2SA2118.pdf 데이터시트 (총 3 페이지) - 파일 다운로드 2SA2118 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.com
Power Transistors
2SA2118
Silicon PNP epitaxial planar type
For power amplification
For TV vertical deflection output
Features
Satisfactory linearity of forward current transfer ratio hFE
Dielectric breakdown voltage of the package: 5 kV
Full-pack package which can be installed to the heat sink with one
screw.
Absolute Maximum Ratings TC = 25°C
Parameter
Symbol Rating
Unit
Collector-base voltage (Emitter open)
Collector-emitter voltage (Base open)
Emitter-base voltage (Collector open)
Collector current
Peak collector current
Collector power
dissipation
Junction temperature
Ta = 25°C
Storage temperature
VCBO
VCEO
VEBO
IC
ICP
PC
Tj
Tstg
200
V
180
V
6 V
2 A
3 A
25 W
2.0
DataSheet4U.com
150 °C
55 to +150 °C
9.9±0.3
Unit: mm
4.6±0.2
2.9±0.2
φ 3.2±0.1
1.4±0.2
1.6±0.2
0.8±0.1
2.6±0.1
0.55±0.15
2.54±0.30
5.08±0.50
123
1: Base
2: Collector
3: Emitter
TO-220D-A1 Package
DataShee
Electrical Characteristics TC = 25°C ± 3°C
Parameter
Symbol
Conditions
Min Typ Max Unit
Collector-base voltage (Emitter open) VCBO IC = −50 µA, IE = 0
200
V
Collector-emitter voltage (Base open) VCEO IC = −5 mA, IB = 0
180
V
Emitter-base voltage (Collector open) VEBO IE = −500 µA, IC = 0
6
V
Base-emitter voltage
VBE VCE = −10 V, IC = −400 mA
1 V
Collector-base cutoff current (Emitter open) ICBO VCB = −200 V, IE = 0
50 µA
Emitter-base cutoff current (Collector open) IEBO VEB = −4 V, IC = 0
50 µA
Forward current transfer ratio
hFE1 * VCE = −10 V, IC = −150 mA
60 240
hFE2 VCE = −10 V, IC = −400 mA
50
Collector-emitter saturation voltage
VCE(sat) IC = −500 mA, IB = −50 mA
1 V
Transition frequency
fT VCE = −10 V, IC = − 0.5 A, f = 10 MHz
30
MHz
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2. *: Rank classification
Rank
Q
P
hFE1
60 to 140
100 to 240
DataSheet4U.com
Publication date: July 2004
DataSheet4 U .com
SJD00315AED
1

No Preview Available !

www.DataSheet4U.com
2SA2118
PC Ta
35
(1) TC = Ta
30
(2) With a 100 × 100 × 2 mm
Al heat sink
(3) Without heat sink
25
(1)
20
15
(2)
10
5
(3)
0
0 20 40 60 80 100 120 140 160
Ambient temperature Ta (°C)
Safe operation area
10
Non repetitive pulse, TC = 25°C
ICP
IC
1
t = 0.5 m
0.1 t = 1 ms
t = 5 ms
0.01
1
t=1s
10 100 1 000
Collector-emitter voltage VCE (V)
et4U.com
DataSheet4U.com
DataShee
DataSheet4U.com
2
DataSheet4 U .com
SJD00315AED

No Preview Available !

www.DataSheet4U.com
et4U.com
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of
the products or technical information described in this material and controlled under the "Foreign Exchange
and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and
applied circuits examples of the products. It neither warrants non-infringement of intellectual property right
or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical
information as described in this material.
(4) The products described in this material are intended to be used for standard applications or general elec-
tronic equipment (such as office equipment, communications equipment, measuring instruments and house-
hold appliances).
Consult our sales staff in advance for information on the following applications:
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combus-
tion equipment, life support systems and safety devices) in which exceptional quality and reliability are
required, or if the failure or malfunction of the products may directly jeopardize life or harm the human
body.
Any applications other than the standard applications intended.
DataSheet4U.com
(5) The products and product specifications described in this material are subject to change without notice for
modification and/or improvement. At the final stage of your design, purchasing, or use of the products,
therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifica-
tions satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rat-
ing, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not
be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of
break down and failure mode, possible to occur to semiconductor products. Measures on the systems such
as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent
physical injury, fire, social damages, for example, by using the products.
(7) When using products for which damp-proof packing is required, observe the conditions (including shelf life
and amount of time let standing of unsealed items) agreed upon when specification sheets are individually
exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
DataSheet4U.com
DataSheet4 U .com
2003 SEP