 페이지) - 파일 다운로드 NANOSMDM100 데이타시트 다운로드

No Preview Available !

Tyco / Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: 800-227-4856
Fax: 800-227-4866
PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: nanoSMDM100
DOCUMENT: SCD 24572
PCN: 974958
REV LETTER: E
REV DATE: AUGUST 10, 2001
PAGE NO.: 1 OF 1
Specification Status: Released
Maximum Electrical Rating
Voltage: 6.0VDC MAX
Current: 40A
Notes:
1. All terminations are gold plated.
Partial coverage of plating with solder may occur
without effect on solderability or electrical performance
2. Devices cannot be wave soldered.
3. Drawing not to scale.
Marking:
100
Manufacturer's Mark
Part Identification
TABLE I. DIMENSIONS:
AB C D
MIN MAX MIN MAX MIN MAX MIN MAX
mm: 3.0 3.4 0.8 1.2 1.4 1.8 0.75 1.05
in:* (0.118) (0.134) (0.032) (0.047) (0.055) (0.071) (0.030) (0.041)
*Rounded off approximation
TABLE II. PERFORMANCE RATINGS:
CURRENT RATINGS**
AMPERES
AT 0°C
HOLD TRIP
1.15 2.07
AMPERES
AT 25°C
HOLD TRIP
1.00 1.80
AMPERES
AT 60°C
HOLD TRIP
0.70 1.26
TIME TO
TRIP **
SECONDS
AT 25°C, 8.0A
MAX
0.30
RESISTANCE
VALUES
OHMS
AT 25°C
MIN MAX*
0.06 0.21
TRIPPED-STATE
POWER
DISSIPATION**
WATTS AT
25°C, 6.0V
MAX
0.6
*Maximum resistance is measured 1 hour after reflow.
** Values specified were determined using PCB’s with 0.030”X1.5 ounce copper traces.
Reference Documents:
Precedence:
Effectivity:
CAUTION:
PS300
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
www.DataSheet4U.com
www.DataSheet4U.com
www.DataSheet4U.com