2SA2162.pdf 데이터시트 (총 3 페이지) - 파일 다운로드 2SA2162 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.com
Transistors
2SA2162
Silicon PNP epitaxial planar type
For general amplification
Complementary to 2SC6036
Features
Low collector-emitter saturation voltage VCE(sat)
SSS-Mini type package, allowing downsizing of the equipment and automatic
insertion through the tape packing
Absolute Maximum Ratings Ta = 25°C
Parameter
Symbol
Rating
Unit
Collector-base voltage (Emitter open)
Collector-emitter voltage (Base open)
Emitter-base voltage (Collector open)
Collector current
Peak collector current
Collector power dissipation
Junction temperature
Storage temperature
VCBO
VCEO
VEBO
IC
ICP
PC
Tj
Tstg
15 V
12 V
5 V
500 mA
1 A
100 mW
125 °C
55 to +125 °C
DataSheet4U.com
0.33+−00..0052
3
0.23+−00..0052
12
(0.40) (0.40)
0.80±0.05
1.20±0.05
Unit: mm
0.10+−00..0052
1: Base
2: Emitter
3: Collecter
SSSMini3-F1 Package
Marking Symbol : 2U
Electrical Characteristics Ta = 25°C±3°C
Parameter
Symbol
Conditions
Min Typ
Collector-base voltage (Emitter open)
VCBO IC = –10 µA, IE = 0
15
Collector-emitter voltage (Base open)
VCEO IC = –1 mA, IB = 0
12
Emitter-base voltage (Collector open)
VEBO IE = –10 µA, IC = 0
5
Collector-base cutoff current (Emitter open) ICBO VCB = –10 V, IE = 0
Forward current transfer ratio
hFE VCE = –2 V, IC = –10 mA
270
Collector-emitter saturation voltage
VCE(sat) IC = –200 mA, IB = –10 mA
Transition frequency
fT VCB = –2 V, IE = 10 mA, f = 200 MHz
200
Collector output capacitance
(Common base, input open circuited)
Cob VCB = –10 V, f = 1 MHz
4.5
Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
Max
0.1
680
250
Unit
V
V
V
µA
mV
MHz
pF
DataShee
DataSheet4U.com
Publication date : December 2004
DataSheet4 U .com
SJC00323AED
1

No Preview Available !

www.DataSheet4U.com
2SA2162
2SA2162_ PC-Ta
PC Ta
120
100
80
60
40
20
0
0 20 40 60 80 100 120 140
Ambient temperature Ta (°C)
2SA2162_ VCE(sat)-IC
VCE(sat) IC
1
IC / IB = 20
et4U.com
0.1
Ta = 85°C
25°C
25°C
0.01
0.1
−1
−10 −100 −1 000
Collector current IC (mA)
2SA2162_ IC-VCE
IC VCE
70
Ta = 25°C IB = −160 µA
60
50 140 µA
120 µA
40
100 µA
30 80 µA
20 60 µA
40 µA
10
20 µA
0
0 0.5 −1.0 −1.5 −2.0 −2.5 −3.0
Collector-emitter voltage VCE (V)
2SA2162_ hFE-IC
hFE IC
600
500 Ta = 85°C
VCE = −2V
100
90
2SA2162_ IC-VBE
IC VBE
VCE = −2 V
80
70
60
50 Ta = 85°C
40
25°C
30 25°C
20
10
0
0 0.2 0.4 0.6 0.8 −1.0 −1.2 −1.4
Base-emitter voltage VBE (V)
2SA2162_ Cob-VCB
Cob VCB
100 f = 1 MHz
Ta = 25°C
400 25°C
300 25°C
10
200DataSheet4U.com
100
DataShee
0
−1
−10
−100
−1 000
Collector current IC (mA)
1
0 5 10
Collector-base voltage VCB (V)
DataSheet4U.com
2
DataSheet4 U .com
SJC00323AED

No Preview Available !

www.DataSheet4U.com
et4U.com
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of
the products or technical information described in this material and controlled under the "Foreign Exchange
and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and
applied circuits examples of the products. It neither warrants non-infringement of intellectual property right
or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical
information as described in this material.
(4) The products described in this material are intended to be used for standard applications or general elec-
tronic equipment (such as office equipment, communications equipment, measuring instruments and house-
hold appliances).
Consult our sales staff in advance for information on the following applications:
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combus-
tion equipment, life support systems and safety devices) in which exceptional quality and reliability are
required, or if the failure or malfunction of the products may directly jeopardize life or harm the human
body.
Any applications other than the standard applications intended.
DataSheet4U.com
(5) The products and product specifications described in this material are subject to change without notice for
modification and/or improvement. At the final stage of your design, purchasing, or use of the products,
therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifica-
tions satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rat-
ing, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not
be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of
break down and failure mode, possible to occur to semiconductor products. Measures on the systems such
as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent
physical injury, fire, social damages, for example, by using the products.
(7) When using products for which damp-proof packing is required, observe the conditions (including shelf life
and amount of time let standing of unsealed items) agreed upon when specification sheets are individually
exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
DataSheet4U.com
DataSheet4 U .com
2003 SEP