MB91460.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 MB91460 데이타시트 다운로드

No Preview Available !

www.DataSheet4U.com
Fujitsu Microelectronics Europe
User Guide
FMEMCU-UG-910014-13
MB91460 SERIES
EVALUATION BOARD
SK-91F467D-208PFV
USER GUIDE
DataSheet4 U .com

No Preview Available !

www.DataSheet4U.com
SK-91F467D-208PFV V1.1
Revision History
Revision History
Date
Issue
22.11.2005
28.03.2006
13.04.2006
04.06.2006
V1.0, UMa,
first official version
V1.1, UMa
Updated the description of the SWB Monitor Debugger, which is now
located in the external flash.
V1.2, UMa
Added chapter “Internal Flash Programming”
V1.3, UMa
Changed chapter “Programming the Monitor Debugger”.
This document contains 60 pages.
FMEMCU-UG-910014-13
DataSheet4 U .com
- 2 - © Fujitsu Microelectronics Europe GmbH

No Preview Available !

www.DataSheet4U.com
SK-91F467D-208PFV V1.1
Warranty and Disclaimer
Warranty and Disclaimer
To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts
its warranties and its liability for the SK-91F467D-208PFV and all its deliverables (eg. software
include or header files, application examples, target boards, evaluation boards, engineering samples
of IC’s etc.), its performance and any consequential damages, on the use of the Product in
accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under
which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all
accompanying written materials. In addition, to the maximum extent permitted by applicable law,
Fujitsu Microelectronics Europe GmbH disclaims all warranties and liabilities for the performance of
the Product and any consequential damages in cases of unauthorised decompiling and/or reverse
engineering and/or disassembling. Note, the SK-91F467D-208PFV board and all its deliverables
are intended and must only be used in an evaluation laboratory environment.
1. Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in
accordance with the accompanying written materials for a period of 90 days form the date of
receipt by the customer. Concerning the hardware components of the Product, Fujitsu
Microelectronics Europe GmbH warrants that the Product will be free from defects in material
and workmanship under use and service as specified in the accompanying written materials
for a duration of 1 year from the date of receipt by the customer.
2. Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH’s entire liability
and the customer’s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH’s
sole discretion, either return of the purchase price and the license fee, or replacement of the
Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in
original packing and without further defects resulting from the customer’s use or the transport.
However, this warranty is excluded if the defect has resulted from an accident not attributable
to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the
customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH.
3. To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH
disclaims all other warranties, whether expressed or implied, in particular, but not limited to,
warranties of merchantability and fitness for a particular purpose for which the Product is not
designated.
4. To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH’s
and its suppliers´ liability is restricted to intention and gross negligence.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES
To the maximum extent permitted by applicable law, in no event shall Fujitsu
Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever
(including but without limitation, consequential and/or indirect damages for personal
injury, assets of substantial value, loss of profits, interruption of business operation,
loss of information, or any other monetary or pecuniary loss) arising from the use of
the Product.
Should one of the above stipulations be or become invalid and/or unenforceable, the remaining
stipulations shall stay in full effect.
© Fujitsu Microelectronics Europe GmbH
DataSheet4 U .com
-3-
FMEMCU-UG-910014-13

No Preview Available !

www.DataSheet4U.com
SK-91F467D-208PFV V1.1
Contents
Contents
REVISION HISTORY.............................................................................................................. 2
WARRANTY AND DISCLAIMER ........................................................................................... 3
CONTENTS ............................................................................................................................ 4
1 INTRODUCTION................................................................................................................ 7
1.1 Abstract ..................................................................................................................... 7
1.2 Features .................................................................................................................... 8
1.3 General Description .................................................................................................. 9
1.3.1 On Board Memory..................................................................................... 10
1.3.2 MCU Clocks .............................................................................................. 10
1.3.3 MCU Operating Mode ............................................................................... 10
1.3.4 External Bus interface Connectors............................................................ 10
1.3.5 CAN Bus ................................................................................................... 10
1.3.6 RS-232 and LIN ........................................................................................ 10
1.3.7 MCU Pins .................................................................................................. 10
1.3.8 User Buttons ............................................................................................. 10
1.3.9 User LEDs and Optional LCD ................................................................... 11
1.3.10 Power Supply ............................................................................................ 11
2 INSTALLATION ............................................................................................................... 12
2.1 Jumper Settings ...................................................................................................... 14
2.2 Jumper Location ..................................................................................................... 15
2.3 Software Installation................................................................................................ 16
2.3.1 Installation of Softune Workbench ............................................................ 16
3 JUMPERS AND SWITCHES ........................................................................................... 17
3.1 MCU Operating-Mode (S5) ..................................................................................... 17
3.2 Power Supply .......................................................................................................... 18
3.2.1 MCU Power Supply Voltage...................................................................... 20
3.2.2 MCU Analogue Power Supply Voltage ..................................................... 20
3.3 CAN0 – CAN2 ......................................................................................................... 22
3.4 LIN / RS-232 UART................................................................................................. 22
3.4.1 UART 2 ..................................................................................................... 23
3.4.2 UART 4 (Flash Programming)................................................................... 24
3.4.3 UART 5 ..................................................................................................... 25
3.5 User Push Buttons INT0, INT1, INT2 and ICU0/TIN0............................................. 26
3.6 User DIP Switch 8 Bit (S4) ...................................................................................... 26
FMEMCU-UG-910014-13
- 4 - © Fujitsu Microelectronics Europe GmbH
DataSheet4 U .com

No Preview Available !

www.DataSheet4U.com
SK-91F467D-208PFV V1.1
Contents
3.7 Reset Generation .................................................................................................... 27
4 CONNECTORS................................................................................................................ 29
4.1 Power Connector (X5)............................................................................................. 29
4.2 UART / LIN Connector (X1, X4, X8)........................................................................ 29
4.3 CAN Connector (X9, X10, X11) .............................................................................. 30
4.4 USER-LEDs and Optional LC-Display (D1-D16, J6)............................................... 31
4.5 In-Circuit-Programming Connector (X12)................................................................ 32
4.6 MCU Pin Connectors (J1-J4) .................................................................................. 32
4.7 External Bus Connectors (X13, X14) ...................................................................... 33
4.7.1 VG96ABC DIN 41612 (X13)...................................................................... 33
4.7.2 VG48ABC DIN 41612 (X14)...................................................................... 34
4.7.3 Distance between VG-Connectors............................................................ 34
5 GETTING STARTED ....................................................................................................... 35
5.1 Introduction to Softune Workbench......................................................................... 35
5.2 Project Start-up ....................................................................................................... 37
5.2.1 Create a New Project: ............................................................................... 37
5.3 Softune Workbench Monitor Debugger................................................................... 39
5.3.1 General Description .................................................................................. 39
5.3.2 Starting the SWB Monitor Debugger......................................................... 40
5.3.3 Basic Debugger Features ......................................................................... 42
5.4 Advanced Softune Workbench SWB Monitor Debugger Features ......................... 44
5.5 Memory Configuration............................................................................................. 46
6 PROGRAMMING THE INTERNAL FLASH..................................................................... 47
7 PROGRAMMING THE SWB MONITOR DEBUGGER .................................................... 51
8 TROUBLE SHOOTING.................................................................................................... 52
9 SILK-PLOT OF THE BOARD .......................................................................................... 53
9.1 Top Side.................................................................................................................. 53
9.2 Bottom Side ............................................................................................................ 54
10 PCB HISTORY................................................................................................................. 55
10.1 SK-91F467-208PFV V1.0 ....................................................................................... 55
© Fujitsu Microelectronics Europe GmbH
DataSheet4 U .com
-5-
FMEMCU-UG-910014-13