DFX-8500.pdf 데이터시트 (총 14 페이지) - 파일 다운로드 DFX-8500 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.com
EPSON DFX-8500
front cover
control panel
power
switch
sprockets*
* front tractor unit parts
paper supports*
sprockets**
top cover
ribbon
cartridge
paper supports**
** rear tractor unit parts
paper bail
print head
paper separator cover
paper
separator
rear flap
rear cover
serial interface
parallel interface
Accessories
Ribbon cartridge
Use the #8766 EPSON replacement cartridge only
Printer Specifications
Printing
Printing method:
9-pin impact dot matrix
Printing speed:
Characters per inch
10 cpi
10 cpi
10 cpi
12 cpi
12 cpi
Quality
High-speed draft
Normal draft
Near letter quality
Draft
Near letter quality
Characters/second/line
1120
840
210
1008
252
Printing direction:
Bidirectional logic seeking for text and
graphics printing. Unidirectional text or
graphics printing can be selected using
software commands.
Line spacing:
1/6-inch or programmable increments of
1/216-inch
Paper feed speed: Continuous
0.25/m/sec/line (9.9 inches per second)
Note:
Paper feed speed drops to 6 inches per second when the
optional pull tractor is mounted.
Printable columns:
Characters per inch Maximum printed characters per column
10 cpi
136
12 cpi
163
15 cpi
204
17 cpi
233
20 cpi
272
Buffer:
Character fonts:
128KB or 0KB (DIP switch selectable)
Characters per inch available
Font
Available pitches (cpi)
EPSON Super Draft
10
EPSON Draft
10, 12, 15
EPSON Roman (NLQ) 10, 12, 15, proportional
EPSON Sans serif (NLQ) 10, 12, 15, proportional
5/98
EPSON DFX-8500 - 1

No Preview Available !

www.DataSheet4U.com
EPSON DFX-8500
Character tables:
Character sets:
One Italic and 10 graphical character
tables. (26 graphical character tables are
available in certain countries.)
13 international character sets
Paper
Note:
Use recycled paper, labels, envelopes, postcards, overlapping
forms, and continuous forms with labels only under normal
temperature and humidity conditions as follows:
Temperature 59° to 77°F (15° to 25°C)
Humidity
20% to 60% RH
For continuous multi-part forms:
t The form sheets of continuous multi-part forms should be
securely joined together along the left and right edges by
crimping or spot-gluing. For the best printing quality, use
multi-part forms joined with spot-gluing.
1 inch
or less
3 inches
or less
spot-gluing
crimping
printing side
spot-gluing
and crimping
on each side
t When using crimped multi-part forms, note the following:
t Crimping should be pressed in from the original sheet
side and go completely through all copy sheets.
t Crimping should be double-sided; using single-sided
crimping may cause the printer to jam.
top view
top view
t The thickness of the folding part when extended should be
the same as or less than the total thickness.
printing side
Same as total thickness
or less
t The binding area should be flat and should have no creases.
t The sprocket holes of all sheets in the form should be
aligned properly.
t The binding position should be outside the printable area.
Width:
4 to 16 inches (101 to 406 mm)
Length/page:
4 to 17 inches (101 to 431 mm)
Number of copies: Front 7 sheets (1 original + 6 copies)
Rear 6 sheets (1 original + 5 copies)
Total thickness:
Front 0.021 inch (0.53 mm) maximum
Rear 0.018 inch (0.46 mm) maximum
Weight:
Single sheets
14 to 22 lb (52.6 to 82.7 g/m2)
Multi-part forms
11 to 15 lb (41.4 to 56.4 g/m2) (weight/
part) and within the total thickness
Quality:
Plain, recycled, and carbonless paper
Printable area:
printable area
B
printable area
A
side view
side view
t Never use continuous multi-part forms that are joined with
metal staples or bar-gluing.
bar-gluing
metal
stapling
C
C
A The minimum top margin (below the perforation) is 0.1 inch
(2.6 mm).
B The minimum bottom margin (above the perforation) is 0.165 inch
(4.2 mm).
C The minimum left or right margin is 0.51 inch (13 mm).
The maximum printable width is 13.6 inches (345.4 mm).
Note:
Position the sprockets or set your application software so that
the printer does not print outside the printable area.
2 - EPSON DFX-8500
5/98

No Preview Available !

www.DataSheet4U.com
EPSON DFX-8500
Labels
Size:
Total thickness:
Quality:
2.5 inches W × 15/16 inch H
(63.5 mm W × 23.8 mm H)
4 inches W × 15/16 inch H
(101 mm W × 23.8 mm H)
4 inches W × 17/16 inch H
(101 mm W × 27.0 mm H)
0.0075 inch (0.19 mm) maximum
The difference in thickness must be less
than 0.0047 inch (0.12 mm).
Plain paper or the same quality labels with
continuous backing sheet
Pre-printed paper
Pre-printed paper is paper with white space in the middle and
ruled lines, letters, or figures printed in the top and bottom
margins. The margins are printed the first time the paper is
loaded in the printer, and a document is printed in the white
space the second time the paper is loaded in the printer. The
margin areas are often used for letterheads, borders, and so on.
You can make your own pre-printed paper or you can
purchase it.
You cannot preprint in the area with the diagonal shading
shown in the illustrations below, and you can preprint only
with colors whose reflectivity is under 60% (for instance
black). Avoid punching holes in the restricted area shown
below because punctures are also recognized as colors whose
reflectivity is under 60%.
Before printing on pre-printed sheets, verify that the area your
document will print on does not overlap the pre-printed area
by printing separate sample sheets and comparing their
printed areas.
12mm
12mm
12mm
12mm
continuous paper
Mechanical
Paper feed
methods:
Push tractor (front and rear)
Push-pull feed with optional pull tractor
Total print
volume:
26 million lines (except print head)
Print head life: 400 million characters
Ribbon:
Cartridge ribbon, available in black only
(#8766). Do not use ribbons for 24-pin
printers.
Ribbon life expectancy is 15 million
characters (at 14 dots/character).
Dimensions and weight:
Height:
14.5 inches (369 mm)
Width:
27.6 inches (700 mm)
Depth:
15.0 inches (382 mm)
Weight:
approx. 64 lb (29 kg)
Duty cycle:
25%
Electrical
120 V model:
Rated voltage:
AC 120 V
Input voltage range: AC 99 to 132 V
Rated frequency range: 50 to 60 Hz
Input frequency range: 49.5 to 60.5 Hz
Rated current:
3.5 A (max. 7.5 A)
Power consumption:
Approx. 160 W (ISO/IEC 10561
Letter Pattern)
Energy Star compliant
220240 V model:
Rated voltage:
AC 220 to 240 V
Input voltage range: AC 198 to 264 V
Rated frequency range: 50 to 60 Hz
Input frequency range: 49.5 to 60.5 Hz
Rated current:
1.4 A (max. 3.5 A)
Power consumption:
Approx. 160 W (ISO/IEC 10561
Letter Pattern)
Energy Star compliant
This product is also designed for IT power systems with Phase
to Phase voltage 220240V.
5/98
EPSON DFX-8500 - 3

No Preview Available !

www.DataSheet4U.com
EPSON DFX-8500
Environmental
Temperature:
Operation:
Storage:
Humidity:
Operation:
Storage:
5°C to 35°C (41°F to 95°F)
30°C to 60°C (22°F to 140°F)
10% to 80% RH without condensation
5% to 85% RH without condensation
Safety approvals
120 V model:
Safety
standards:
EMI:
230 V model:
Safety
standards:
EMI:
Acoustic noise:
UL1950 with D3
CSA C22.2 No. 950 with D3
FCC part 15 subpart B class B
CSA C108.8 class B
EN 60950 (VDE, NEMKO)
EN 55022 (CISPR pub. 22) class B
AS/NZS 3548 class B
Approx. 58 dB (A) (ISO 7779 pattern)
CE marking
230 V model:
Low Voltage Directive 73/23/EEC: EN60950
EMC Directive 89/336/EEC:
EN55022 class B
EN61000-3-2
EN61000-3-3
EN50082-1
IEC801-2
IEC801-3
IEC801-4
Parallel Interface Specifications
The printer comes with a bidirectional, 8-bit, parallel interface
and a Type-B optional interface slot.
Forward channel
Transmission mode: 8-bit parallel, IEEE-1284 compatibility
mode
Adaptable connector: 57-30360 (Amphenol) or equivalent
Synchronization:
Handshaking:
Signal level:
STROBE pulse
BUSY and ACKNLG signals
TTL compatible (IEEE-1284 level 1
device)
Reverse channel
Transmission mode: IEEE-1284 nibble mode
Adaptable connector: 57-30360 (Amphenol) or equivalent
Synchronization: Refer to the IEEE-1284 specification
Handshaking:
Refer to the IEEE-1284 specification
Signal level:
IEEE-1284 level 1 device
Data transmission
timing:
Refer to the IEEE-1284 specification
Extensibility request: The printer responds to the extensibil-
ity request in the affirmative when the
request is 00H or 04H, which means:
00H:
Request nibble mode of reverse channel
transfer
04H:
Request device ID in nibble mode of
reverse channel transfer
Serial Interface Specifications
The DFX-8500 built-in serial interface is an RS-232C
asynchronous interface with the following characteristics.
Data format:
1 start bit
Data word length: 8 bits
Odd, even, no parity, or ignore
1 or more stop bit
Signal level:
Mark logical “1” (3 V to 25 V)
Space logical “0” (+3 V to +25 V)
Handshaking: Handshaking by DTR signal or Xon/Xoff
Bit rate:
2400, 4800, 9600, 19200 bps
Connector plug: EIA 25-pin connector
4 - EPSON DFX-8500
5/98

No Preview Available !

www.DataSheet4U.com
EPSON DFX-8500
Control Panel Buttons and Lights
The control panel consists of indicator lights and buttons, and
gives you access to several powerful features.
Lights
Power
Paper Out
Ribbon
Paper Select
Font
Pitch
On when the power switch is on and
power is supplied to the printer.
On when the printer is out of paper.
Comes on when there is no paper
positioned behind the print head, even
if paper is loaded on the tractors in the
standby position.
Flashes when paper is jammed in the
printer.
Blinks when the ribbon is jammed in
the printer.
Displays the paper memory that is
registered in the printer.
The font selection status is displayed by
two font lights on the control panel:
o o Super Draft
o n Draft
n o Roman
n n Sans serif
n = on, o = off
The pitch selection status is displayed by
three pitch lights on the control panel:
oon
ono
onn
noo
non
nno
10 cpi
12 cpi
15 cpi
17 cpi
20 cpi
PS (Proportional Spacing)
n = on, o = off
Copy
TOF
(Top of Form)
Tear Off
Pause
Tractor Select
Front
Tractor Select
Rear
Buttons
Paper Select
Font
On when the printer is in copy mode
(to select darker printing).
On when the printer is in top-of-form
mode. The printer remembers any
change you make to the top-of-form
position when this light is on.
On when the printer is in tear-off mode.
The printer remembers any change you
make to the tear-off position when this
light is on.
On when printing is paused.
Blinks when the print head is hot. Press
to temporarily stop printing and resume
printing.
On when the front tractor is selected.
The light is green when paper is loaded
(even if the paper is in the standby
position), and red when the tractor is out
of paper.
On when the rear tractor is selected. The
light is green when paper is loaded (even
if the paper is in the standby position),
and red when the tractor is out of paper.
Selects one of the following paper
numbers: 1, 2, 3, 4, 5, 6, 7, 8, 0, a, or b.
Select a or b if you have registered paper
information using the DIP switches and
control panel.
Select 1 to 8 if you have registered paper
information using the paper memory
utility.
Selects one of the following fonts: Super
Draft, Draft, Roman, or Sans Serif.
5/98
EPSON DFX-8500 - 5